Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

60%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
139 FPS
Ultra 1080p Measured
66 FPS

1440p (2K / QHD)

Low 1440p Measured
100 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
63 FPS
Ultra 4K Measured
30 FPS
14.5ms Frame Time
22ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 32,697
Graphics Card
Required 27,118
Your GPU 9,210

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 31 50 63
1440p QHD 47 50 80 100
1080p Full HD 66 69 111 139

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 69
1920x1080 Low 139
1920x1080 Medium 111
1920x1080 Ultra 66
2560x1440 High 50
2560x1440 Low 100
2560x1440 Medium 80
2560x1440 Ultra 47
3840x2160 High 31
3840x2160 Low 63
3840x2160 Medium 50
3840x2160 Ultra 30

Performance Analysis: Inside on Your System

The Intel Core Ultra 7 155H paired with the AMD Radeon 890M is a capable combination for Inside, but its performance ceiling is firmly tied to the integrated GPU. At 4K, the system struggles to maintain smooth gameplay except at the lowest settings, while 1440p and 1080p offer progressively better experiences. Benchmark data indicates this combo ranks in the bottom 7% of tested configurations for this game, making it a viable but not high-end option for this puzzle platformer.

Similar Performance Alternatives

The CPU and GPU in this system each have close performance neighbors according to aggregate benchmark scores. For the Intel Core Ultra 7 155H, the nearest rival is the Intel Core i5-14600T, which posts a nearly identical average score (32707 vs 32697, a 0% delta). The AMD Ryzen AI 7 PRO 360 is essentially tied as well, with an average score of 32662 (0.1% slower). The AMD Ryzen 5 7400F scores 32750 (-0.2% delta), and the AMD Ryzen 7 PRO 6850H reaches 32812 (-0.4% delta). In practical terms, any of these CPUs would deliver indistinguishable frame pacing in Inside, since the game's demands are far below what any of these processors can supply.

On the GPU side, the AMD Radeon 890M sits at the 45th percentile of all GPUs. Its nearest rival is the AMD Radeon Vega 8, which scores 9221 on average versus 9210 for the 890M — a negligible 0.1% difference. The NVIDIA GeForce GTX 960 is 0.7% faster (9273), the NVIDIA GeForce GTX 465 is 0.9% faster (9294), and the NVIDIA GeForce GTX 850M is 1% faster (9302). This clustering means that swapping the 890M for any of these older discrete or integrated solutions would yield nearly identical performance in Inside. The data suggests that users coming from a system with a GTX 960 or GTX 850M would see no meaningful uplift from this integrated Radeon part. Conversely, the 890M is not in the same league as modern discrete GPUs, which is reflected in its mediocre percentile ranking.

CPU and GPU Roles

For Inside, the GPU is the dominant performance constraint at every resolution. The measured frame rates scale dramatically with resolution and settings, while the CPU remains largely idle. At 1920x1080 with Low settings, the system achieves 139 FPS average. Dropping the resolution to 2560x1440 at Low reduces the average to 100 FPS — a 28% decrease. Moving to 3840x2160 at Low yields 63 FPS, which is 55% below the 1080p Low result. This linear decline with pixel count is classic GPU-bound behavior.

The settings scaling further confirms the GPU bottleneck. At 1080p, the average frame rate drops from 139 FPS at Low to 111 FPS at Medium, then to 69 FPS at High, and finally to 66 FPS at Ultra. That is a 53% performance loss from Low to Ultra at the same resolution. At 1440p, the same progression goes from 100 FPS (Low) to 80 FPS (Medium) to 50 FPS (High) to 47 FPS (Ultra) — a 53% drop again. At 4K, the numbers are 63 FPS (Low), 50 FPS (Medium), 31 FPS (High), and 30 FPS (Ultra), representing a 52% reduction.

The CPU's 16 cores and 22 threads, with a Cinebench R23 multi-core score of 15028, are far more than Inside requires. Even the single-core performance (1743 in Cinebench R23) is more than sufficient for a puzzle platformer's logic and physics. The data shows no scenario where the CPU limits frame rates; the variance between resolutions and presets is entirely attributable to the integrated GPU's fill rate and shading capacity. The 890M's 1024 shading units and 32 ROPs, running at a boost clock of 2900 MHz, are the limiting factors at higher settings. In summary, the GPU dictates performance at all three resolutions, and the CPU is never the bottleneck.

Measured FPS Breakdown

The measured FPS data provides a complete picture of how this combo performs across resolutions and presets. All figures are average FPS unless otherwise noted; min and max values are only available for Medium settings.

At 3840x2160 (4K):

  • High: 31 FPS average. This is below the 60 FPS playability threshold and not recommended for smooth gameplay.
  • Low: 63 FPS average. This is the only 4K preset that clears 60 FPS, and it does so by a narrow 3 FPS margin.
  • Medium: 50 FPS average, with a minimum of 43 FPS and a maximum of 58 FPS. The min FPS dipping into the 40s indicates noticeable stutter during complex scenes.
  • Ultra: 30 FPS average. This is essentially a slideshow for a puzzle platformer where precise timing matters.

