Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
396 FPS
Ultra 1080p Measured
219 FPS

1440p (2K / QHD)

Low 1440p Measured
329 FPS
Ultra 1440p Measured
158 FPS

4K (Ultra HD)

Low 4K Measured
204 FPS
Ultra 4K Measured
99 FPS
4.4ms Frame Time
7ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 46,881
Graphics Card
Required 27,118
Your GPU 13,543

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 99 106 163 204
1440p QHD 158 166 262 329
1080p Full HD 219 229 368 396

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 229
1920x1080 Low 396
1920x1080 Medium 368
1920x1080 Ultra 219
2560x1440 High 166
2560x1440 Low 329
2560x1440 Medium 262
2560x1440 Ultra 158
3840x2160 High 106
3840x2160 Low 204
3840x2160 Medium 163
3840x2160 Ultra 99

Performance Analysis: Inside on Your System

The Intel Core i7-13700K paired with the AMD Radeon RX 9070 XT delivers exceptional performance in Inside, a puzzle platformer from 2016. Benchmark data shows this combination achieves an average frame rate of 219 FPS at 1920x1080 with Ultra settings, and remains above 99 FPS at 4K with the same preset. The measured results place this combo at rank 621 out of 3,716 tested combinations, putting it in the top 16.7 percent of all configurations. Every tested resolution and preset combination clears the 60 FPS playability threshold, indicating that this hardware pairing is vastly overqualified for the game's demands.

How This Combo Ranks

The combination of the Intel Core i7-13700K and AMD Radeon RX 9070 XT sits at rank 621 among 3,716 tested combos for Inside. This places the pairing in the 83rd percentile of all configurations, meaning roughly 83 percent of tested hardware combinations perform worse in this specific game. The ranking reflects the substantial headroom this system has for a title that launched in 2016, when even flagship hardware of that era targeted 60 FPS rather than the 200-plus FPS figures seen here.

The CPU contributes a 16-core, 24-thread Raptor Lake-S design with a boost clock of 5.40 GHz, while the GPU provides 16 GB of GDDR6 memory across a 256-bit bus. In the context of Inside, which is a side-scrolling puzzle platformer with modest geometric complexity, the combo rank is influenced more by raw clock speed and single-thread performance than by the GPU's 48.66 TFLOPS of FP32 compute. The GPU's 55th percentile ranking among all GPUs in the database, based on an average benchmark score of 13,543, appears low relative to its strong measured performance in this game, but that percentile reflects broader synthetic workloads rather than Inside-specific behavior.

CPU and GPU Roles

The data indicates that the GPU is the primary scaling factor across resolutions, but the CPU's headroom prevents it from becoming a bottleneck at any tested setting. At 1920x1080, the difference between Low and Ultra settings is 177 FPS (396 FPS versus 219 FPS), which shows that the GPU workload increases significantly with graphical fidelity. However, even at Ultra settings and 1080p, the system maintains 219 FPS average, suggesting the CPU can feed the GPU far beyond what Inside requires.

Moving from 1920x1080 to 2560x1440, the Ultra preset drops from 219 FPS to 157.9 FPS, a reduction of 27.9 percent. The High preset falls from 229 FPS to 166.4 FPS, a 27.3 percent decrease. These proportional drops indicate that the GPU is the limiting factor as pixel count rises, since the CPU's workload remains constant across resolutions. At 3840x2160, Ultra averages 99.2 FPS, down 37.2 percent from the 1440p figure, and High averages 106.1 FPS, down 36.2 percent. The consistency of these percentage drops across presets confirms that the RX 9070 XT's memory bandwidth of 644.6 GB/s and 256-bit bus are the decisive factors at higher resolutions.

