Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 119 | 125 | 193 | 209 |
| 1440p QHD | 185 | 188 | 226 | 244 |
| 1080p Full HD | 206 | 210 | 252 | 273 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
Measured FPS Breakdown
The recorded data for this combination of Intel Core i5-11400F and NVIDIA GeForce RTX 5070 Ti running Inside shows remarkably high frame rates across all tested configurations. The game is a puzzle platformer from 2016, and the measurements confirm it presents minimal challenge to this hardware pairing.
At 1920x1080, the lowest tested resolution, the average frame rates range from 206 to 273 FPS depending on the preset. The Low preset delivers 273 FPS on average, while Medium produces 252 FPS with a recorded minimum of 214 FPS and maximum of 290 FPS. High settings yield 210 FPS average, and the Ultra preset still maintains 206 FPS. Every configuration at 1080p clears the 60 FPS playable threshold by a wide margin, with the most demanding preset sitting at more than three times that baseline.
Moving to 2560x1440, the performance remains exceptionally high. The Low preset averages 244 FPS, Medium averages 226 FPS with a minimum of 192 FPS and maximum of 259 FPS, High averages 188 FPS, and Ultra averages 185 FPS. The spread between the least and most demanding presets at this resolution is 59 FPS, showing that even the heaviest settings do not meaningfully constrain the hardware.
At 3840x2160, 4K resolution, the frame rates stay well above the playable threshold. Low settings produce an average of 209 FPS, Medium drops to 193 FPS with a minimum of 164 FPS and maximum of 222 FPS, High averages 125 FPS, and Ultra averages 119 FPS. The gap between Low and Ultra at 4K is 90 FPS, which indicates that the Ultra preset imposes a more substantial load, yet even the worst measured average remains nearly double the 60 FPS playability cutoff.
The data reveals a consistent pattern: the RTX 5070 Ti and Core i5-11400F combination never dips below 164 FPS in any recorded measurement, which occurs at 4K Medium. The minimum FPS values are only recorded for the Medium preset at each resolution, and those figures range from 164 FPS at 4K to 214 FPS at 1080p. This suggests that even transient frame drops stay far above any potential stutter concerns.
CPU and GPU Roles
The benchmark results indicate that this game is far more dependent on the GPU than the CPU at higher resolutions, while the CPU becomes relatively more relevant at lower resolutions. The scaling pattern across resolutions provides clear evidence of this dynamic.
At 1920x1080, the CPU has more headroom to feed the GPU, and the frame rates are highest overall. The difference between Low and Ultra at 1080p is 67 FPS (273 versus 206), which represents a 32.5 percent reduction in performance when moving to the most demanding preset. At 1440p, the same preset comparison shows a 59 FPS difference (244 versus 185), a 24.2 percent reduction. At 4K, the difference grows to 90 FPS (209 versus 119), which is a 43.1 percent reduction.
This pattern indicates that the Ultra preset at 4K creates the largest relative performance hit, suggesting the GPU becomes the limiting factor at that resolution. The Core i5-11400F, with its 6 cores and 12 threads, provides sufficient processing power to keep the GPU fed at lower resolutions, but the 4K Ultra configuration leans more heavily on the graphics card.
The Medium preset measurements, which include both minimum and maximum FPS, further illuminate the CPU-GPU balance. At 1080p Medium, the spread between minimum and maximum is 76 FPS (214 to 290). At 1440p Medium, the spread is 67 FPS (192 to 259). At 4K Medium, the spread narrows to 58 FPS (164 to 222). The shrinking range at higher resolutions indicates that the GPU becomes the bottleneck, limiting the maximum frame rate and compressing the overall variance.
The i5-11400F's benchmark scores support its role as a capable partner for this GPU. Its Cinebench R23 multicore score of 14340 and single-core score of 2024 place it in the 71st percentile among all CPUs. The Geekbench multicore score of 7737 and single-core score of 1777 further confirm that this processor can handle the demands of a 2016 puzzle platformer without becoming a constraint.
Similar Performance Alternatives
The database's nearest rival comparisons provide context for how other hardware would behave in similar configurations. For the CPU, the Intel Core i5-11400F has an average benchmark score of 17177, and its nearest rivals are all within a narrow band of performance.
The AMD EPYC 7H12 scores 17120, which is 0.3 percent lower than the i5-11400F. The Intel Core i5-12450H scores 17239, 0.4 percent higher. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6 percent higher. The Intel Core Ultra 7 164U scores 17074, 0.6 percent lower. These four alternatives would deliver nearly identical CPU-bound behavior in Inside, with differences so small they would be imperceptible in real-world frame rates.
For the GPU, the NVIDIA GeForce RTX 5070 Ti has an average benchmark score of 49957, placing it in the 86th percentile among all GPUs. Its nearest rivals show a slightly wider spread. The AMD Radeon RX Vega 64 scores 50001, just 0.1 percent higher. The Intel Arc A550M scores 49737, 0.4 percent lower. The AMD Radeon RX 6900 XT scores 50951, which is 2 percent higher. The AMD Radeon RX 6800 XT scores 48477, 3.1 percent lower.
