Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

67%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
231 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
166 FPS
Ultra 1440p Measured
79 FPS

4K (Ultra HD)

Low 4K Measured
104 FPS
Ultra 4K Measured
50 FPS
8.7ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 69,355
Graphics Card
Required 27,118
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 50 52 83 104
1440p QHD 79 83 133 166
1080p Full HD 110 115 184 231

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 115
1920x1080 Low 231
1920x1080 Medium 184
1920x1080 Ultra 110
2560x1440 High 83
2560x1440 Low 166
2560x1440 Medium 133
2560x1440 Ultra 79
3840x2160 High 52
3840x2160 Low 104
3840x2160 Medium 83
3840x2160 Ultra 50

Performance Analysis: Inside on Your System

FAQ

Q: What is the average FPS at 1920x1080 with Ultra settings?

A: The recorded average is 110 FPS, which clears the 60 FPS playable threshold by a wide margin.

Q: Is 3840x2160 playable with this combo?

A: Yes, but only at Low and Medium settings. Low averages 104 FPS, Medium averages 83 FPS. High and Ultra fall below 60 FPS.

Q: How does the GTX 1070 rank among all GPUs in the database?

A: The GPU sits at the 47th percentile, with an average benchmark score of 9780. Its closest rivals are the AMD FirePro W5000 and NVIDIA Quadro M2000M.

Q: What is the best preset for 2560x1440?

A: Ultra is the best playable preset, averaging 79 FPS. All four presets (Low, Medium, High, Ultra) stay above 60 FPS at this resolution.

Q: Does the CPU or GPU limit performance at higher resolutions?

A: The data shows GPU scaling dominates. At 1080p Low the combo hits 231 FPS, but at 4K Ultra it drops to 50 FPS, indicating the GPU becomes the primary constraint as resolution increases.

Q: What is the combo's rank among all tested combinations?

A: It ranks 3056 out of 3716 tested combos for this game, placing it in the lower portion of the database.

CPU and GPU Roles

Inside is a puzzle platformer with modest rendering demands, but the recorded FPS data reveals how the GTX 1070 becomes the limiting factor as resolution climbs. At 1920x1080 Low, the combo produces 231 FPS. At 2560x1440 Low, that falls to 166 FPS. At 3840x2160 Low, it drops further to 104 FPS. This pattern is consistent with a GPU-bound scenario: the CPU, an Intel Core i7-14700K with 20 cores and 28 threads, is far beyond what this game needs, while the GTX 1070's Pascal architecture from the 16 nm process node carries the rendering load.

The same scaling appears across presets. At 1080p Medium, the average is 184 FPS. At 1440p Medium, it is 133 FPS. At 4K Medium, it is 83 FPS. The step from 1080p to 1440p costs roughly 28% of the average FPS, and the step from 1440p to 4K costs roughly 38% more. These are large proportional losses that point squarely at the GPU's fill rate and memory bandwidth. The GTX 1070 has 8 GB of GDDR5 on a 256 bit bus, with bandwidth of 256.3 GB/s. At higher resolutions, the pixel workload grows faster than the CPU's ability to feed frames, so the GPU saturates first.

The CPU's benchmark profile shows why it is not the bottleneck. The i7-14700K scores 33440.5 in Cinebench R23 multi-core and 2160 in single-core, with a PassMark multithread score of 52392. Its percentile versus all CPUs is 94. For a game like Inside, which does not rely on heavy physics or AI simulation, the CPU has ample headroom. Even at 4K Ultra, where the combo drops to 50 FPS, the constraint is the GPU's shading throughput, not the processor's instruction rate.

The measured data also shows that Ultra presets compress the FPS gap between resolutions less than Low presets do. At 1080p Ultra the average is 110 FPS, at 1440p Ultra it is 79 FPS, and at 4K Ultra it is 50 FPS. The percentage drops are similar to Low, but the absolute values sit closer to the 60 FPS threshold. This means the GPU's raw compute limits the highest quality settings at 4K, while the CPU remains idle enough to allow 110 FPS at 1080p Ultra. For players targeting 4K, the GTX 1070's 6.463 TFLOPS FP32 throughput and 202.0 GTexel/s texture rate are the deciding factors.

How This Combo Ranks

The database ranks this specific CPU and GPU pairing at 3056 out of 3716 tested combos for Inside. That places it in the 82nd percentile of combinations, meaning roughly 82% of tested pairings deliver higher performance in this title. The rank is low for a CPU that sits at the 94th percentile among all processors, which reinforces the idea that the GPU drags the overall result down.

The GTX 1070's average benchmark score is 9780, and its percentile versus all GPUs is 47. That places it near the middle of the GPU distribution, but for a 2016-era card, the competition in the database includes many newer and faster options. The i7-14700K, by contrast, has an average benchmark score of 69355 and a 94th percentile ranking. The mismatch between a top-tier CPU and a mid-tier GPU creates a combo that excels in CPU-light scenarios but struggles when GPU demand rises.

In the context of Inside specifically, the game's simple geometry and 2D-style presentation mean the GPU does not need to be exceptionally powerful at 1080p. The combo still ranks low overall because the database includes many pairings with both strong CPUs and strong GPUs. The rank of 3056 out of 3716 indicates that most tested systems outperform this one, but the FPS data shows that the actual gameplay experience remains smooth at most settings below 4K Ultra.