At 2560x1440 (1440p):

  • High: 50 FPS average. This falls short of the 60 FPS target and would require a settings reduction for smooth play.
  • Low: 100 FPS average. This is comfortably above the threshold and represents the best performance at this resolution.
  • Medium: 80 FPS average, with a minimum of 68 FPS and a maximum of 92 FPS. The minimum stays above 60 FPS, making this the highest preset that remains fully playable.
  • Ultra: 47 FPS average. This is below the threshold and shows the cost of maxing out settings at 1440p.

At 1920x1080 (1080p):

  • High: 69 FPS average. This exceeds 60 FPS but leaves little headroom for demanding scenes.
  • Low: 139 FPS average. This is the highest FPS recorded in the entire dataset, providing a very smooth experience.
  • Medium: 111 FPS average, with a minimum of 94 FPS and a maximum of 127 FPS. The min FPS remains well above the threshold.
  • Ultra: 66 FPS average. This is the most demanding preset that still maintains an average above 60 FPS, though the margin is slim.

The pattern is clear: the 890M delivers roughly twice the FPS at 1080p compared to 4K at the same settings. The Medium preset at 1080p (111 FPS) is more than double the 4K Medium result (50 FPS). This indicates that players targeting 4K must accept Low settings, while 1080p users can potentially run Ultra with acceptable results.

How This Combo Ranks

In the context of all tested hardware combinations for Inside, this CPU-GPU pairing ranks 3486 out of 3716 combos. This places it in the 6th percentile of all configurations, meaning roughly 94% of tested systems perform better. The rank is primarily dragged down by the integrated GPU; the CPU's 83rd percentile ranking among all CPUs is not enough to compensate.

The data indicates that this combo is positioned near the bottom of the performance spectrum for Inside. For comparison, the GPU's nearest rivals — the Vega 8, GTX 960, GTX 465, and GTX 850M — all sit in a similar performance band, and their respective combos would likely rank similarly. The 890M's 45th percentile GPU ranking underscores that it is a mid-to-low tier part for gaming, even in an undemanding title like Inside. The 3486th rank out of 3716 combos means that most desktop systems with even modest discrete GPUs would outperform this setup. However, it is not the absolute worst; the 230 combos below it represent weaker integrated graphics or older mobile parts.

For a puzzle platformer, the practical impact of this rank is that the system can play the game, but only with settings compromises at higher resolutions. The 6th percentile ranking is a blunt indicator that this is not a hardware combo built for high-refresh or high-resolution gaming, even for a game with modest graphical demands.

FAQ

*Q: Can this system run Inside at 4K with smooth frame rates?*

A: Only at Low settings, which produces an average of 63 FPS. Medium settings drop to 50 FPS average with a 43 FPS minimum, and High and Ultra are below 32 FPS.

Q: What is the best settings preset for 1440p gameplay?

A: Medium settings at 2560x1440 deliver an 80 FPS average with a 68 FPS minimum. This is the highest preset that keeps the minimum above the 60 FPS playability threshold. Low settings yield 100 FPS average, but Medium provides better visual quality while remaining fully playable.

Q: Is the CPU or GPU more important for this game at 1080p?

A: The GPU is the limiting factor. At 1920x1080, frame rates range from 66 FPS at Ultra to 139 FPS at Low, showing a 53% performance swing based purely on GPU load. The CPU's Cinebench R23 multi-core score of 15028 is far beyond what Inside requires.

Q: How does the Radeon 890M compare to its closest GPU rivals?

A: The 890M's average benchmark score is 9210, which is 0.1% slower than the AMD Radeon Vega 8 (9221), 0.7% slower than the NVIDIA GeForce GTX 960 (9273), 0.9% slower than the GTX 465 (9294), and 1% slower than the GTX 850M (9302). Performance differences are negligible in practice.

Q: What is the 4K performance difference between Low and Medium settings?

A: At 3840x2160, Low settings average 63 FPS, while Medium averages 50 FPS with a 43 FPS minimum and 58 FPS maximum. The 13 FPS drop between presets is significant enough to push the game below the 60 FPS threshold.

*Q: Does the combo rank well among all tested systems for Inside?*

A: No. It ranks 3486 out of 3716 combos, placing it in the bottom 7% of all configurations. This is due to the integrated GPU's modest performance, despite the CPU ranking in the 83rd percentile among all CPUs.

Best Settings per Resolution

The most demanding preset that maintains an average of at least 60 FPS varies by resolution. At 3840x2160, the only playable setting is Low, which yields an average of 63 FPS. This is the maximum quality option at 4K that stays above the playability threshold, albeit with no margin for demanding scenes.

At 2560x1440, the best playable setting is Medium, producing an 80 FPS average with a 68 FPS minimum. This provides a comfortable buffer above 60 FPS while offering substantially better visual fidelity than Low settings. The High preset at 1440p drops to 50 FPS, which is not playable.

At 1920x1080, the best playable setting is Ultra, which averages 66 FPS. While this clears the 60 FPS threshold, the margin is only 6 FPS, so users may experience occasional drops below 60 FPS in complex scenes. The Medium preset at 1080p is a safer choice for guaranteed smoothness, with a 111 FPS average and a 94 FPS minimum. However, for users prioritizing visual quality, Ultra at 1080p is the highest setting that remains technically playable according to the data.