Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
309 FPS
Ultra 1080p Measured
147 FPS

1440p (2K / QHD)

Low 1440p Measured
222 FPS
Ultra 1440p Measured
106 FPS

4K (Ultra HD)

Low 4K Measured
140 FPS
Ultra 4K Measured
66 FPS
6.5ms Frame Time
10ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 84,003
Graphics Card
Required 27,118
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 66 70 112 140
1440p QHD 106 111 178 222
1080p Full HD 147 155 247 309

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 155
1920x1080 Low 309
1920x1080 Medium 247
1920x1080 Ultra 147
2560x1440 High 111
2560x1440 Low 222
2560x1440 Medium 178
2560x1440 Ultra 106
3840x2160 High 70
3840x2160 Low 140
3840x2160 Medium 112
3840x2160 Ultra 66

Performance Analysis: Inside on Your System

The Intel Core Ultra 9 290K Plus paired with the AMD Radeon RX 9060 is an exceptionally powerful combination for running Inside, a puzzle platformer from 2016. Benchmark data indicates that this system not only clears the 60 FPS playability threshold at every tested resolution and preset but does so with massive headroom, delivering over 100 FPS on average at 1440p Ultra and 147 FPS at 1080p Ultra. The primary constraint is not the CPU or GPU horsepower, but the game's age relative to this modern hardware.

Similar Performance Alternatives

The data shows that the installed CPU and GPU each have direct performance counterparts that would yield nearly identical results in Inside. For the processor, the Intel Core Ultra 9 290K Plus exhibits an average benchmark score of 84003, placing it in the 96th percentile of all CPUs. Its closest rival is the Intel Core Ultra 9 285K, which scores 83807, a negligible delta of 0.2%. This means a system with the 285K would perform virtually indistinguishably from this one in a game like Inside, which is not heavily threaded. Other near-equal alternatives include the AMD EPYC 4584PX (score 83090, 1.1% delta) and the AMD EPYC 9135 (score 82980, 1.2% delta), both of which are within a single percentage point of the 290K Plus. While these are server-class chips, their benchmark scores indicate they would provide similar compute throughput for this task. The AMD EPYC 7F72 is slightly faster on average with a score of 85072, representing a -1.3% delta, meaning it is 1.3% ahead of the 290K Plus.

On the graphics side, the AMD Radeon RX 9060 has an average benchmark score of 16014, which places it in the 59th percentile of all GPUs. Its closest rival is the NVIDIA GeForce RTX 3060 Ti, which scores 16129, a delta of -0.7%, indicating the RTX 3060 Ti is marginally faster. A gamer using either card would see nearly the same frame rates in Inside. The AMD Radeon RX 7700 (score 15852, 1% delta) and the AMD Radeon R9 370X (score 15862, 1% delta) are also within a single percentage point of the RX 9060, making them equivalent alternatives in terms of raw graphics processing power. The AMD Radeon Pro W5500 is slightly slower, with a score of 15679, representing a 2.1% delta. For the specific demands of Inside, any of these GPUs would provide a very similar experience.

CPU and GPU Roles

Given the nature of Inside as a puzzle platformer with a 2016 release date, the benchmark results indicate that the GPU is the primary scaling factor across resolutions, while the CPU provides ample headroom. The data shows a clear pattern of performance scaling with resolution, which is characteristic of GPU-bound workloads. At 1080p with High settings, the system achieves an average of 155 FPS. Moving to 1440p High reduces the average to 111 FPS, a 28% decrease in performance. At 4K High, the average further drops to 70 FPS, which is a 37% decrease from the 1440p result. This consistent decline with increasing pixel count demonstrates that the graphics card is the limiting component.

