Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Lockdown Protocol
FPS 2024

Lockdown Protocol

29%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
112 FPS
Ultra 1080p Measured
52 FPS

1440p (2K / QHD)

Low 1440p Measured
82 FPS
Ultra 1440p Measured
38 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
25 FPS
14.3ms Frame Time
21ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 21,484
Graphics Card
Required 27,646
Your GPU 0

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Available

Your GPU supports ray tracing but may impact FPS.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 25 33 38 53
1440p QHD 38 51 59 82
1080p Full HD 52 70 80 112

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 70
1920x1080 Low 112
1920x1080 Medium 80
1920x1080 Ultra 52
2560x1440 High 51
2560x1440 Low 82
2560x1440 Medium 59
2560x1440 Ultra 38
3840x2160 High 33
3840x2160 Low 53
3840x2160 Medium 38
3840x2160 Ultra 25

Performance Analysis: Lockdown Protocol on Your System

Similar Performance Alternatives

The AMD Ryzen 5 2600 sits at the 75th percentile among all CPUs in the database, with an average benchmark score of 21484. Its closest rivals are tightly clustered, with performance deltas under 1.5% in either direction. The Intel Core Ultra 5 228V scores 21440, a mere 0.2% behind the Ryzen 5 2600, making it effectively indistinguishable in CPU-bound workloads. The Intel Core i9-11900H posts 21367, which is 0.5% lower, while the Intel Xeon D-1746TER edges ahead with 21635, a 0.7% advantage. The AMD EPYC 9454 trails slightly at 21223, putting it 1.2% behind. For Lockdown Protocol, any of these processors would deliver nearly identical frame pacing in scenes where the CPU is the limiting factor, though the consumer parts (Ultra 5 228V and i9-11900H) are the more plausible drop-in comparisons for a gaming rig.

On the GPU side, the NVIDIA GeForce RTX 3050 4 GB occupies the 50th percentile among all GPUs, with no nearest rivals listed in the database. The absence of comparable GPUs in the immediate neighborhood means the RTX 3050 4 GB stands alone in this tier, but its 4 GB GDDR6 memory, 128-bit bus, and 192.0 GB/s bandwidth define its performance envelope. The card's 2048 shading units, 64 TMUs, and 32 ROPs, along with 16 RT cores and 64 tensor cores, place it as an entry-level Ampere part. In practice, the database shows this combo ranking 3269 out of 3714 tested combinations for Lockdown Protocol, which puts it in the lower portion of the field. Users coming from a GTX 1650 or an RX 6400 would see similar behavior, though those parts are not listed as direct rivals here.

CPU and GPU Roles

The recorded FPS data reveals a clear pattern: the RTX 3050 4 GB is the dominant bottleneck at higher resolutions, while the Ryzen 5 2600 becomes more relevant at lower settings and resolutions. At 3840x2160, the GPU's limited memory bandwidth and 4 GB capacity constrain performance across all presets. The delta between Low and Ultra at 4K is 28 FPS (53 to 25), which is a 112% swing driven almost entirely by the GPU's ability to fill pixels and manage texture data. At 2560x1440, the same comparison shows a 44 FPS spread (82 to 38), a 116% increase from Low to Ultra. At 1920x1080, the spread is 60 FPS (112 to 52), a 115% jump, again pointing to GPU-bound scaling.

However, the CPU's role becomes visible when comparing resolutions at the same preset. At Low settings, 1080p yields 112 FPS, 1440p drops to 82 FPS (a 26.8% reduction), and 4K falls to 53 FPS (a 52.7% reduction from 1080p). This scaling is steeper than what a purely GPU-bound scenario would show, indicating that the Ryzen 5 2600's six cores and twelve threads, with a boost clock of 3.90 GHz, can feed the GPU adequately at 1080p Low, but the GPU starts to cap out as resolution rises. At Medium settings, the pattern holds: 80 FPS at 1080p, 59 at 1440p, and 38 at 4K. The min FPS values at Medium (68 at 1080p, 50 at 1440p, 32 at 4K) show that frame time consistency degrades with resolution, reinforcing the GPU-centric nature of the workload. The CPU's single-thread performance, measured at 2239 in PassMark, is sufficient for this game's engine at 1080p, but at 4K the GPU's fill rate and memory subsystem are the clear limiters.

Measured FPS Breakdown

At 1920x1080, the RTX 3050 4 GB and Ryzen 5 2600 combination delivers its strongest results. Low settings produce an average of 112 FPS, with no recorded min or max values in the database. Medium settings average 80 FPS, with a minimum of 68 and a maximum of 92, indicating a stable frame window. High settings average 70 FPS, again without min or max data. Ultra settings drop to an average of 52 FPS, below the 60 FPS playable threshold. The progression from Low to Ultra shows a 60 FPS difference, with the most significant single-step drop occurring between Medium (80 FPS) and High (70 FPS), a 12.5% reduction.

