Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

59%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
233 FPS
Ultra 1080p Measured
176 FPS

1440p (2K / QHD)

Low 1440p Measured
208 FPS
Ultra 1440p Measured
132 FPS

4K (Ultra HD)

Low 4K Measured
175 FPS
Ultra 4K Measured
83 FPS
5.6ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 14,185
Graphics Card
Required 27,118
Your GPU 22,549

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 83 87 140 175
1440p QHD 132 139 192 208
1080p Full HD 176 179 215 233

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 179
1920x1080 Low 233
1920x1080 Medium 215
1920x1080 Ultra 176
2560x1440 High 139
2560x1440 Low 208
2560x1440 Medium 192
2560x1440 Ultra 132
3840x2160 High 87
3840x2160 Low 175
3840x2160 Medium 140
3840x2160 Ultra 83

Performance Analysis: Inside on Your System

The Intel Core i5-10400F paired with the AMD Radeon RX 7700 XT delivers exceptionally high frame rates in Inside, a puzzle platformer from 2016. The measured data shows this combination is vastly overqualified for the game’s demands, clearing the 60 FPS threshold by a wide margin at every resolution and preset tested. The bottleneck here is not the hardware, but the game’s own frame rate limits relative to the sheer power available.

Best Settings per Resolution

At 3840x2160 (4K), the most demanding preset that stays at or above 60 FPS is Ultra, which records an average of 83 FPS. This is notable because Ultra is the highest quality setting available, and it still maintains a comfortable margin above the 60 FPS target. The data shows that even at this demanding resolution, there is no need to compromise on visual quality.

At 2560x1440 (1440p), the Ultra preset also achieves the best playable result, with an average of 132 FPS. This is more than double the 60 FPS threshold, indicating that the system has substantial headroom. The gap between the Ultra preset and the next tier down is significant, but the Ultra setting remains the recommended choice for the best visual experience.

At 1920x1080 (1080p), the Ultra preset again stands as the best option, delivering an average of 176 FPS. This is nearly three times the playability threshold. The data confirms that at 1080p, the combination of the i5-10400F and RX 7700 XT is so far beyond the game’s requirements that the limiting factor becomes the display’s refresh rate rather than the hardware.

FAQ

*Q: Can this PC run Inside at 4K with maximum settings?*

A: Yes. At 3840x2160 with the Ultra preset, the system records an average of 83 FPS, which is above the 60 FPS playability threshold. The verdict data lists all four presets (Low, Medium, High, Ultra) as playable at this resolution.

Q: What is the highest playable setting at 1440p?

A: The Ultra preset is the most demanding setting that stays above 60 FPS at 2560x1440, with an average of 132 FPS. All tested presets at this resolution, including Ultra, are marked as playable.

Q: How much faster is the Low preset compared to Ultra at 1080p?

A: At 1920x1080, the Low preset averages 233 FPS, while the Ultra preset averages 176 FPS. This represents a 57 FPS difference, or roughly 32% higher frame rate on Low, but both settings are far above the 60 FPS target.

Q: Does the game ever drop below 60 FPS with this hardware?

A: No. The only recorded frame time data is for Medium settings, and the minimum FPS values are 119 at 4K, 164 at 1440p, and 183 at 1080p. Every minimum recorded is well above 60 FPS.

Q: What is the best preset to use for a 144 Hz monitor at 1440p?

A: The Ultra preset at 2560x1440 averages 132 FPS, which is below 144 FPS. To hit 144 FPS or higher, the Medium preset averages 192 FPS, or the High preset averages 139 FPS, which is close but still under 144. The Low preset averages 208 FPS.

*Q: How does this combo rank among all tested combinations for Inside?*

A: The combination ranks 1973 out of 3716 tested combos. This places it in the 53rd percentile of all tested systems, meaning it performs better than a slight majority of configurations in the database.

Measured FPS Breakdown

The recorded data provides a clear picture of performance across three resolutions and four settings. At 1920x1080, the Low preset delivers an average of 233 FPS, the Medium preset averages 215 FPS with a minimum of 183 and a maximum of 247, the High preset averages 179 FPS, and the Ultra preset averages 176 FPS. The spread from Low to Ultra is 57 FPS, showing that Inside scales predictably with settings but remains extremely fast even at maximum quality.

