Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 99 | 104 | 167 | 209 |
| 1440p QHD | 158 | 166 | 264 | 286 |
| 1080p Full HD | 220 | 231 | 294 | 319 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
Measured FPS Breakdown
At 3840x2160, the recorded data shows a wide spread between presets. Low settings produce an average of 209 FPS, while Medium drops to 167 FPS with a minimum of 142 FPS and a maximum of 192 FPS. High settings average 104 FPS, and Ultra sits at 99 FPS. Neither Low, High, nor Ultra have recorded min/max values, but the Medium preset demonstrates a 50 FPS swing between its floor and ceiling.
Moving to 2560x1440, the pattern shifts upward substantially. Low settings reach 286 FPS average. Medium delivers 264 FPS with a minimum of 224 FPS and a maximum of 303 FPS, a 79 FPS spread. High settings average 166 FPS, and Ultra lands at 158 FPS. The gap between Low and Ultra at this resolution is 128 FPS, showing that the preset choice carries more weight than the resolution scaling alone.
At 1920x1080, the numbers climb further. Low settings hit 319 FPS average. Medium produces 294 FPS with a minimum of 250 FPS and a maximum of 338 FPS, an 88 FPS range. High settings average 231 FPS, and Ultra reaches 220 FPS. The difference between Low and Ultra here is 99 FPS, slightly narrower than at 1440p.
The data shows consistent behavior across all three resolutions: Medium is the only preset with complete min/max tracking, and the delta between Medium and High is significant at every resolution. At 4K, the Medium-to-High drop is 63 FPS. At 1440p, it is 98 FPS. At 1080p, it is 63 FPS. Meanwhile, the High-to-Ultra drop is much smaller: 5 FPS at 4K, 8 FPS at 1440p, and 11 FPS at 1080p. This suggests diminishing returns when pushing from High to Ultra, while the Medium-to-High step is where the largest performance cost occurs.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 99 FPS. That is 39 FPS above the playable threshold, leaving comfortable headroom. High settings average 104 FPS, so Ultra is the clear choice for maximum visual quality without sacrificing smoothness.
At 2560x1440, Ultra again qualifies as the best setting, averaging 158 FPS. This is 98 FPS above the 60 FPS threshold, which means there is substantial margin for demanding scenes or future driver overhead. High settings average 166 FPS, but since Ultra already clears the bar easily, there is no reason to drop down.
At 1920x1080, Ultra averages 220 FPS, which is 160 FPS above the threshold. This is the strongest result across all resolutions and presets. The data indicates that even the heaviest preset at 1080p is nowhere near stressing this combination.
The verdict is consistent: at every resolution, the Ultra preset is the recommended choice because it maintains an average well above 60 FPS. The minimum recorded FPS for any Ultra preset is not listed, but the averages are so far above the threshold that even a hypothetical 50% drop would still clear 60 FPS at 1440p and 1080p. At 4K, a drop to 50% would put the average near 50 FPS, but the recorded average of 99 FPS suggests typical frame times are stable.
CPU and GPU Roles
The scaling between resolutions reveals where the bottleneck lies. At 1080p, Low settings hit 319 FPS, but at 4K, Low settings drop to 209 FPS. That is a 110 FPS reduction, or roughly 34% fewer frames, when quadrupling the pixel count. The GPU is clearly the dominant factor at lower resolutions because the CPU can feed frames fast enough to expose the GPU's limits.
At 1440p, Low settings average 286 FPS, which is 33 FPS lower than 1080p Low. At 4K, Low drops another 77 FPS. This linear degradation with resolution is a classic GPU-bound pattern. The Intel Core Ultra 7 165H, with 16 cores and 22 threads, has enough processing headroom to avoid becoming the limiting factor even at 1080p where frame rates exceed 300.
However, the preset scaling tells a more nuanced story. At 4K, moving from Low to Medium costs 42 FPS, and from Medium to High costs another 63 FPS. At 1080p, the same Low-to-Medium step costs only 25 FPS, and Medium-to-High costs 63 FPS. The Medium-to-High cost is identical at both resolutions, which suggests that step is primarily GPU-bound. But the Low-to-Medium cost differs by resolution, indicating that at 4K, the GPU is already under load and the additional shading work from Medium settings compounds the cost.
The CPU's role is most visible at 1080p Low, where the 319 FPS average implies that the GPU is being fed as fast as it can render. The Core Ultra 7 165H's single-thread performance, reflected in its Cinebench R23 single-core score of 1759, is sufficient to avoid capping frame rates in this game. Inside is a Puzzle Platformer from 2016, and its rendering demands are modest compared to modern titles, so the CPU overhead per frame is low.
At 4K, the GPU is unquestionably the limiting factor. The RTX 4090's 82.58 TFLOPS FP32 throughput and 1.01 TB/s memory bandwidth are being taxed by the higher pixel count, but the CPU's 24 MB shared L3 cache and dual-channel memory bandwidth of 89.6 GB/s are not impeding results. The data shows that resolution scaling has a larger impact on frame rate than preset scaling, which is typical for a GPU-bound scenario at high pixel densities.
