Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

87%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
359 FPS
Ultra 1080p Measured
263 FPS

1440p (2K / QHD)

Low 1440p Measured
321 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
250 FPS
Ultra 4K Measured
119 FPS
3.6ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 27,799
Graphics Card
Required 27,118
Your GPU 49,957

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 119 125 200 250
1440p QHD 189 199 297 321
1080p Full HD 263 276 331 359

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 276
1920x1080 Low 359
1920x1080 Medium 331
1920x1080 Ultra 263
2560x1440 High 199
2560x1440 Low 321
2560x1440 Medium 297
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 250
3840x2160 Medium 200
3840x2160 Ultra 119

Performance Analysis: Inside on Your System

The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 5070 Ti delivers an extraordinary performance envelope for Inside, a Puzzle Platformer released in 2016. The measured FPS data shows this combination obliterates the 60 FPS playable threshold at every resolution and preset tested, with average frame rates ranging from 119 FPS at 4K Ultra to 359 FPS at 1080p Low. This is a system that does not merely run the game; it transforms a side-scrolling puzzle title into a showcase for high-refresh-rate displays at maximum settings.

Similar Performance Alternatives

The CPU and GPU in this combo each have near-neighbor rivals that would produce broadly similar results in Inside, based on aggregate benchmark scores. For the Intel Core i5-12600KF, the nearest rival is the Intel Core i9-10900K, which scores 27872 versus the i5's 27799, a delta of only -0.3% — meaning the i9-10900K is essentially tied in overall processing power. The AMD Ryzen 7 5800X3D is another near-identical alternative, with an avgScore of 27896 and a deltaPct of -0.3%, indicating the 12600KF trails it by a negligible margin. On the other side, the AMD Ryzen 5 8500GE scores 27712, which is 0.3% higher than the 12600KF, while the AMD Ryzen 7 6800U sits at 27887, also -0.3% relative to the Intel part. All four rivals cluster within a ±0.3% band around the 12600KF's avgBenchmarkScore of 27799, so swapping to any of these CPUs would yield nearly indistinguishable frame rates in Inside, which is not a CPU-heavy title.

On the GPU side, the NVIDIA GeForce RTX 5070 Ti has an avgBenchmarkScore of 49957, placing it in the 86th percentile among all GPUs. Its closest rival by score is the AMD Radeon RX Vega 64, which scores 50001, a deltaPct of -0.1% — effectively a dead heat. The Intel Arc A550M scores 49737, just 0.4% behind the RTX 5070 Ti, while the AMD Radeon RX 6900 XT scores 50951, putting it 2% ahead. The AMD Radeon RX 6800 XT scores 48477, which is 3.1% behind the 5070 Ti. In the context of Inside, where the RTX 5070 Ti already produces 263 FPS at 1080p Ultra, a 3% difference would translate to roughly 8 FPS — imperceptible in practice. The data suggests that any of these GPUs would deliver a similar experience, all comfortably exceeding the 60 FPS threshold at every resolution.

CPU and GPU Roles

The benchmark data reveals a clear pattern: the GPU is the dominant component in Inside, but the CPU becomes more relevant at lower resolutions where frame rates are extremely high. At 3840x2160, the RTX 5070 Ti's rendering load is substantial, as evidenced by the scaling from Low to Ultra. The average FPS at 4K Low is 250, dropping to 200 at Medium, then to 125 at High, and finally 119 at Ultra. This 131 FPS spread between Low and Ultra at 4K demonstrates that the GPU's pixel-pushing capability is the primary constraint. At 2560x1440, the same settings progression yields 321 FPS (Low), 297 FPS (Medium), 199 FPS (High), and 189 FPS (Ultra) — a 132 FPS gap, again dominated by GPU load. At 1920x1080, the numbers are 359 FPS (Low), 331 FPS (Medium), 276 FPS (High), and 263 FPS (Ultra), with a 96 FPS spread.

