Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 98 | 103 | 165 | 206 |
| 1440p QHD | 156 | 164 | 263 | 304 |
| 1080p Full HD | 218 | 228 | 313 | 339 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 3080 Ti is a formidable combination for Inside, ranking in the 850th position out of 3716 tested combos. This places the setup in the top 23% of all configurations tested, which is impressive for a game released in 2016. The combo's percentile ranking is reinforced by the individual components: the CPU sits at the 83rd percentile against all CPUs, and the GPU also sits at the 83rd percentile against all GPUs. This symmetry suggests a well-balanced pairing where neither component is dramatically underperforming relative to the other. The data indicates that this system is not merely adequate for the game but is positioned to provide a high-refresh-rate experience without compromising visual fidelity.
How This Combo Ranks
The rank of 850 out of 3716 combos is a clear signal that this hardware pairing is in the upper quartile of tested systems. This is a strong result, especially considering that Inside is a side-scrolling puzzle platformer with a stylized, minimalist aesthetic that is not typically associated with extreme hardware demands. The high rank suggests that the combination of the i5-14400F and RTX 3080 Ti provides a substantial performance headroom. This is not a marginal setup that barely clears playability thresholds; it is one that far exceeds them. The data implies that users with this configuration will likely be limited by the display's refresh rate rather than the hardware's raw capabilities, as the frame rates achieved are exceptionally high across all tested resolutions.
CPU and GPU Roles
The benchmark data reveals a clear pattern regarding the roles of the CPU and GPU across different resolutions. At 1920x1080, the system achieves an average of 339 FPS on Low settings, which drops to 313 FPS on Medium and 228 FPS on High. The scaling from Low to Ultra (218 FPS) shows a 121 FPS difference, indicating that the GPU is being tasked more heavily as settings increase, but the CPU is still capable of feeding it adequately. However, the most revealing metric is the scaling between resolutions. At 2560x1440 Low, the average FPS is 304, which is only a 35 FPS drop from 1080p Low. This modest decline suggests that at lower settings, the CPU is a significant contributor to the frame rate, as the GPU is not yet saturated. In contrast, moving from 1440p High (164 FPS) to 4K High (103 FPS) is a 61 FPS drop, which is a much steeper decline. This indicates that at higher settings and resolutions, the GPU becomes the primary bottleneck, as the rendering load increases significantly. The 4K Medium result (165 FPS) versus 4K Low (206 FPS) further confirms this, showing a 41 FPS difference purely from settings changes at the same resolution.
Similar Performance Alternatives
For the CPU, the nearest rivals are closely matched in average benchmark scores. The AMD Ryzen 7 PRO 8840U has an average score of 32233, which is only 0.1% lower than the i5-14400F's 32279. The Intel Core i9-11900 is also nearly identical, with a score of 32226 and a deltaPct of 0.2%. On the other side, the AMD Ryzen 7 6800HS scores 32354, which is 0.2% higher. These minuscule deltas mean that in real-world gaming scenarios, especially for a title like Inside, the performance differences would be imperceptible. The data suggests that users with any of these CPUs would see virtually identical frame rates. For the GPU, the nearest rivals show a slightly wider variance. The AMD Radeon Pro 5300 scores 40870, which is 0.8% lower than the RTX 3080 Ti's 41187 average. The NVIDIA Tesla M40 24 GB scores 41707, 1.2% higher, and the Tesla M40 scores 41897, 1.7% higher. These are all professional or workstation cards, which may have different driver optimizations, but the raw compute scores are very close. The NVIDIA GeForce RTX 5070 is the most interesting rival, scoring 40377, which is 2% lower. This indicates that the older RTX 3080 Ti is still highly competitive with newer generation hardware.
FAQ
Q: What is the highest graphical preset that can maintain 60 FPS at 4K resolution?
A: The data shows that all four presets—Low, Medium, High, and Ultra—at 3840x2160 remain above the 60 FPS threshold. The Ultra preset achieves an average of 98 FPS, which is the most demanding setting tested.
Q: How does the frame rate scale from 1080p to 4K on the High preset?
