Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 94 | 99 | 157 | 193 |
| 1440p QHD | 145 | 154 | 248 | 309 |
| 1080p Full HD | 208 | 219 | 349 | 391 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The Intel Core i5-14600K paired with the AMD Radeon RX 9070 delivers exceptional performance in Inside, far exceeding the 60 FPS playability threshold at every resolution and preset combination tested. The data confirms this is a high-end combination, ranking in the top percentile of tested hardware configurations, with performance headroom so vast that even the most demanding settings at 4K produce frame rates well above what the game requires.
Similar Performance Alternatives
The CPU and GPU in this configuration each sit near distinct performance peers, according to aggregate benchmark scores. For the Intel Core i5-14600K, the nearest rival is the Intel Xeon Gold 5318H, which scores 48,698 versus the i5's 48,618 average — a negligible 0.2% difference. The AMD EPYC 4345P trails by just 0.3% with a score of 48,470, while the Intel Core Ultra 5 245HX is 0.7% behind at 48,287. On the other side, the Intel Core Ultra 5 245 leads by 0.8% with a score of 48,995. These deltas are all within a single percentage point, meaning any of these processors would deliver statistically indistinguishable performance in Inside.
On the graphics side, the AMD Radeon RX 9070's nearest rival is the AMD Radeon RX 6800S, which scores 24,063 against the RX 9070's average of 23,877 — a 0.8% gap. The NVIDIA GeForce RTX 2080 SUPER is 1.2% faster at 24,170, while the NVIDIA GeForce GTX TITAN Z is 0.6% slower at 23,736. The NVIDIA GeForce RTX 3080 Mobile closes out the list, trailing by 1.1% with a score of 23,628. For a game as lightweight as Inside, these rival GPUs would produce nearly identical frame rates, though the RX 9070's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth provide ample headroom for any potential future content.
How This Combo Ranks
This specific CPU-GPU combination ranks 836th out of 3,716 tested configurations in Inside, placing it in the top 22.5% of all tested combos. That percentile ranking is notable because Inside is a puzzle platformer with modest graphical demands; the fact that this combo still lands in the upper quarter of all tested systems indicates substantial raw hardware capability. The ranking reflects not just the GPU's rendering power but also the CPU's ability to feed frames without bottlenecking, given that the i5-14600K carries 14 cores and 20 threads with a boost clock of 5.30 GHz.
The rank becomes more impressive when considering the game's release date of 2016-07-06. Hardware from 2023 and 2025 (the CPU and GPU release dates, respectively) is vastly more powerful than what was typical at the game's launch. The measured frame rates confirm this: even at 4K Ultra, the combo produces 93.6 FPS average, which is more than 50% above the 60 FPS threshold. The combination's high percentile rank among modern systems suggests that Inside presents virtually no challenge to this hardware, making the 836th position more a reflection of the sheer number of high-end configurations in the database than any weakness in this pairing.
Measured FPS Breakdown
The measured FPS data shows a clear pattern of diminishing returns as resolution increases, but with performance remaining exceptional throughout. At 1920x1080, the combo produces an average of 391 FPS on Low settings, dropping to 348.8 FPS on Medium, 219.2 FPS on High, and 208.1 FPS on Ultra. The gap between Low and Ultra at 1080p is 182.9 FPS, indicating that settings changes have a substantial impact but never threaten playability.
Moving to 2560x1440, the averages are 308.8 FPS on Low, 247.9 FPS on Medium, 153.7 FPS on High, and 145.3 FPS on Ultra. The drop from 1080p to 1440p ranges from 82.2 FPS (Low) to 62.8 FPS (Ultra), showing that resolution scaling affects lower presets more dramatically. At 3840x2160, the averages fall to 192.7 FPS on Low, 156.5 FPS on Medium, 98.8 FPS on High, and 93.6 FPS on Ultra. The 4K Ultra figure is still 33.6 FPS above the playability threshold, and even the most demanding setting combination never approaches anything resembling a performance concern.
