Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
408 FPS
Ultra 1080p Measured
263 FPS

1440p (2K / QHD)

Low 1440p Measured
366 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
250 FPS
Ultra 4K Measured
119 FPS
3.6ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 69,355
Graphics Card
Required 27,118
Your GPU 49,957

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 119 125 200 250
1440p QHD 189 199 318 366
1080p Full HD 263 277 377 408

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 277
1920x1080 Low 408
1920x1080 Medium 377
1920x1080 Ultra 263
2560x1440 High 199
2560x1440 Low 366
2560x1440 Medium 318
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 250
3840x2160 Medium 200
3840x2160 Ultra 119

Performance Analysis: Inside on Your System

Inside runs with overwhelming headroom on the Intel Core i7-14700K and NVIDIA GeForce RTX 5070 Ti combination. At every tested resolution, even the Ultra preset averages more than double the 60 FPS playability threshold. The weakest recorded average is 119 FPS at 4K Ultra, which remains 98% above the target. This is a system that does not merely play the game—it saturates high-refresh displays at 1440p and approaches 240 Hz territory at 1080p.

The measured FPS data confirms that the bottleneck is almost never the hardware, but rather the game’s own frame pacing or engine limits. Across all resolutions, the gap between Low and Ultra presets is modest in absolute terms: 4K drops from 250 FPS to 119 FPS, 1440p from 366 FPS to 189 FPS, and 1080p from 408 FPS to 263 FPS. These deltas indicate that Inside’s rendering load scales predictably with settings, yet the RTX 5070 Ti’s 43.94 TFLOPS FP32 throughput and 896.0 GB/s memory bandwidth absorb the extra work without any setting dropping below the playable threshold.

Measured FPS Breakdown

At 1920x1080, the RTX 5070 Ti produces frame rates that exceed the refresh rate of virtually all mainstream monitors. The Low preset averages 408 FPS, which is the highest recorded number in the entire dataset. Medium drops to 377 FPS, with a minimum of 320 FPS and a maximum of 433 FPS. High sits at 277 FPS average, while Ultra still delivers 263 FPS. The spread from Low to Ultra is 145 FPS, meaning even the most demanding preset at 1080p runs at more than four times the 60 FPS threshold. The minimum FPS for Medium (320) is still higher than the average FPS of any 4K preset except Low, which shows how far the GPU is from being taxed at this resolution.

Moving to 2560x1440, the performance remains exceptional but begins to show the expected scaling. Low averages 366 FPS, Medium 318 FPS (min 271, max 366), High 199 FPS, and Ultra 189 FPS. The drop from Low to Medium is just 48 FPS, but the jump from Medium to High costs 119 FPS. This suggests that High and Ultra presets introduce effects that are disproportionately heavier than the step from Low to Medium. Even at 1440p Ultra, the average of 189 FPS leaves enough headroom for a 144 Hz monitor to run at full refresh with no V-sync tearing, and a 240 Hz panel would still receive a playable, if not fully saturated, frame stream.

At 3840x2160, the RTX 5070 Ti finally encounters a workload that reduces its output below 200 FPS. The Low preset averages 250 FPS, Medium 200 FPS (min 170, max 230), High 125 FPS, and Ultra 119 FPS. The Medium preset’s minimum of 170 FPS is notable because it is the only recorded minimum in the entire dataset that is still above 150 FPS, indicating consistent frame delivery even under load. High and Ultra are close together—only 6 FPS apart—which suggests that the Ultra preset’s additional effects are relatively cheap at this resolution, or that the GPU is hitting a memory bandwidth or shading unit limit that both presets share. The 4K Ultra average of 119 FPS is still comfortably above 60 FPS, and the lack of a recorded minimum for that preset implies that the frame time variance is low enough to be considered stable.

The pattern across all three resolutions is that the RTX 5070 Ti never drops below 119 FPS average, and the only recorded minimums (170 FPS at 4K Medium, 271 FPS at 1440p Medium, 320 FPS at 1080p Medium) are all high enough to eliminate any concern about stutter or hitches. The absence of min/max data for most presets likely reflects that the benchmark tool only captured frametimes for the Medium preset, but the consistency implied by the available data suggests that Inside is not a demanding title for this hardware.

FAQ

Q: Can this PC run Inside at 4K Ultra?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 119 FPS, which is 59 FPS above the 60 FPS playable threshold. The verdictByResolution data lists Ultra as the best settings at 4K, with an average of 119 FPS.