The CPU's role becomes evident when comparing the same settings across resolutions. For example, at Medium settings, the 1080p average is 331 FPS, while 1440p Medium is 297 FPS, and 4K Medium is 200 FPS. The drop from 1080p to 1440p is only 34 FPS, but from 1440p to 4K it's 97 FPS — the GPU is clearly the bottleneck at higher resolutions. Conversely, at 1080p Low, the 359 FPS figure approaches the practical limit of what even a powerful CPU can feed to the GPU in a game like Inside, which has simple geometry but requires consistent physics updates. The i5-12600KF's 10 cores and 16 threads, with a boost clock of 4.90 GHz, are sufficient to keep the RTX 5070 Ti fed at these stratospheric frame rates, but the data implies that at 1080p Low, the CPU is doing more relative work than at 4K Ultra, where the GPU's 43.94 TFLOPS FP32 throughput is the limiting factor.

Measured FPS Breakdown

The measured FPS data is comprehensive, covering three resolutions and four settings tiers. At 3840x2160, the average FPS ranges from 119 at Ultra to 250 at Low. The Medium preset shows the only complete min/max data in this resolution: an average of 200 FPS, with a minimum of 170 and a maximum of 230. This 60 FPS delta between min and max suggests some scene-dependent variability, likely in areas with many dynamic objects or complex lighting. The High preset averages 125 FPS, while Ultra averages 119 FPS — a mere 6 FPS difference, indicating diminishing returns beyond High settings at 4K.

At 2560x1440, the averages are 321 FPS (Low), 297 FPS (Medium), 199 FPS (High), and 189 FPS (Ultra). The Medium preset again provides min/max data: 252 minimum and 341 maximum, a spread of 89 FPS. This wider variance at 1440p compared to 4K suggests that lower resolution amplifies frame rate swings because the GPU can render frames faster, exposing CPU-side hitches. The jump from Medium to High is 98 FPS, while High to Ultra is only 10 FPS — a pattern that repeats across all resolutions, showing that High is a significant quality step, but Ultra is a marginal increment for this game.

At 1920x1080, the averages are 359 FPS (Low), 331 FPS (Medium), 276 FPS (High), and 263 FPS (Ultra). The Medium preset's min/max are 281 and 381, respectively, a 100 FPS range. This is the largest absolute variance in the dataset, which aligns with the interpretation that at 1080p, the system is pushing frame rates so high that any transient CPU load spike creates a noticeable dip. The 359 FPS at Low is the single highest average in the entire measurement set, demonstrating that Inside's minimalist art style and simple geometry allow the RTX 5070 Ti to operate at near-peak throughput when not constrained by higher resolution or more demanding effects.

How This Combo Ranks

The combination of the Intel Core i5-12600KF and NVIDIA GeForce RTX 5070 Ti holds a combo rank of 334 out of 3716 tested combinations in Inside. This places it in the top 9% of all tested combos for this specific game, which is remarkable given that the game is not a demanding title by modern standards. The top 334 ranking indicates that while many systems can run Inside well, this particular pairing is in the upper echelon, outranking the vast majority of alternatives. The RTX 5070 Ti's 86th percentile GPU ranking (vs. all GPUs) and the 12600KF's 79th percentile CPU ranking (vs. all CPUs) combine to produce a system that sits in the 91st percentile of combos for this game. The data suggests that the GPU's high percentile is the primary driver of this high combo rank, since Inside's rendering requirements scale heavily with resolution and effects, and the 5070 Ti's 896.0 GB/s memory bandwidth and 235.4 GPixel/s pixel rate are more than sufficient for the game's 2D-like rendering.

What is notable is the gap between the CPU's 79th percentile and the combo's 91st percentile ranking. This implies that the GPU is the differentiator for Inside, and that a weaker CPU paired with the same GPU would likely still achieve a similar combo rank. Conversely, pairing the 12600KF with a much weaker GPU would drop the combo rank significantly, because the 4K Ultra preset, which averages 119 FPS, still demands substantial GPU throughput. The 3716 combos tested include many with less capable GPUs, and the data shows that the 5070 Ti's headroom is what pushes this combo into the top decile.