The CPU's role becomes more apparent when comparing Low presets across resolutions. At 1080p Low, the system hits 396 FPS; at 1440p Low, it reaches 329.4 FPS; and at 4K Low, it maintains 203.7 FPS. The diminishing returns from 1080p to 1440p (a 16.8 percent drop) versus 1440p to 4K (a 38.1 percent drop) suggest that the CPU can saturate the GPU at lower pixel counts, but the GPU's pixel throughput becomes the constraint at 4K. The CPU's 3DMark single-thread score of 1,136 and PassMark single-thread score of 4,333 indicate strong per-core performance that keeps pace with the GPU's output.

Best Settings per Resolution

At 1920x1080, Ultra settings are the best choice, delivering an average of 219 FPS. This exceeds the 60 FPS threshold by 159 FPS, leaving enormous headroom for consistent frame pacing. The High preset at 229 FPS and Medium at 367.8 FPS are also viable, but Ultra provides the highest visual quality without any playability compromise.

At 2560x1440, Ultra remains the optimal preset, averaging 157.9 FPS. This is 97.9 FPS above the playability threshold, and the drop from the 1080p Ultra figure of 219 FPS represents a 27.9 percent reduction. The Medium preset at 262.2 FPS and High at 166.4 FPS are alternatives, but Ultra's frame rate still provides a comfortable margin for any refresh rate up to 144 Hz.

At 3840x2160, Ultra averages 99.2 FPS, which is 39.2 FPS above the 60 FPS threshold. This makes 4K Ultra the most demanding preset that stays above 60 FPS, and it does so with a substantial buffer. High at 106.1 FPS is nearly identical in performance, while Medium at 162.5 FPS and Low at 203.7 FPS offer progressively higher frame rates for users who prioritize smoothness over visual fidelity. Given that Ultra clears 60 FPS by nearly 40 FPS, there is no reason to drop below Ultra at any resolution.

Similar Performance Alternatives

Looking at the CPU's nearest rivals, the AMD Ryzen 9 5900 scores 46,971 on average, which is 0.2 percent lower than the i7-13700K's 46,881 average benchmark score. This positions the Ryzen 9 5900 as a near-identical CPU for Inside, with expected frame rates within a fraction of a percent. The AMD Ryzen AI 9 HX PRO 375 scores 47,022, 0.3 percent higher, while the AMD Ryzen 9 7845HX scores 46,654, 0.5 percent lower. The Intel Xeon w3-2535 also scores 46,653, matching the 7845HX. All four alternatives would produce statistically indistinguishable results in Inside, since the game's CPU demands are modest relative to these processors' capabilities.

For the GPU, the nearest rivals by average benchmark score are surprising given the RX 9070 XT's modern architecture. The AMD Radeon HD 7770M scores 13,536, just 0.1 percent lower than the RX 9070 XT's 13,543 average. The NVIDIA GeForce GTX 570 scores 13,515, 0.2 percent lower, and the NVIDIA P106-090 scores 13,470, 0.5 percent lower. The AMD Radeon Pro 555 scores 13,407, 1 percent lower. These delta percentages reflect the RX 9070 XT's average benchmark score across all tests, not its Inside-specific performance. In practice, the RX 9070 XT's 16 GB of GDDR6 memory and RDNA 4.0 architecture would likely outperform these older GPUs in Inside, but the database's average scores place them in the same tier.

FAQ

*Q: Can this PC run Inside at 4K with maximum settings?*

A: Yes. At 3840x2160 with Ultra settings, the combination averages 99.2 FPS, which is 39.2 FPS above the 60 FPS playability threshold. High settings average 106.1 FPS, and even the most demanding preset leaves significant headroom.

*Q: What is the best resolution for this hardware in Inside?*

A: All three tested resolutions support Ultra settings above 60 FPS. The highest average frame rate is 396 FPS at 1920x1080 with Low settings, but Ultra at 1920x1080 still averages 219 FPS. For maximum visual fidelity, 3840x2160 Ultra at 99.2 FPS is the most demanding viable option.

Q: How does the CPU compare to similar processors for this game?