Q: What is the highest FPS this combo achieves in Inside?

A: The highest recorded average is 408 FPS at 1920x1080 with Low settings. The maximum FPS ever recorded is 433 FPS, which occurs at 1080p Medium.

Q: How does the RTX 5070 Ti compare to the RX 6900 XT in this context?

A: The GPU nearestRivals data shows the AMD Radeon RX 6900 XT has an average score of 50951, which is 2% higher than the RTX 5070 Ti’s 49957. However, the RTX 5070 Ti still delivers the FPS figures above, so any rival’s slight benchmark advantage does not translate into a playability difference for Inside.

Q: Is the i7-14700K a bottleneck for the RTX 5070 Ti in this game?

A: The data does not indicate a CPU bottleneck. The CPU’s cinebench_r23_multicore score is 33440.5, and its passmark_multithread score is 52392, placing it in the 94th percentile of all CPUs. Since the FPS at 1080p Low (408) is far above any display refresh rate, the CPU delivers frames faster than the GPU can render them, but the FPS scaling with resolution suggests the GPU is the primary limiter.

Q: What is the difference between High and Ultra at 1440p?

A: At 2560x1440, High averages 199 FPS and Ultra averages 189 FPS, a difference of 10 FPS. The data shows that both presets are playable, but Ultra offers a marginal visual improvement at a negligible performance cost.

Q: Does the RTX 5070 Ti ever drop below 60 FPS in Inside?

A: No. Every recorded average FPS across all resolutions and presets is above 119 FPS, and the lowest recorded minimum is 170 FPS at 4K Medium. The playableThresholdFps is 60, and this combo exceeds it in every scenario.

How This Combo Ranks

The Intel Core i7-14700K and NVIDIA GeForce RTX 5070 Ti combination ranks 212 out of 3716 tested combos for Inside. This places it in the top 5.7% of all systems in the database, which is consistent with the hardware’s individual percentiles: the CPU is in the 94th percentile of all CPUs, and the GPU is in the 86th percentile of all GPUs. The combo rank is lower than the CPU percentile but higher than the GPU percentile, suggesting that Inside is more dependent on GPU performance than CPU performance, yet the i7-14700K’s high single-thread score (2160 in cinebench_r23_singlecore) still contributes to the overall ranking.

The rank of 212 means that 211 other combinations produce higher average FPS in this game. Given that the RTX 5070 Ti’s nearestRivals include the RX 6900 XT (which scores 2% higher) and the RX 6800 XT (which scores 3.1% lower), the spread of combos above rank 212 likely includes systems with faster GPUs such as the RTX 5090 or RX 7900 XTX, but the fact that this combo still clears 119 FPS at 4K Ultra indicates that the rank is a measure of raw FPS, not playability. For context, the GPU’s passmark_g3d score of 32974 is far above the passmark_directx_12 score of 127, which suggests that synthetic DirectX 12 tests may not reflect real-world Inside performance.

The combo rank also benefits from the CPU’s 20 cores and 28 threads, which, while not directly utilized by a puzzle platformer, contribute to the passmark_multithread score of 52392. The data shows that the i7-14700K’s nearestRivals are all AMD parts—the EPYC 9115 (0.1% faster), Ryzen 9 7950X (0.2% slower), Ryzen 9 7940HX (0.7% slower), and Ryzen 7 9700F (0.9% slower)—so any of these CPUs paired with the RTX 5070 Ti would produce nearly identical FPS in Inside. The rank of 212 out of 3716 is a strong result, but it is not a top-100 placement because the GPU’s 86th percentile is the limiting factor, not the CPU.

Similar Performance Alternatives

For the CPU, the Intel Core i7-14700K’s nearestRivals show that the AMD EPYC 9115 has an average benchmark score of 69288, which is 0.1% higher than the i7-14700K’s 69355. The AMD Ryzen 9 7950X scores 69515 (0.2% higher), the AMD Ryzen 9 7940HX scores 69875 (0.7% higher), and the AMD Ryzen 7 9700F scores 69996 (0.9% higher). All four alternatives would deliver virtually identical FPS in Inside, since the game is not CPU-bound. The i7-14700K’s cache layout—80 KB L1 per core, 2 MB L2 per core, and 33 MB shared L3—is more than sufficient for a game with limited entity counts and physics, so any of these CPUs would behave the same.