The Verdict

Yes, this PC can absolutely run Inside — and it does so with overwhelming headroom. The verdict data confirms that all four settings (Low, Medium, High, Ultra) are playable at every resolution tested, meaning all average FPS values are at or above the 60 FPS threshold. At 3840x2160, the best playable setting is Ultra, which averages 119 FPS — nearly double the playable threshold. At 2560x1440, Ultra averages 189 FPS, which is more than triple the threshold. At 1920x1080, Ultra averages 263 FPS, over four times the threshold. The minimum FPS values recorded (170 at 4K Medium, 252 at 1440p Medium, 281 at 1080p Medium) all stay well above 60 FPS, indicating that even in the most demanding scenes, there is no risk of dropping below playable frame rates. For a game like Inside, which features atmospheric lighting and subtle particle effects, the Ultra preset at 4K will deliver a flawless experience on a high-refresh-rate display, while 1440p and 1080p owners can push beyond 189 FPS and 263 FPS respectively, making use of 240 Hz or even 360 Hz monitors.

FAQ

*Q: What is the highest average FPS this combo achieves in Inside?*

A: The highest average FPS is 359, achieved at 1920x1080 with Low settings. This is the peak performance observed across all resolution and settings combinations.

*Q: Is the RTX 5070 Ti's performance in Inside noticeably better than its nearest rival?*

A: The data shows the RTX 5070 Ti scores 49957 on average benchmarks, while its nearest rival, the AMD Radeon RX Vega 64, scores 50001 — a delta of -0.1%. This means the 5070 Ti is essentially tied with the Vega 64 in raw performance, so in Inside, the difference would be negligible, likely under 1 FPS at any given setting.

*Q: Can this system run Inside at 4K Ultra with a high refresh rate?*

A: Yes, the measured average FPS at 3840x2160 Ultra is 119 FPS. This is just under 120 FPS, meaning a 120 Hz display would show occasional dips below the refresh rate, but a 100 Hz or 144 Hz display would show consistent frame delivery above the 60 FPS threshold.

Q: How does the i5-12600KF compare to the Ryzen 7 5800X3D for this game?

A: The i5-12600KF has an avgBenchmarkScore of 27799, while the Ryzen 7 5800X3D scores 27896, a delta of -0.3%. This is a negligible difference, and in Inside, where the GPU is the bottleneck at higher resolutions, the CPU choice would have minimal impact on frame rates.

Q: What is the most demanding preset that stays at or above 60 FPS at 2560x1440?

A: At 2560x1440, the Ultra preset is the most demanding playable option, with an average FPS of 189. This is significantly above the 60 FPS threshold, so there is no risk of performance issues.

Q: Is there any resolution or setting where this combo dips below 60 FPS?

A: No. The lowest average FPS recorded across all measurements is 119 at 4K Ultra, and the lowest minimum FPS is 170 at 4K Medium. All values are well above the 60 FPS playable threshold.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS average is Ultra, which achieves an average of 119 FPS. This is the recommended setting for 4K, as it provides the highest visual quality while still delivering nearly double the playable threshold.

At 2560x1440, the best playable preset is Ultra, averaging 189 FPS. This is more than three times the 60 FPS threshold, so users can enable all visual effects without concern. The 1440p Ultra setting offers a 70 FPS advantage over 4K Ultra, making it the sweet spot for high-refresh-rate gaming.

At 1920x1080, the best playable preset is also Ultra, with an average of 263 FPS. This is over four times the playable threshold, meaning even on a 240 Hz monitor, the system will consistently hit frame rates that saturate the display's refresh rate. For competitive play or maximum smoothness, dropping to Low at 1080p yields 359 FPS, but the Ultra preset is still the most demanding option that clears 60 FPS with massive headroom.