Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

67%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
227 FPS
Ultra 1080p Measured
111 FPS

1440p (2K / QHD)

Low 1440p Measured
164 FPS
Ultra 1440p Measured
76 FPS

4K (Ultra HD)

Low 4K Measured
105 FPS
Ultra 4K Measured
49 FPS
8.6ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 49,394
Graphics Card
Required 27,118
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 49 51 86 105
1440p QHD 76 83 133 164
1080p Full HD 111 116 184 227

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 116
1920x1080 Low 227
1920x1080 Medium 184
1920x1080 Ultra 111
2560x1440 High 83
2560x1440 Low 164
2560x1440 Medium 133
2560x1440 Ultra 76
3840x2160 High 51
3840x2160 Low 105
3840x2160 Medium 86
3840x2160 Ultra 49

Performance Analysis: Inside on Your System

FAQ

Q: What is the measured performance of the Intel Core i5-14600KF and NVIDIA GeForce GTX 1070 combination in Inside?

A: The recorded data shows average frame rates ranging from 48.6 FPS at 4K Ultra settings up to 227.4 FPS at 1080p Low settings. The combo ranks 3095th out of 3716 tested combinations in this game.

Q: Can this system run Inside at 60 FPS on a 4K display?

A: Yes, but not at every preset. The verdict shows playable settings at 4K include Low and Medium presets, with Medium delivering 86.2 FPS average. High and Ultra settings fall below the 60 FPS threshold, at 50.7 FPS and 48.6 FPS respectively.

Q: What is the best playable setting at 1440p for this combination?

A: The database lists all four presets as playable at 2560x1440. The best setting is Ultra, which achieves an average of 76.4 FPS, still comfortably above the 60 FPS playability threshold.

Q: How does the GTX 1070 compare to its nearest rivals in benchmark scores?

A: The GTX 1070 has an average benchmark score of 9780, placing it in the 47th percentile of all GPUs. Its nearest rival, the AMD FirePro W5000, scores 9803, which is only 0.2% higher. The NVIDIA Quadro M2000M is 0.5% higher at 9832, while the NVIDIA Tesla M10 and Tesla C2070 are 0.6% and 0.7% lower respectively.

Q: How does the Core i5-14600KF compare to nearby CPUs in synthetic testing?

A: The Core i5-14600KF has an average benchmark score of 49394, placing it in the 90th percentile of all CPUs. The AMD Ryzen 9 7900 scores 49228 (0.3% lower), the AMD Ryzen 7 PRO 5755G scores 49196 (0.4% lower), and the Intel Core Ultra 5 245 scores 48995 (0.8% lower). The AMD Ryzen AI Max+ 388 is the only nearby rival ahead, at 49796, which is 0.8% higher.

Q: What is the CPU's single-thread performance like?

A: The Core i5-14600KF records a Cinebench R23 single-core score of 4594 and a Geekbench single-core score of 2445. In PassMark single-thread testing, it scores 4273, indicating strong per-core performance that matters for games with light threading.

CPU and GPU Roles

The data for Inside shows a clear pattern: at lower resolutions, the frame rate is far higher, which indicates that the GPU is the principal limiting factor in this pairing. At 1920x1080, the difference between Low and Ultra settings is 116.6 FPS (227.4 versus 110.8), a 105% spread. At 2560x1440, the same preset swing produces a gap of 88 FPS (164.4 versus 76.4), a 115% relative difference. At 3840x2160, the spread narrows to 56.8 FPS (105.4 versus 48.6), a 117% relative difference. The fact that higher resolutions compress the absolute frame rate range while the relative percentage gap stays roughly consistent suggests the GPU is handling most of the rendering load in all configurations.

Resolution scaling reinforces this interpretation. Dropping from 1080p to 1440p at High settings reduces average FPS from 115.5 to 82.5, a 28.6% loss. Moving from 1440p to 4K at High settings drops the average from 82.5 to 50.7, a 38.5% loss. The larger percentage loss at the 4K step indicates that pixel throughput becomes progressively more demanding on the GTX 1070. The CPU, with its 14 cores and 20 threads plus a 5.30 GHz boost clock, is not the bottleneck here; even at 1080p Low, the system reaches 227.4 FPS, which is far beyond what most displays can show, and it is the GPU that governs the scaling curve.

Preset sensitivity also points to GPU dominance. At 4K, the jump from Low to Medium costs 19.2 FPS (105.4 to 86.2), while the jump from Medium to High costs 35.5 FPS (86.2 to 50.7). The steep drop from Medium to High at 4K suggests that High preset features, likely shadow quality and post-processing effects, place a disproportionate load on the Pascal architecture. At 1080p, the same Medium to High transition only costs 68.6 FPS (184.1 to 115.5), which is still a large absolute drop but leaves the system well above the playability threshold. The GTX 1070, with 1920 shading units and 64 ROPs, is the component that determines whether the game stays smooth.

Measured FPS Breakdown

At 1920x1080, the combination delivers its highest frame rates. The Low preset averages 227.4 FPS. Medium drops to 184.1 FPS. High averages 115.5 FPS. Ultra averages 110.8 FPS. Every preset at this resolution clears the 60 FPS playability threshold by a wide margin, and even the heaviest settings leave more than 80% headroom above the minimum acceptable frame rate.