Similar Performance Alternatives

Looking at the GPU's nearest rivals in the database, the AMD FirePro W5000 has an average score of 9803, which is 0.2% higher than the GTX 1070. The NVIDIA Quadro M2000M scores 9832, 0.5% higher. The NVIDIA Tesla M10 scores 9724, 0.6% lower. The NVIDIA Tesla C2070 scores 9716, 0.7% lower. These deltas are all within 1%, meaning a system using any of these GPUs would produce nearly identical frame rates in Inside at the same settings and resolution. The practical difference between the GTX 1070 and these alternatives is negligible for this game.

On the CPU side, the i7-14700K's nearest rivals are all within 1% of its average score. The AMD EPYC 9115 scores 69288, just 0.1% lower. The AMD Ryzen 9 7950X scores 69515, 0.2% higher. The AMD Ryzen 9 7940HX scores 69875, 0.7% higher. The AMD Ryzen 7 9700F scores 69996, 0.9% higher. For Inside, swapping to any of these CPUs would not meaningfully change the FPS at any resolution, because the game is not CPU-bound with any of them.

For a buyer looking at similar performance, the key takeaway is that the GPU defines the experience. A system with an AMD Ryzen 9 7950X and a GTX 1070 would behave almost identically to this combo in Inside, as would a system with an AMD EPYC 9115. The CPU's exact model matters little once it clears the game's modest requirements. The GPU's nearest rivals, all professional or mobile parts, show that the GTX 1070 sits at a performance level that many newer entry-level cards have surpassed, but within the database's measured results, the differences are tiny.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 231 FPS. Medium settings average 184 FPS, with a minimum of 157 FPS and a maximum of 212 FPS. High settings average 115 FPS. Ultra settings average 110 FPS. Every preset at 1080p clears the 60 FPS threshold comfortably, and even the minimum recorded FPS at Medium (157 FPS) is more than double the playable threshold.

At 2560x1440, the averages step down. Low settings average 166 FPS. Medium settings average 133 FPS, with a minimum of 113 FPS and a maximum of 153 FPS. High settings average 83 FPS. Ultra settings average 79 FPS. All four presets remain above 60 FPS, but the margin shrinks considerably at High and Ultra. The minimum at Medium, 113 FPS, still leaves substantial headroom.

At 3840x2160, the picture changes. Low settings average 104 FPS. Medium settings average 83 FPS, with a minimum of 71 FPS and a maximum of 96 FPS. High settings average 52 FPS, which falls below the 60 FPS threshold. Ultra settings average 50 FPS, also below the threshold. The minimum at Medium, 71 FPS, is the lowest recorded minimum that still clears 60 FPS. High and Ultra do not provide min or max values in the measured data, but their averages indicate they are not reliably playable.

The pattern across all three resolutions is consistent: Low and Medium presets offer the best headroom, while High and Ultra push the GTX 1070 closer to its limits. At 4K, only Low and Medium are viable. At 1440p and 1080p, all presets are viable, with the GPU's performance scaling predictably with resolution.

The Verdict

This PC can run Inside, and it can do so at 60 FPS or higher across most tested configurations. The verdict by resolution is clear. At 1920x1080, all four presets are playable, with Ultra averaging 110 FPS. At 2560x1440, all four presets are also playable, with Ultra averaging 79 FPS. At 3840x2160, only Low and Medium are playable, with Medium averaging 83 FPS. High and Ultra at 4K fall to 52 FPS and 50 FPS respectively, both below the 60 FPS threshold.

The GTX 1070, despite its age and its 47th percentile ranking among all GPUs, is sufficient for Inside at 1080p and 1440p. The i7-14700K provides more than enough CPU performance, as evidenced by its 94th percentile ranking and strong multi-core scores. For a puzzle platformer with limited graphical complexity, this combo delivers a smooth experience at most settings.

The only configuration where the system fails to hit 60 FPS is 4K with High or Ultra settings. Players targeting 4K should use Medium settings, which average 83 FPS, or Low settings, which average 104 FPS. The measured minimum at 4K Medium is 71 FPS, so even the slowest frames stay above the playable threshold.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 83 FPS. Low is also playable at 104 FPS, but Medium offers better visual quality while maintaining a comfortable margin above the threshold. High and Ultra are not recommended at this resolution, as their averages of 52 FPS and 50 FPS fall short of 60 FPS.

At 2560x1440, the best preset is Ultra, averaging 79 FPS. All lower presets are also playable, but Ultra provides the highest visual quality while still clearing 60 FPS. The margin is smaller than at 1080p, but the average stays well above the threshold.

At 1920x1080, the best preset is Ultra, averaging 110 FPS. This gives the greatest visual fidelity with a substantial FPS buffer. The minimum at Medium is 157 FPS, and while Ultra does not have a recorded minimum, the average of 110 FPS indicates consistent performance well above the playable threshold.

For players who prioritize frame rate stability over visual quality, Low settings at any resolution provide the highest averages, with 231 FPS at 1080p, 166 FPS at 1440p, and 104 FPS at 4K. But for the best balance of visuals and performance, Medium at 4K and Ultra at 1440p and 1080p are the recommended choices based on the measured data.