Across all twelve measured configurations, the lowest average FPS is 93.6 (4K Ultra) and the highest is 391 (1080p Low). The scaling from 1080p to 4K at each preset shows a consistent pattern: Ultra settings lose 114.5 FPS when moving from 1080p to 4K, while Low settings lose 198.3 FPS. This indicates that the GPU is the primary scaling factor at higher resolutions, though the CPU's strong single-thread performance (2,064 in Cinebench R23 single-core) keeps minimum frame rates stable even in physics-heavy puzzle sequences.
The Verdict
The data is unambiguous: this PC can run Inside at maximum settings across all tested resolutions with substantial headroom. The verdict by resolution confirms that all four settings (Low, Medium, High, Ultra) are playable at every resolution, with the best settings at each being Ultra. At 1920x1080, Ultra delivers 208.1 FPS average; at 2560x1440, Ultra delivers 145.3 FPS; and at 3840x2160, Ultra delivers 93.6 FPS. Every single configuration exceeds the 60 FPS playable threshold by at least 33.6 FPS (the 4K Ultra case).
The playable threshold of 60 FPS is not merely met but vastly surpassed. Even the weakest measured configuration — 4K Ultra at 93.6 FPS — provides a 56% margin over the threshold. This means the system can handle not only the base game but also any potential frame rate drops during complex scenes, physics interactions, or screen transitions without ever dipping below playable levels. For a puzzle platformer where precise timing matters, the consistent high frame rates ensure smooth gameplay with no perceptible stutter.
CPU and GPU Roles
The benchmark data reveals that the GPU plays the dominant role in scaling performance across resolutions, while the CPU's contribution remains consistent. At 1080p, where CPU bottlenecks are more common, the combo still achieves 391 FPS on Low settings — a figure that suggests the i5-14600K's 14 cores and 20 threads are more than sufficient for Inside's physics and logic. The CPU's passmark single-thread score of 4,270 and Cinebench R23 single-core score of 2,064 indicate strong per-core performance, which matters for a game that likely relies on a single main thread for game logic.
The scaling between resolutions tells the story of GPU dominance. Moving from 1080p to 1440p at Ultra settings reduces FPS by 62.8 (from 208.1 to 145.3), and moving from 1440p to 4K reduces it by another 51.7 (from 145.3 to 93.6). This consistent degradation with resolution increase is characteristic of GPU-bound scenarios. Conversely, the settings scaling at a fixed resolution shows the GPU's headroom: at 4K, moving from Low to Ultra reduces FPS from 192.7 to 93.6, a 99.1 FPS drop that still leaves the system comfortably above 60 FPS.
The CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the 391 FPS figure is likely approaching the CPU's frame delivery limit, though the i5-14600K's 5.30 GHz boost clock and 24 MB of shared L3 cache keep it from becoming a bottleneck. The fact that 1080p Ultra (208.1 FPS) is only slightly lower than 1440p High (153.7 FPS) suggests that at these frame rates, the CPU is still keeping pace with the GPU's output. For a game like Inside, with its 2D side-scrolling perspective and limited draw distance, the CPU requirements are modest, and this combo's processing power is effectively overkill.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, delivering 208.1 FPS average. This is the optimal choice for maximum visual quality, as the game's atmospheric lighting and shadow effects benefit from higher settings without any performance compromise.
At 2560x1440, Ultra remains the best choice, with an average of 145.3 FPS. The 1440p Ultra preset provides a 85.3 FPS margin over the playability threshold, ensuring no perceptible frame drops even during the game's most visually complex sequences, such as the underwater sections with dynamic lighting.
At 3840x2160, Ultra again tops the list with 93.6 FPS average. This is the only resolution where the frame rate dips below 100 FPS, but the 33.6 FPS margin over 60 FPS still provides smooth, tear-free gameplay. The 4K Ultra preset is fully playable, and users with 4K displays can run the game at maximum settings without needing to compromise. For users prioritizing frame rate over visual fidelity, the 4K High preset at 98.8 FPS offers a modest 5.2 FPS improvement, but the visual difference between High and Ultra in Inside is likely minimal given the game's stylized art direction. The data supports running Ultra at all resolutions for the best experience.