At 2560x1440, performance remains strong across all settings. Low averages 164.4 FPS. Medium averages 133 FPS. High averages 82.5 FPS. Ultra averages 76.4 FPS. The gap between High and Ultra is only 6.1 FPS, which suggests diminishing returns from the Ultra preset at this resolution. All four presets remain playable, with the worst case (Ultra) still delivering 16.4 FPS above the 60 FPS threshold.

At 3840x2160, the picture changes. Low averages 105.4 FPS, which is still excellent. Medium averages 86.2 FPS. High averages 50.7 FPS, falling below the 60 FPS threshold. Ultra averages 48.6 FPS, the lowest recorded figure in the entire dataset. The 4K High and Ultra presets are the only configurations in the measured results that fail to reach 60 FPS. The delta between Medium and High at 4K is 35.5 FPS, a much steeper penalty than the 6.1 FPS difference between High and Ultra at 1440p.

The full dataset shows no min or max FPS values, so the analysis relies entirely on averages. The absence of frame time variance data means the database cannot confirm whether any preset suffers from stutter or frame pacing issues. What the averages do show is a smooth, predictable scaling pattern: the Core i5-14600KF and GTX 1070 combination loses roughly 30 to 40 FPS at each resolution step when settings are held constant, with the biggest penalties occurring at 4K High and Ultra.

Similar Performance Alternatives

The CPU's nearest rivals, based on average benchmark score, are all within 0.8% of the Core i5-14600KF. The AMD Ryzen 9 7900 sits 0.3% lower, which means a system built with that processor would deliver virtually identical CPU-bound performance in Inside. The AMD Ryzen 7 PRO 5755G is 0.4% lower, and the Intel Core Ultra 5 245 is 0.8% lower. The only rival ahead is the AMD Ryzen AI Max+ 388, which beats the Core i5-14600KF by 0.8%. For a game like Inside, which relies far more on GPU throughput than CPU compute, swapping to any of these processors would change the measured FPS by less than 1%, well within run-to-run variance.

The GPU's nearest rivals are also tightly clustered. The AMD FirePro W5000 has an average score of 9803, which is 0.2% higher than the GTX 1070's 9780. The NVIDIA Quadro M2000M scores 9832, 0.5% higher. On the lower side, the NVIDIA Tesla M10 scores 9724, 0.6% lower, and the NVIDIA Tesla C2070 scores 9716, 0.7% lower. None of these cards are gaming-focused products, but in raw compute terms they would behave nearly identically to the GTX 1070 in Inside. The practical takeaway is that any of these five GPUs would produce frame rates within a rounding error of the numbers recorded for the GTX 1070.

It is importantly the GTX 1070 sits at the 47th percentile of all GPUs, while the Core i5-14600KF sits at the 90th percentile of all CPUs. This disparity reinforces the conclusion that the GPU is the limiting component. Users who pair this CPU with a faster GPU would see substantial gains in Inside, while users who pair this GPU with a slower CPU would see almost no change.

The Verdict

Yes, this PC can run Inside, and it can do so at 60 FPS in the majority of tested configurations. At 1920x1080, the verdict lists all four presets as playable, with Ultra achieving 110.8 FPS average. At 2560x1440, all four presets are also playable, with Ultra at 76.4 FPS average. At 3840x2160, only Low and Medium are playable; Medium is the best playable setting, delivering 86.2 FPS average. The 4K High preset (50.7 FPS) and Ultra preset (48.6 FPS) both miss the 60 FPS threshold.

For a 1080p or 1440p display, this combination is overqualified. The game runs at more than double the playability threshold at 1080p Ultra, and it still clears 60 FPS by a comfortable margin at 1440p Ultra. For a 4K display, the recommendation is to use Medium settings, which provide a smooth 86.2 FPS average while avoiding the steep performance cliff that appears when moving to High. Users who insist on 4K High or Ultra would need to accept frame rates in the high 40s to low 50s, which is below the standard playability threshold but still visually smooth for a slow-paced puzzle platformer.

The game's release date of July 2016 predates both the GTX 1070 (June 2016) and the Core i5-14600KF (October 2023). Inside is a side-scrolling puzzle platformer with modest rendering demands, so the modern CPU combined with the aging but capable GPU produces strong results. The data shows no configuration that drops below 48 FPS, and only two configurations drop below 60 FPS.

How This Combo Ranks

The Intel Core i5-14600KF plus NVIDIA GeForce GTX 1070 combination ranks 3095th out of 3716 tested combos in Inside. This places it in the lower 17% of all recorded configurations, which is exactly what the component-level percentiles suggest: a top-tier CPU (90th percentile) paired with a mid-tier GPU (47th percentile) produces a system that lands well below the top of the combined rankings.

The ranking is driven almost entirely by the GPU. The GTX 1070's average benchmark score of 9780 places it in the 47th percentile of all GPUs, and its nearest rivals are all within 0.7% of its score. In a game like Inside, where the measured FPS scales dramatically with resolution and preset, the GPU's mid-pack standing directly translates into the 4K High and Ultra failures. The CPU's 90th percentile standing, by contrast, contributes little to the final ranking because the game's CPU demand is evidently low enough that even a much weaker processor would produce similar frame rates.

Compared to the full field of 3716 combinations, this pairing is not competitive at the top end. It is, however, entirely serviceable for the game's intended experience. The rank of 3095 reflects the GPU's age and market position, not a fundamental inability to run the game. The measured FPS data proves that the combination handles 1080p and 1440p with ease and handles 4K with preset adjustments. The verdict's playable settings list includes 10 out of 12 tested configurations, and the two failures are confined to the most demanding 4K presets.