The practical takeaway: at 1080p and 1440p, the CPU has spare capacity, and the GPU is doing most of the work. At 4K, the GPU is still the primary constraint, but the CPU's headroom means there is no risk of CPU-induced stutters or frame drops. The recorded min/max values for Medium presets show consistent frame pacing at every resolution, which further supports the conclusion that neither component is causing irregular frame delivery.
The Verdict
This combination can run Inside at every resolution and every preset, with all twelve recorded configurations clearing the 60 FPS threshold. At 3840x2160, the Ultra preset averages 99 FPS, which is 39 FPS above the playable threshold. High averages 104 FPS, Medium 167 FPS, and Low 209 FPS. All four presets at 4K are playable.
At 2560x1440, Ultra averages 158 FPS, High 166 FPS, Medium 264 FPS, and Low 286 FPS. Every preset clears 60 FPS with at least 98 FPS of headroom. At 1920x1080, Ultra averages 220 FPS, High 231 FPS, Medium 294 FPS, and Low 319 FPS. The lowest recorded average across the entire test matrix is 99 FPS, which is still well above the 60 FPS target.
The verdict data confirms that all three resolutions have all four settings marked as playable. The best settings per resolution are Ultra at every level, with averages of 99 FPS at 4K, 158 FPS at 1440p, and 220 FPS at 1080p. There is no scenario in this game where this hardware drops below 60 FPS, even at the most demanding preset and highest resolution.
For a game like Inside, which is a side-scrolling puzzle platformer with relatively simple geometry and lighting, this hardware is overkill. The RTX 4090 alone has 24 GB of GDDR6X memory and 16384 shading units, while the CPU contributes 16 cores and a boost clock of 5.00 GHz. The result is that players can max out every setting and still have frame rate headroom for recording, streaming, or running background tasks.
Similar Performance Alternatives
Looking at the CPU's nearest rivals in the database, the Intel Core Ultra 5 338H scores 33989, which is 0.3% below the Core Ultra 7 165H's average benchmark score of 34083. The AMD EPYC 4244P scores 34220, which is 0.4% higher. The AMD Ryzen AI 7 350 scores 34222, also 0.4% higher. The AMD Ryzen 7 3700X scores 34260, which is 0.5% higher. All four alternatives are within a half-percent of the Core Ultra 7 165H, meaning they would deliver nearly identical CPU-bound performance in Inside.
On the GPU side, the nearest rivals to the RTX 4090 are all workstation-class cards. The Intel Arc Pro A60 scores 60326, which is 0% different from the RTX 4090's average benchmark score of 60347. The AMD Radeon Pro Vega 48 scores 60140, 0.3% lower. The AMD Radeon Pro W6600M scores 61896, which is 2.5% higher. The AMD Radeon PRO V710 scores 58657, which is 2.9% lower. These delta values are small, so any of these GPUs would produce similar frame rates in Inside, though the workstation drivers may not be optimized for gaming.
For a practical build, swapping the Core Ultra 7 165H for a Ryzen 7 3700X would not change the gaming experience in Inside, since the CPU is not the bottleneck at any resolution. Similarly, replacing the RTX 4090 with an Intel Arc Pro A60 would yield nearly identical results, given the 0% delta in average benchmark scores. The AMD Radeon Pro W6600M would be slightly faster on paper, but the 2.5% difference is unlikely to move the measured FPS beyond the existing margins.
It is worth remembering the nearest rivals for the GPU are not consumer gaming cards, so their driver behavior and feature support may differ. The RTX 4090's successor, the GeForce 50 series, and its predecessor, the GeForce 30 series, are not listed in the rival data, so direct comparison to those generations is not possible from this dataset.
How This Combo Ranks
The combination of Intel Core Ultra 7 165H and NVIDIA GeForce RTX 4090 ranks 896 out of 3716 tested combos for Inside. That places it in the top 24% of all tested configurations. The rank reflects the overall performance of the pair, not just the GPU or CPU individually.
Given that the RTX 4090 sits at the 88th percentile among all GPUs and the Core Ultra 7 165H sits at the 84th percentile among all CPUs, the combo's rank of 896 is consistent with what those percentiles would suggest. The CPU's percentile is slightly lower than the GPU's, but since Inside is GPU-bound at higher resolutions, the GPU's strength carries more weight.
The rank of 896 out of 3716 means there are 2820 combos that perform worse and 895 that perform better. The combos above this one likely use higher-end CPUs paired with the same GPU, or the same CPU paired with a stronger GPU. However, the measured FPS data shows that this combo already exceeds 60 FPS at every preset and resolution, so the practical difference between rank 896 and a higher rank is academic for this game.
The data indicates that this combo is not the absolute top performer, but it is firmly in the upper quartile. For a game with the modest graphical demands of Inside, the rank is more than sufficient. The bottleneck is never the hardware, and the recorded frame rates at Ultra settings across all resolutions demonstrate that this pairing has no trouble delivering a smooth experience.