Lockdown Protocol

Lockdown Protocol presents an interesting test for the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3050 4 GB pairing. The recorded data shows a system that is clearly capable of delivering playable frame rates, but only under specific conditions. The benchmark results indicate a strong performance at 1080p, a more constrained situation at 1440p, and a definitive wall at 4K. This analysis breaks down the measured FPS across resolutions and settings, identifies the optimal configurations, and contextualizes the combo’s standing within the database.

Measured FPS Breakdown

The measurements for this combo in Lockdown Protocol reveal a clear pattern of performance scaling. At 1920x1080, the system demonstrates its strongest results. With Low settings, the average frame rate reaches 114.5 FPS. Moving to Medium settings, the average drops to 81 FPS. High settings produce an average of 69.9 FPS, and the most demanding Ultra preset yields 53.8 FPS. These numbers show a steady decline as graphical fidelity increases, but the system remains fluid through the High preset.

At 2560x1440, the performance takes a noticeable step back. The Low preset still delivers a very playable average of 83.2 FPS. The Medium preset falls to 56.8 FPS, which sits just below the 60 FPS threshold. High settings produce 50.3 FPS, and Ultra drops further to 40.4 FPS. The gap between Low and Medium at this resolution is substantial, indicating a significant performance cost for the next tier of visual quality.

The 3840x2160 results are the most demanding. At this resolution, even the Low preset only manages an average of 50.3 FPS. Medium settings produce 38.1 FPS, High drops to 32.8 FPS, and Ultra bottoms out at 23.5 FPS. None of these configurations reach the playable threshold, confirming that this hardware combination is not suited for 4K gaming in this title. The data shows a consistent and predictable scaling of performance across all three resolutions and four presets.

Best Settings per Resolution

The database’s playable threshold is set at 60 FPS. Using this metric, the best settings for each resolution are determined by finding the most demanding preset that stays at or above that mark.

For 1920x1080, the best settings are High, with an average FPS of 69.9. This is the optimal balance, as it provides a significant visual upgrade over Medium while still maintaining a comfortable margin above the 60 FPS threshold. The Ultra preset, at 53.8 FPS, falls short of the target, so High is the clear choice for maximum quality without sacrificing playability.

At 2560x1440, the options are more limited. Only the Low preset achieves a playable frame rate, with an average of 83.2 FPS. The Medium preset drops to 56.8 FPS, which is below the threshold. Therefore, Low is the only viable setting for a smooth experience at this resolution. The jump from Low to Medium is too costly for this hardware.

For 3840x2160, the verdict is clear: there are no playable settings. The best result is the Low preset at 50.3 FPS, which still falls short of the 60 FPS requirement. This resolution is simply out of reach for the AMD Ryzen 5 3600 and RTX 3050 4 GB combination in Lockdown Protocol.

How This Combo Ranks

Within the database, this specific combination of the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3050 4 GB holds a rank of 3263 out of 3714 tested combos for this game. This places it in the lower percentile of systems tested. The rank reflects the GPU’s limitations, particularly its 4 GB memory capacity and the performance demands of the game at higher settings.

The percentile ranking for the CPU alone is 71, meaning it outperforms a majority of all tested processors in general benchmarks. However, the GPU’s percentile is 50, indicating it sits exactly in the middle of all tested graphics cards. The combination of a strong CPU and a mid-range GPU results in a system that is heavily constrained by its graphics component when playing Lockdown Protocol. The low combo rank is a direct consequence of the GPU struggling at higher resolutions and presets.

Similar Performance Alternatives

The CPU’s nearest rivals provide context for its performance level. The AMD Ryzen 5 3600 has an average benchmark score of 17035. The Intel Core i7-1260P is nearly identical, with a score of 17007, a difference of only 0.2 percent. The AMD EPYC 7742 is also close at 16998, another 0.2 percent difference. On the other side, the Intel Core i5-11400 scores 17067, and the AMD EPYC 7573X scores 17070, both just 0.2 percent higher. These results indicate that the Ryzen 5 3600 offers a processing capability that is on par with a range of mobile and server chips, confirming it is not the bottleneck in this system.