On the GPU side, the NVIDIA GeForce RTX 5070 Ti’s nearestRivals include the AMD Radeon RX Vega 64 with an average score of 50001 (0.1% higher), the Intel Arc A550M with 49737 (0.4% lower), the AMD Radeon RX 6900 XT with 50951 (2% higher), and the AMD Radeon RX 6800 XT with 48477 (3.1% lower). For Inside, the RX 6900 XT would produce approximately 2% higher FPS than the RTX 5070 Ti, meaning at 4K Ultra it might average around 121 FPS instead of 119. The RX 6800 XT would be about 3% slower, dropping the 4K Ultra average to roughly 115 FPS—still well above 60. The RX Vega 64, despite being an older architecture, is nearly identical in benchmark score, so it would match the RTX 5070 Ti’s performance within 1 FPS. The Intel Arc A550M is 0.4% slower, which would be imperceptible.

None of these alternatives would change the verdict: every one of these GPUs, when paired with any of the CPUs listed, would run Inside at Ultra settings across all resolutions with average FPS above 115. The data suggests that the i7-14700K and RTX 5070 Ti are not uniquely positioned—they are part of a cluster of hardware that all exceed the game’s requirements by a wide margin.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 263 FPS. The measured data confirms that Low (408 FPS), Medium (377 FPS), and High (277 FPS) all also exceed 60 FPS, but Ultra is the highest quality option and still runs at 263 FPS, which is 203 FPS above the threshold. The verdictByResolution field lists Ultra as the best settings, with an average FPS of 263.

At 2560x1440, the best settings are also Ultra, with an average of 189 FPS. The gap between High (199 FPS) and Ultra (189 FPS) is only 10 FPS, so there is no reason to sacrifice visual quality. The 189 FPS average is 129 FPS above the 60 FPS threshold.

At 3840x2160, the best settings remain Ultra, with an average of 119 FPS. This is the most demanding scenario in the dataset, but the average still exceeds 60 FPS by 59 FPS. The verdictByResolution data explicitly lists Ultra as the best settings at 4K, with an average of 119 FPS. Since the playableThresholdFps is 60, and 119 is nearly double that, there is no need to drop to High (125 FPS) or Medium (200 FPS) for playability—Ultra is the optimal choice.

Across all resolutions, the RTX 5070 Ti has enough headroom that the most demanding preset is always the best choice. The only consideration is if a user has a monitor with a refresh rate above 119 FPS at 4K, in which case dropping to Medium (200 FPS) would be necessary to fully saturate a 144 Hz display. However, for standard 60 Hz or 120 Hz displays, Ultra is the clear recommendation.

The Verdict

This PC can run Inside at every resolution and preset combination in the dataset, and it does so with massive headroom. The verdictByResolution data lists all four settings (Low, Medium, High, Ultra) as playable at each resolution—3840x2160, 2560x1440, and 1920x1080. The best settings are Ultra everywhere, with average FPS of 119 at 4K, 189 at 1440p, and 263 at 1080p. The 60 FPS threshold is cleared by at least 59 FPS at 4K Ultra, 129 FPS at 1440p Ultra, and 203 FPS at 1080p Ultra.

The measured FPS data shows that the RTX 5070 Ti’s 16 GB of GDDR7 memory and 896.0 GB/s bandwidth are more than adequate for Inside’s visual style, which relies on atmospheric lighting and subtle shadows rather than heavy texture detail. The i7-14700K’s 28 threads and 5.60 GHz boost clock ensure that any CPU-side logic, such as physics for the boy character or environmental interactions, never becomes a bottleneck. The combo’s rank of 212 out of 3716 confirms that it is a high-end system, but the actual gameplay experience is even better than the rank suggests because Inside is not a demanding title by 2025 standards.

For users with a 4K 120 Hz display, the 119 FPS average at Ultra means the game will run at the display’s maximum refresh rate with V-sync enabled. For 1440p 240 Hz displays, the 189 FPS average at Ultra leaves 51 FPS of headroom, so a user could either enable V-sync to lock at 144 Hz or leave it uncapped for a smoother experience. At 1080p, the 263 FPS average exceeds the refresh rate of even the fastest 360 Hz monitors, so the GPU is effectively never the limiting factor. In short, this is a system that runs Inside flawlessly at maximum settings, and the only way to make it struggle would be to run the game at a resolution or refresh rate that does not exist in the dataset.