At 2560x1440, the Low preset averages 208 FPS, the Medium preset averages 192 FPS with a minimum of 164 and a maximum of 221, the High preset averages 139 FPS, and the Ultra preset averages 132 FPS. The drop from Medium to High is 53 FPS, which is a larger relative step than the jump from Low to Medium. This suggests that the High preset introduces a noticeable rendering cost compared to Medium.

At 3840x2160, the Low preset averages 175 FPS, the Medium preset averages 140 FPS with a minimum of 119 and a maximum of 161, the High preset averages 87 FPS, and the Ultra preset averages 83 FPS. The transition from Medium to High at 4K costs 53 FPS, which is the largest single-setting penalty across all resolutions. The Ultra preset is only 4 FPS slower than High at 4K, making High a marginal improvement in cost for almost no visual gain.

The data shows a consistent pattern: resolution scaling has a greater impact than settings scaling at the high end. Moving from 1080p Ultra to 1440p Ultra costs 44 FPS (176 to 132), and moving from 1440p Ultra to 4K Ultra costs 49 FPS (132 to 83). In contrast, moving from High to Ultra at any resolution costs only 3 to 4 FPS.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-10400F, based on average benchmark scores, include the Intel Xeon 6756E, which scores 14163 against the i5’s 14185, a negligible 0.2% difference. The Intel Core 7 160UL scores 14232, placing it 0.3% ahead of the i5. The AMD EPYC 7552 scores 14115, 0.5% behind, and the AMD Ryzen 3 7320C scores 14277, 0.6% ahead. These CPUs would deliver essentially identical performance in Inside, since the game is not likely to stress the processor given the frame rates observed.

On the GPU side, the AMD Radeon RX 7700 XT has an average benchmark score of 22549. The NVIDIA GeForce RTX 5060 Mobile scores 22435, which is 0.5% behind. The NVIDIA GeForce RTX 4060 Mobile scores 22729, 0.8% ahead. The NVIDIA GeForce RTX 2080 scores 22895, 1.5% ahead, and the AMD Radeon RX 5700 scores 22170, 1.7% behind. Any of these GPUs would produce near-identical frame rates in Inside, because the game’s rendering load is modest and all of these cards vastly exceed its requirements.

The practical implication is that swapping the CPU or GPU for any of these near-equal alternatives would not change the playability verdict. All would still run Inside at Ultra settings with frame rates far above 60 FPS at every resolution tested.

The Verdict

The Intel Core i5-10400F and AMD Radeon RX 7700 XT can run Inside with no reservations. The verdict data marks every resolution and every preset as playable. At 3840x2160, the best playable setting is Ultra with an average of 83 FPS. At 2560x1440, Ultra averages 132 FPS. At 1920x1080, Ultra averages 176 FPS.

This is a system that never approaches the 60 FPS threshold. The lowest average recorded across the entire test matrix is 83 FPS at 4K Ultra, which is still 23 FPS above the playability cutoff. The minimum frame times recorded at Medium settings, which are the only settings with min/max data, are 119 FPS at 4K, 164 FPS at 1440p, and 183 FPS at 1080p. The database shows no scenario where this hardware struggles with Inside.

For a game released in 2016, this combination provides an experience that is limited only by display refresh rate. Users with 60 Hz displays will see a locked maximum at every setting. Users with 144 Hz or higher refresh rate monitors can comfortably use Ultra at 1080p and 1440p, while 4K Ultra will hold above 83 FPS, which suits 60 Hz and many 75 Hz displays perfectly.

How This Combo Ranks

Among all 3716 tested combinations in the database for Inside, this specific pairing ranks 1973. This places it in the middle of the pack, which is interesting given the absolute performance levels observed. The rank reflects the wide range of hardware tested, including newer and more expensive combinations that also run this game at very high frame rates.

The 53rd percentile ranking means that 53% of tested combos perform at or below this level, while 47% perform above. Given that Inside is a lightweight puzzle platformer, the practical difference between the 1973rd ranked combo and a top-100 combo is likely invisible in actual gameplay, since both will exceed 60 FPS by a wide margin. The ranking is more a reflection of the CPU’s and GPU’s synthetic benchmark scores relative to other components in the database, rather than a meaningful indicator of gameplay quality for this title.

The data supports a clear conclusion: this system is overkill for Inside, and its mid-pack ranking does not change the fact that it delivers excellent, smooth performance at all settings and resolutions tested.