The GPU has no nearest rivals listed in the database, which means there is no direct comparative data for other graphics cards at this performance level. The analysis must therefore rely on the measured FPS and the GPU’s own specifications. The RTX 3050 4 GB is built on the Ampere architecture with 2048 shading units and 4 GB of GDDR6 memory on a 128-bit bus. Its performance in Lockdown Protocol is the defining factor for this combo, and the absence of rival data highlights its unique position in the database.

CPU and GPU Roles

The interaction between the CPU and GPU in Lockdown Protocol is revealed by the scaling of frame rates across resolutions and presets. The data shows that the GPU is the primary limiting factor.

At 1920x1080, the system can produce 114.5 FPS on Low settings. This high frame rate suggests that the CPU is capable of feeding the GPU with enough data to reach a high performance level. As the resolution increases to 2560x1440, the Low preset drops to 83.2 FPS, and at 3840x2160, it falls to 50.3 FPS. This consistent decline with increasing resolution is a classic sign of GPU limitation. The CPU’s workload does not change significantly with resolution, but the GPU’s does, and the frame rate drops accordingly.

The preset scaling further supports this. At 1080p, moving from Low to Medium reduces the average FPS by 33.5, from 114.5 to 81. At 1440p, the same settings change reduces the average by 26.4, from 83.2 to 56.8. At 4K, the drop is 12.2, from 50.3 to 38.1. The fact that the absolute FPS drops are smaller at higher resolutions, even though the percentage drop is similar, indicates that the GPU is already saturated. The CPU, with its 6 cores and 12 threads, has enough headroom to handle the game’s logic, but the RTX 3050 4 GB cannot maintain high frame rates as the pixel count and graphical load increase.

The data points to a system where the GPU is the decisive component. The CPU, which ranks in the 71st percentile, is more than adequate for this game. The GPU, which sits in the 50th percentile, is the bottleneck that determines the playable settings and resolutions.

The Verdict

Can this PC run Lockdown Protocol? The answer depends entirely on the target resolution. Based on the verdict by resolution, the system is fully capable at 1920x1080. The data shows that High settings achieve an average of 69.9 FPS, which clears the 60 FPS threshold. The Medium and Low presets also run above 60 FPS, at 81 and 114.5 FPS respectively. Only the Ultra preset, at 53.8 FPS, fails to meet the target. For 1080p gamers, this system provides a smooth experience with high visual quality.

At 2560x1440, the system is only playable on Low settings, with an average of 83.2 FPS. This will run the game comfortably, but users will have to accept the lowest visual fidelity. The Medium, High, and Ultra presets all fall below the 60 FPS threshold, making them unsuitable for a consistent frame rate.

At 3840x2160, the system cannot play the game at a playable frame rate. The best average is 50.3 FPS on Low settings, which is below the threshold. No preset at this resolution is playable. This combination is not recommended for 4K gaming in Lockdown Protocol. The verdict is clear: this is a 1080p machine for this title, with limited 1440p capabilities on the lowest settings.

FAQ

Q: Can the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3050 4 GB run Lockdown Protocol at 1080p?

A: Yes. The database shows playable frame rates at 1080p for the Low, Medium, and High presets. The best settings are High, which achieves an average of 69.9 FPS.

Q: What is the best settings preset for 1440p with this combo?

A: The only playable preset at 2560x1440 is Low, which produces an average of 83.2 FPS. All other presets fall below the 60 FPS threshold.

Q: Is this system capable of 4K gaming in Lockdown Protocol?

A: No. At 3840x2160, the best result is 50.3 FPS on Low settings, which is below the 60 FPS playable threshold. No preset is playable at this resolution.

Q: How does this combo rank compared to other tested systems?

A: The combination of the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3050 4 GB ranks 3263 out of 3714 tested combos for Lockdown Protocol.

Q: Which component is the bottleneck for this system in this game?

A: The data indicates the GPU is the limiting factor. Frame rates drop significantly with increased resolution and settings, while the CPU’s performance, which ranks in the 71st percentile, is sufficient for the game’s demands.

Q: The GPU has no listed rivals, what does that mean?

A: The database has no nearest rivals recorded for the NVIDIA GeForce RTX 3050 4 GB, meaning there is no direct comparative performance data for other graphics cards. The analysis relies on the measured FPS and the GPU’s specifications to determine its performance.