At 2560x1440, performance falls off noticeably. Low settings average 82 FPS, which is still above the 60 FPS threshold. Medium settings average 59 FPS, just shy of playable, with a minimum of 50 and a maximum of 67. High settings average 51 FPS, and Ultra drops to 38 FPS. The gap between Low and Ultra at 1440p is 44 FPS. The Medium preset's min FPS of 50 shows that even when the average hovers near playable, dips can be significant, which matters for a fast-paced FPS.

At 3840x2160, the combo struggles. Low settings average 53 FPS, below the 60 FPS threshold. Medium averages 38 FPS, with a minimum of 32 and a maximum of 43. High averages 33 FPS, and Ultra averages 25 FPS. No preset at 4K reaches the playable threshold, and even Low falls 7 FPS short. The gap between Low and Ultra at 4K is 28 FPS, the smallest absolute spread across all resolutions, confirming that the GPU is saturated at every preset.

The Verdict

The data shows that this PC can run Lockdown Protocol, but only at specific resolutions and presets. At 1920x1080, the system clears the 60 FPS threshold on Low (112 FPS), Medium (80 FPS), and High (70 FPS). Ultra falls short at 52 FPS. At 2560x1440, only Low hits the mark, averaging 82 FPS; Medium (59 FPS), High (51 FPS), and Ultra (38 FPS) all miss. At 3840x2160, no preset reaches 60 FPS, with the best result being Low at 53 FPS.

For a competitive FPS like Lockdown Protocol, the playable settings at 1080p are generous: High at 70 FPS is a comfortable target, and Medium at 80 FPS offers headroom for demanding scenes. At 1440p, players must drop to Low to maintain playability, which sacrifices visual fidelity but keeps the average at 82 FPS. The 4K resolution is effectively out of reach for this combination. The verdict by resolution is clear: 1080p supports High, Medium, and Low; 1440p supports only Low; 4K supports nothing at or above 60 FPS. The combo's rank of 3269 out of 3714 reflects this middling standing, but it does not preclude a playable experience at lower resolutions and settings.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 70 FPS. This is the recommended setting for 1080p, as it provides the best visual quality while maintaining a 10 FPS margin above the playable threshold. Medium (80 FPS) and Low (112 FPS) are also viable, but High offers the best balance.

At 2560x1440, the only preset that clears 60 FPS is Low, averaging 82 FPS. This is the best setting for 1440p, and it comes with a substantial 22 FPS margin. Medium averages 59 FPS, just one frame below the threshold, so players with a tolerance for occasional dips might consider it, but the recorded min of 50 FPS makes it a risky choice for competitive play.

At 3840x2160, no preset reaches 60 FPS. The best average is Low at 53 FPS, which is 7 FPS below the threshold. There is no recommended setting at 4K, as even the lowest preset fails to deliver playable performance. Players targeting 4K would need to reduce resolution scaling or accept sub-60 FPS frame rates, though the database does not include such adjustments.

FAQ

Q: Can this PC run Lockdown Protocol at 1080p with High settings?

A: Yes. At 1920x1080 with High settings, the combination of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3050 4 GB averages 70 FPS, which clears the 60 FPS playable threshold.

Q: What is the best playable setting at 1440p?

A: The only playable setting at 2560x1440 is Low, which averages 82 FPS. Medium falls just short at 59 FPS, so Low is the recommended choice for maintaining playability.

Q: Is 4K playable with this hardware?

A: No. At 3840x2160, the best average FPS is 53 at Low settings, which is below the 60 FPS threshold. Medium averages 38 FPS, High averages 33 FPS, and Ultra averages 25 FPS.

Q: How much faster is 1080p Low compared to 1080p Ultra?

A: At 1920x1080, Low averages 112 FPS while Ultra averages 52 FPS, a difference of 60 FPS. Low is more than double the frame rate of Ultra.

Q: What are the min and max FPS at Medium settings across resolutions?

A: At 1920x1080 Medium, the min is 68 FPS and the max is 92 FPS. At 2560x1440 Medium, the min is 50 FPS and the max is 67 FPS. At 3840x2160 Medium, the min is 32 FPS and the max is 43 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 2600's average benchmark score of 21484 is 0.2% ahead of the Intel Core Ultra 5 228V (21440), 0.5% ahead of the Intel Core i9-11900H (21367), 0.7% behind the Intel Xeon D-1746TER (21635), and 1.2% ahead of the AMD EPYC 9454 (21223). These deltas are negligible for gaming performance.