The CPU's role is less pronounced but still essential for maintaining high frame rates. The Intel Core Ultra 9 290K Plus, with its 24 cores and 24 threads and a boost clock of 5.80 GHz, is far more powerful than what Inside requires. This is evidenced by the exceptional Low preset performance: 309 FPS at 1080p, 222 FPS at 1440p, and 140 FPS at 4K. These numbers suggest that even at lower graphical settings, the system is not constrained by the processor. The scaling from Low to Ultra at each resolution shows the GPU's load increasing, while the CPU remains capable of feeding it frames. For instance, at 1440p, moving from Low (222 FPS) to Ultra (106 FPS) cuts performance by more than half, underscoring that the graphics settings have a far greater impact on performance than the CPU choice. The CPU is effectively a non-bottleneck in this configuration.

How This Combo Ranks

In the context of all tested hardware combinations for Inside, this specific pairing ranks 2129 out of 3716 combos. While this places it in the lower half of the ranking, it is crucial to interpret this figure correctly. This ranking is likely influenced by the fact that the database includes many older or more modest systems that are perfectly adequate for a 2016 puzzle platformer, as well as the high resolution and setting combinations tested. A rank of 2129 out of 3716 does not indicate poor performance; rather, it suggests that a significant number of less expensive or older configurations can also run this game well. The absolute FPS numbers, which are all well above the 60 FPS threshold, are the more relevant metric for potential players. This combo is not at the top of the ranking because Inside is not a demanding title, so the massive power of the Core Ultra 9 290K Plus and Radeon RX 9060 is not fully utilized, allowing many weaker systems to achieve similar playable results. The system is overqualified for this specific game, resulting in a mid-pack ranking despite delivering excellent absolute performance.

The Verdict

The benchmark data is unequivocal: this PC can run Inside flawlessly. According to the verdict by resolution, every single resolution and preset combination tested achieves an average frame rate above the 60 FPS playability threshold. At 4K, the system is fully playable on all settings, with the most demanding Ultra preset delivering an average of 66 FPS. At 1440p, performance is even stronger, with Ultra settings producing an average of 106 FPS. At the most common 1080p resolution, the system excels, hitting 147 FPS on Ultra and 309 FPS on Low. This confirms that the Intel Core Ultra 9 290K Plus and AMD Radeon RX 9060 combination provides a flawless experience for Inside, with enough power to run the game at maximum graphical fidelity at 4K and to take full advantage of high-refresh-rate monitors at lower resolutions. There are no playability concerns at any tested setting.

Measured FPS Breakdown

The measured FPS data provides a detailed view of performance across all resolutions and settings. At 3840x2160, the system delivers an average of 70 FPS on High, 140 FPS on Low, and 112 FPS on Medium. The Medium preset shows a minimum of 95 FPS and a maximum of 128 FPS, indicating solid frame pacing. The most demanding Ultra preset at 4K yields an average of 66 FPS. Moving to 2560x1440, performance scales up significantly. The High preset averages 111 FPS, Low averages 222 FPS, and Medium averages 178 FPS, with a minimum of 151 FPS and a maximum of 204 FPS. The Ultra preset at 1440p achieves a strong average of 106 FPS. At 1920x1080, the system demonstrates its full potential. High settings produce an average of 155 FPS, while Low settings hit an impressive 309 FPS. The Medium preset averages 247 FPS, with a minimum of 210 FPS and a maximum of 284 FPS. The Ultra preset at 1080p remains highly playable with an average of 147 FPS. A clear trend emerges: the average FPS nearly doubles when moving from 4K to 1440p and doubles again from 1440p to 1080p, highlighting the GPU's scaling with resolution.

Best Settings per Resolution

For players seeking the highest visual quality without dropping below the 60 FPS threshold, the data identifies the optimal settings for each resolution. At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 66 FPS. This allows for a fully maxed-out visual experience at 4K. At 2560x1440, the Ultra preset is also the best choice, delivering a more comfortable average of 106 FPS, providing ample headroom for smooth gameplay. At 1920x1080, the Ultra preset is again the top setting, with an average of 147 FPS. This performance level is ideal for high-refresh-rate monitors, as it ensures the frame rate will stay well above the 60 FPS target even during the most complex scenes. In summary, the system is capable of running Inside at its highest graphical preset at every resolution tested, with the minimum 4K Ultra average of 66 FPS still being comfortably above the playability threshold.