In the context of Inside, any of these GPU alternatives would produce frame rates well above the 60 FPS threshold at every resolution and preset. The RX 6900 XT, being 2 percent faster on average, would deliver marginally higher FPS, while the RX 6800 XT, at 3.1 percent slower, would still comfortably exceed playability requirements. The practical differences among these GPUs in this specific game would be small, given that the RTX 5070 Ti already achieves 119 FPS at 4K Ultra.
FAQ
Q: Can this PC run Inside at 4K with maximum settings?
A: Yes. At 3840x2160 with Ultra settings, the combination of Intel Core i5-11400F and NVIDIA GeForce RTX 5070 Ti delivers an average of 119 FPS, which is well above the 60 FPS playable threshold.
Q: What is the highest average frame rate recorded for this combination?
A: The highest recorded average is 273 FPS, achieved at 1920x1080 with Low settings. The next highest is 252 FPS at 1080p Medium, followed by 244 FPS at 1440p Low.
Q: How much performance is lost when moving from Low to Ultra settings at each resolution?
A: At 1080p, the drop is from 273 to 206 FPS, a reduction of 67 FPS. At 1440p, the drop is from 244 to 185 FPS, a reduction of 59 FPS. At 4K, the drop is from 209 to 119 FPS, a reduction of 90 FPS.
Q: Does the CPU or GPU limit performance more in this game?
A: The data indicates the GPU becomes the limiting factor at higher resolutions, particularly at 4K Ultra where the relative performance hit is largest at 43.1 percent compared to Low settings. At 1080p, the CPU has more headroom and the GPU is less constrained.
Q: What are the minimum FPS values recorded at Medium settings?
A: At 1080p Medium, the minimum FPS is 214. At 1440p Medium, the minimum is 192. At 4K Medium, the minimum is 164. All of these remain far above the 60 FPS playable threshold.
Q: How does the RTX 5070 Ti compare to its nearest rival, the RX 6900 XT?
A: The RX 6900 XT has an average benchmark score of 50951, which is 2 percent higher than the RTX 5070 Ti's 49957. In Inside, this would translate to slightly higher frame rates, though both GPUs already exceed playability requirements at all settings.
Best Settings per Resolution
At 1920x1080, the Ultra preset is the most demanding configuration that stays at or above 60 FPS. The recorded average at these settings is 206 FPS, which is more than three times the playable threshold. There is no reason to reduce settings at this resolution, as even the heaviest preset leaves enormous performance headroom.
At 2560x1440, the Ultra preset also achieves the best balance of visual quality and performance. The average FPS at this configuration is 185, still far above the 60 FPS requirement. The gap between Ultra and the next lower preset, High at 188 FPS, is only 3 FPS, making Ultra the obvious choice for maximum visual fidelity without sacrificing smoothness.
At 3840x2160, the Ultra preset delivers an average of 119 FPS, which comfortably exceeds the 60 FPS playable threshold. The High preset at 125 FPS is only 6 FPS faster, so the visual benefits of Ultra come at a negligible performance cost. The database confirms that Ultra is the best setting at 4K for this hardware combination.
Across all three resolutions, the Ultra preset is the recommended choice. The recorded data shows no scenario where dropping below Ultra is necessary to maintain playable frame rates. The lowest average FPS across all Ultra configurations is 119 at 4K, still nearly double the 60 FPS baseline.
How This Combo Ranks
The database ranks this specific combination of Intel Core i5-11400F and NVIDIA GeForce RTX 5070 Ti at position 1031 out of 3716 tested combinations for Inside. This places the pairing in the upper third of all tested systems, indicating that it delivers performance well above the median.
The rank reflects the substantial headroom this combination provides for a game of Inside's age and genre. A puzzle platformer from 2016 places far less demand on hardware than modern AAA titles, and the RTX 5070 Ti's 86th percentile GPU ranking, combined with the i5-11400F's 71st percentile CPU ranking, creates a system that far exceeds the game's requirements.
The comparison to other tested combinations suggests that many systems with lower-tier hardware would also run Inside at playable frame rates, but this particular pairing sits comfortably in the upper range of the distribution. The rank of 1031 out of 3716 means approximately 72 percent of tested combinations are slower, while 28 percent are faster.
The Verdict
The data confirms that this PC can run Inside at all tested resolutions and presets with frame rates far above the 60 FPS playable threshold. The verdict by resolution is unambiguous: every configuration passes.
At 3840x2160, the playable settings include High, Low, Medium, and Ultra, with the best setting being Ultra at an average of 119 FPS. At 2560x1440, all four presets are playable, with Ultra again being the best choice at 185 FPS. At 1920x1080, Ultra delivers 206 FPS, and all other presets perform even higher.
The lowest recorded average FPS across the entire measurement set is 119 at 4K Ultra, which is 59 FPS above the playable threshold. The lowest recorded minimum FPS is 164 at 4K Medium, still 104 FPS above the threshold. No configuration in the database comes close to dropping below 60 FPS, and the hardware provides massive performance reserves for this game.
For users seeking the best visual experience, the Ultra preset at any resolution is the recommended configuration. The performance cost of Ultra compared to lower presets is minimal in relative terms, and the frame rates remain exceptionally high. This system does not merely run Inside; it runs it with performance to spare at every setting combination.