A: At 1920x1080 High, the average is 228 FPS. At 2560x1440 High, it drops to 164 FPS. At 3840x2160 High, it falls to 103 FPS. This represents a 125 FPS drop from 1080p to 4K, indicating a significant GPU load increase at higher resolutions.
Q: Is the CPU a bottleneck at any setting for this game?
A: The data suggests the CPU is more influential at lower resolutions and settings. For example, at 1080p Low, the system hits 339 FPS, and at 1440p Low, it still reaches 304 FPS. The relatively small drop between these two resolutions indicates the CPU is keeping up well. However, at 4K Ultra (98 FPS), the GPU is clearly the limiting factor.
Q: What is the best setting combination for a 144Hz monitor at 1440p?
A: The Ultra preset at 2560x1440 achieves an average of 156 FPS, which is above the 144Hz threshold. The High preset also works, at 164 FPS, but Ultra offers higher visual fidelity while still exceeding 144 FPS.
Q: How does the RTX 3080 Ti compare to the RTX 5070 in this context?
A: According to the average benchmark scores, the RTX 3080 Ti scores 41187, while the RTX 5070 scores 40377. This gives the RTX 3080 Ti a 2% advantage, meaning the older card is slightly faster on average.
Q: Are the minimum FPS values provided for all settings?
A: No, the FACT PACK only includes min and max FPS values for the Medium preset at each resolution. For example, at 1080p Medium, the min is 266 FPS and the max is 360 FPS. Other presets only have average FPS data.
Measured FPS Breakdown
At 3840x2160, the system delivers an average of 206 FPS on Low settings, which is exceptionally high for 4K. Moving to Medium, the average drops to 165 FPS, with a minimum of 140 FPS and a maximum of 190 FPS. The High preset yields 103 FPS average, and Ultra drops to 98 FPS. All of these are well above the 60 FPS playability threshold. At 2560x1440, the performance is even more robust. Low settings produce an average of 304 FPS, while Medium achieves 263 FPS (min 223, max 302). High settings average 164 FPS, and Ultra averages 156 FPS. The 1440p results show that even the most demanding preset maintains a frame rate that is more than double the 60 FPS threshold. At 1920x1080, the frame rates are staggering. Low averages 339 FPS, Medium averages 313 FPS (min 266, max 360), High averages 228 FPS, and Ultra averages 218 FPS. The minimum recorded frame rate across any tested configuration is 140 FPS, which occurred at 4K Medium. This is still vastly above the playable threshold, indicating that the system never experiences a noticeable stutter or drop in performance.
Best Settings per Resolution
For 3840x2160, the most demanding preset that remains at or above 60 FPS is Ultra, which achieves an average of 98 FPS. This is a clear indicator that the system can handle the game at maximum visual quality in 4K without any concerns. At 2560x1440, the Ultra preset also provides the best visual fidelity, with an average of 156 FPS. This is more than sufficient for high-refresh-rate gaming on a 144Hz monitor. For 1920x1080, the Ultra preset is again the best choice, delivering an average of 218 FPS. This is an exceptional result that would satisfy even the most demanding 240Hz displays. In every resolution, the system is not just hitting the target but significantly exceeding it, allowing users to prioritize visual quality without any sacrifice to smoothness.
The Verdict
The data is unequivocal: this PC can run Inside flawlessly. The verdictByResolution confirms that all tested settings at all three resolutions—3840x2160, 2560x1440, and 1920x1080—are playable, meaning they all clear the 60 FPS threshold. At 4K, the best setting is Ultra with 98 FPS, at 1440p it is Ultra with 156 FPS, and at 1080p it is Ultra with 218 FPS. The system is so powerful that the user can max out the game's graphical settings at any resolution and still achieve frame rates that are far above what is required for smooth gameplay. The combination of the i5-14400F and RTX 3080 Ti is not just capable; it is overkill for this title, providing a level of performance that ensures absolute fluidity in all scenarios. The only potential limitation would be a display's refresh rate, as the system is capable of outputting frames well beyond standard 60Hz or even 144Hz monitors.