Lockdown Protocol

How This Combo Ranks

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 5050 sits at rank 2293 out of 3714 tested combos for Lockdown Protocol. This places the configuration in the lower-middle portion of the database, roughly in the 38th percentile of all recorded CPU-GPU pairings. The combo is not near the top of the charts, but it is also far from the bottom, indicating a workable setup for this title.

The CPU itself holds a percentile of 75 against all processors in the database, while the GPU sits at percentile 66 against all graphics cards. However, the combined rank in this specific game is lower than either component's individual standing. This suggests that Lockdown Protocol stresses the pairing in a way that does not fully translate the component-level scores into a higher combined ranking. The measured data confirms that the system is capable of producing playable frame rates at several settings, but the overall position among 3714 combos shows that many other systems deliver higher performance in this specific workload.

CPU and GPU Roles

Looking at the measured FPS across resolutions and presets, the RTX 5050 is clearly the dominant factor for Lockdown Protocol. At 1920x1080, the Low preset averages 168 FPS. When the resolution increases to 2560x1440, Low drops to 123 FPS, a decline of 45 FPS. Moving to 3840x2160 Low yields 79 FPS, another 44 FPS reduction. This steep scaling with resolution points to a GPU-bound scenario at lower settings.

At the High preset, the pattern continues but with smaller absolute deltas. From 1080p High at 104 FPS to 1440p High at 76 FPS, the drop is 28 FPS. From 1440p to 4K High, the drop is 27 FPS, landing at 49 FPS. The consistent reduction across resolution steps indicates the graphics card is the limiting factor throughout.

The CPU's role becomes more visible when comparing presets at a fixed resolution. At 1080p, the gap between Low (168 FPS) and Ultra (78 FPS) is 90 FPS, showing that the GPU handles the extra graphical load. But at 4K, the gap between Low (79 FPS) and Ultra (37 FPS) is 42 FPS, a smaller absolute range. This compression at higher resolutions is typical of a GPU-limited system, where the render load overwhelms the graphics card before the CPU can become a constraint. The Ryzen 5 2600, with its 6 cores and 12 threads, appears sufficient to feed the RTX 5050 at lower resolutions, but the GPU's raw throughput caps the maximum frame rates.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest results. Low settings average 168 FPS. Medium averages 119 FPS, with a minimum of 101 FPS and a maximum of 137 FPS. High averages 104 FPS. Ultra averages 78 FPS. All four presets clear the 60 FPS threshold, and the minimum recorded frame rate at Medium (101 FPS) is well above the playable mark.

Moving to 2560x1440, performance drops but remains playable for most presets. Low averages 123 FPS. Medium averages 87 FPS, with a minimum of 74 FPS and a maximum of 100 FPS. High averages 76 FPS. Ultra averages 57 FPS, which falls below the 60 FPS playable line. The minimum at Medium (74 FPS) still holds above 60 FPS, but the Ultra preset cannot sustain a consistent 60 FPS experience.

At 3840x2160, the results are more restrictive. Low averages 79 FPS. Medium averages 56 FPS, with a minimum of 48 FPS and a maximum of 65 FPS. High averages 49 FPS. Ultra averages 37 FPS. Only the Low preset stays above the 60 FPS average threshold. The Medium preset's minimum of 48 FPS shows that even the middle setting can dip below 50 FPS, making it unsuitable for a smooth experience at this resolution.

FAQ

Q: Can this PC run Lockdown Protocol at 1080p with Ultra settings?

A: Yes. The measured average FPS at 1920x1080 Ultra is 78 FPS, which is above the 60 FPS playable threshold.

Q: What is the best playable preset at 1440p?

A: The High preset is the most demanding setting that stays playable, averaging 76 FPS at 2560x1440. Ultra falls to 57 FPS, below the playable line.

Q: Is 4K gaming possible with this combo?

A: Only at Low settings. The 3840x2160 Low preset averages 79 FPS. Medium averages 56 FPS, High averages 49 FPS, and Ultra averages 37 FPS, all below 60 FPS.

Q: How does the GPU compare to its nearest rivals?

A: The RTX 5050 has an average benchmark score of 21035. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% higher. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 2600 has an average benchmark score of 21484. The Intel Core Ultra 5 228V scores 21440, which is 0.2% lower. The Intel Core i9-11900H scores 21367, 0.5% lower. The Intel Xeon D-1746TER scores 21635, 0.7% higher. The AMD EPYC 9454 scores 21223, 1.2% lower.

Q: What is the minimum FPS recorded at 1080p Medium?

A: The minimum FPS at 1920x1080 Medium is 101 FPS, with an average of 119 FPS and a maximum of 137 FPS.

Similar Performance Alternatives

The nearest rivals to the RTX 5050 in the database provide a sense of what other GPUs would deliver similar frame rates. The AMD Radeon RX Vega M GL scores 0.6% higher on average, meaning it would behave nearly identically in Lockdown Protocol. The AMD Radeon HD 8970M is 1% higher, also a close match. The AMD Radeon RX 5600 XT is 1.6% lower, slightly weaker but still in the same performance band. The NVIDIA RTX A4000 Mobile is 1.6% higher, again within a small margin. Any of these cards would produce frame rates within a few percent of the RTX 5050's measured results, so users with those GPUs should expect similar playability at each resolution and preset.

For the CPU side, the Ryzen 5 2600's nearest rivals are all within a narrow range. The Intel Core Ultra 5 228V is 0.2% lower, the Intel Core i9-11900H is 0.5% lower, the Intel Xeon D-1746TER is 0.7% higher, and the AMD EPYC 9454 is 1.2% lower. These processors would not meaningfully change the frame rates in Lockdown Protocol, given that the GPU is the limiting factor at most settings. The pairing's performance is therefore representative of what these neighboring CPUs would produce when combined with the RTX 5050.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the most demanding option that stays at or above 60 FPS. The measured average is 78 FPS, which clears the threshold with a comfortable margin. This is the recommended setting for 1080p.

At 2560x1440, the High preset is the highest quality setting that maintains 60 FPS or better. The average FPS at High is 76. The Ultra preset drops to 57 FPS, so High is the optimal choice for a smooth experience at this resolution.

At 3840x2160, only the Low preset achieves an average above 60 FPS. The measured average is 79 FPS. Medium falls to 56 FPS, so Low is the only viable option for 4K play with this combination.

The Verdict

The data shows that this PC can run Lockdown Protocol, but the experience depends heavily on the chosen resolution and preset. At 1920x1080, all four presets clear the 60 FPS threshold, with the Ultra preset averaging 78 FPS. This is the strongest scenario for the combo, offering full graphical fidelity at a playable frame rate.

At 2560x1440, the system remains playable at High settings with an average of 76 FPS. Low and Medium also clear 60 FPS, but Ultra does not, averaging 57 FPS. Users seeking higher visual quality at 1440p should stick with High.

At 3840x2160, the options narrow significantly. Only Low settings produce an average above 60 FPS, at 79 FPS. Medium, High, and Ultra all fall below the playable line, with averages of 56, 49, and 37 FPS respectively. The verdict by resolution confirms this: 4K is playable only at Low, 1440p is playable up to High, and 1080p is playable at all presets including Ultra. For those who prioritize frame rate stability over visual fidelity, the system delivers a competent experience at 1080p and 1440p, while 4K requires significant graphical compromises.