A: The i7-13700K's average benchmark score of 46,881 is within 0.5 percent of four nearest rivals: the AMD Ryzen 9 5900, AMD Ryzen AI 9 HX PRO 375, AMD Ryzen 9 7845HX, and Intel Xeon w3-2535. Any of these CPUs would deliver effectively identical frame rates in Inside.

Q: Is the GPU a bottleneck at 1080p?

A: The data shows the GPU scales with resolution, but at 1920x1080 the system reaches 396 FPS on Low settings and 219 FPS on Ultra. The CPU's single-thread score of 1,136 in 3DMark suggests it can keep up with the GPU's output at lower resolutions, but the 27.9 percent drop from 1080p to 1440p on Ultra indicates the GPU becomes the limiting factor as resolution increases.

Q: What frame rate can I expect at 1440p with High settings?

A: At 2560x1440 with High settings, the system averages 166.4 FPS. This is 106.4 FPS above the 60 FPS threshold and represents a 27.3 percent reduction from the 1080p High figure of 229 FPS.

Q: Does the Medium preset offer a significant advantage over Ultra?

A: At 1920x1080, Medium averages 367.8 FPS versus Ultra's 219 FPS, a 68 percent increase. At 2560x1440, Medium averages 262.2 FPS versus Ultra's 157.9 FPS, a 66 percent increase. At 3840x2160, Medium averages 162.5 FPS versus Ultra's 99.2 FPS, a 64 percent increase. The advantage is consistent but only matters for refresh rates above 144 Hz at 4K.

The Verdict

This PC can run Inside at every resolution and preset tested, with all twelve combinations exceeding the 60 FPS playability threshold. At 1920x1080, the best settings are Ultra, averaging 219 FPS. At 2560x1440, Ultra averages 157.9 FPS. At 3840x2160, Ultra averages 99.2 FPS. The verdict is unambiguous: the Intel Core i7-13700K and AMD Radeon RX 9070 XT provide far more performance than Inside requires, and users can enable maximum graphical fidelity at any resolution without concern for frame rate drops below 60 FPS.

The lowest measured frame rate across all tests is 99.2 FPS at 4K Ultra, which still leaves a 39.2 FPS margin above the playability threshold. The highest is 396 FPS at 1080p Low. The system's combination of a 5.40 GHz boost clock CPU and a GPU with 48.66 TFLOPS of FP32 compute ensures that Inside's 2016-era rendering demands are met with overwhelming headroom. For users with high refresh rate displays, the 1440p Medium preset at 262.2 FPS or 1080p High at 229 FPS would pair well with 240 Hz monitors.

Measured FPS Breakdown

At 1920x1080, the system averages 396 FPS on Low, 367.8 FPS on Medium, 229 FPS on High, and 219 FPS on Ultra. The spread between Low and Ultra is 177 FPS, with the largest drop occurring between Medium and High (138.8 FPS). The transition from High to Ultra costs only 10 FPS, suggesting that Ultra provides the best visual fidelity-to-performance ratio at this resolution.

At 2560x1440, Low averages 329.4 FPS, Medium averages 262.2 FPS, High averages 166.4 FPS, and Ultra averages 157.9 FPS. The drop from Medium to High is 95.8 FPS, while High to Ultra costs only 8.5 FPS. The pattern mirrors 1080p, with the High-to-Ultra gap being minimal despite the higher pixel count.

At 3840x2160, Low averages 203.7 FPS, Medium averages 162.5 FPS, High averages 106.1 FPS, and Ultra averages 99.2 FPS. The Medium-to-High gap is 56.4 FPS, while High-to-Ultra is 6.9 FPS. Across all resolutions, the incremental cost of Ultra over High is consistently small, ranging from 6.9 to 10 FPS, while the jump from Medium to High is consistently the largest single-step penalty. This indicates that Inside's Ultra preset adds minimal additional GPU load over High, making it the recommended setting for any resolution.