Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

18%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
196 FPS
Ultra 1080p Measured
96 FPS

1440p (2K / QHD)

Low 1440p Measured
143 FPS
Ultra 1440p Measured
68 FPS

4K (Ultra HD)

Low 4K Measured
90 FPS
Ultra 4K Measured
42 FPS
9.9ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 13,494
Graphics Card
Required 27,118
Your GPU 0

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Available

Your GPU supports ray tracing but may impact FPS.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 48 74 90
1440p QHD 68 73 114 143
1080p Full HD 96 101 158 196

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 101
1920x1080 Low 196
1920x1080 Medium 158
1920x1080 Ultra 96
2560x1440 High 73
2560x1440 Low 143
2560x1440 Medium 114
2560x1440 Ultra 68
3840x2160 High 48
3840x2160 Low 90
3840x2160 Medium 74
3840x2160 Ultra 42

Performance Analysis: Inside on Your System

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3050 4 GB delivers a playable experience in Inside across all tested resolutions, but the margin of safety varies sharply with resolution and preset. At 1920x1080, this combo is overwhelmingly powerful, holding an average of 95.9 FPS even at the Ultra preset. The data shows that 2560x1440 remains highly comfortable, with all four presets clearing the 60 FPS threshold, peaking at 142.5 FPS on Low. The only area of concern is 4K, where the Ultra preset drops to 42 FPS and High falls to 47.9 FPS, though Medium remains playable at 73.9 FPS. Benchmark results indicate this is a system where the GPU becomes the limiting factor only at the highest 4K settings, while the CPU's strong single-thread performance keeps frame rates high at lower resolutions.

Measured FPS Breakdown

The measured FPS data provides a clear picture of how this combo scales across resolutions and graphics presets. At 1920x1080, the frame rates are exceptionally high across the board. The Low preset delivers 195.6 FPS average, which is more than three times the playable threshold of 60 FPS. Moving to Medium, the average drops to 158 FPS, still a massive margin. High settings produce 100.6 FPS, and even the most demanding Ultra preset maintains a strong 95.9 FPS average. The scaling from Low to Ultra at 1080p shows a performance reduction of roughly 51%, but every setting remains far above the 60 FPS playable line.

At 2560x1440, the frame rates remain impressive but show the expected impact of higher pixel counts. Low settings deliver 142.5 FPS average, which is excellent for a 1440p experience. Medium follows at 114 FPS, High at 72.8 FPS, and Ultra at 68.1 FPS. The transition from 1080p to 1440p costs approximately 27% performance on Low settings, but the penalty is more pronounced on higher presets. For instance, High drops from 100.6 FPS at 1080p to 72.8 FPS at 1440p, a 28% reduction, while Ultra drops from 95.9 FPS to 68.1 FPS, a 29% reduction. Even with these losses, all four presets at 1440p clear the 60 FPS threshold comfortably.

The 3840x2160 results reveal the first signs of strain. Low settings still produce a very playable 90.3 FPS average, and Medium maintains 73.9 FPS. However, High falls to 47.9 FPS, below the 60 FPS playable line, and Ultra drops further to 42 FPS. The scaling from 1440p to 4K is steep: Low goes from 142.5 FPS to 90.3 FPS (a 37% drop), Medium from 114 FPS to 73.9 FPS (a 35% drop), High from 72.8 FPS to 47.9 FPS (a 34% drop), and Ultra from 68.1 FPS to 42 FPS (a 38% drop). This pattern indicates that the GPU's 4 GB memory and bandwidth constraints become critical at 4K with higher presets.

It is also worth remembering the minimum and maximum FPS values are not recorded in the data, so the analysis relies entirely on average FPS. The consistency between presets and resolutions, however, suggests that the gameplay experience is stable, with no sudden dips expected based on the average figures alone.

Best Settings per Resolution

For 1920x1080, the best settings are Ultra, which produces an average of 95.9 FPS. This is the most demanding preset available, and it stays well above the 60 FPS playable threshold, making it the clear recommendation for players with 1080p monitors. There is no reason to compromise on visual quality at this resolution, as even Ultra leaves a 36 FPS headroom above the playable line.

At 2560x1440, the best settings are also Ultra, with an average of 68.1 FPS. While this is closer to the 60 FPS threshold than at 1080p, it still clears the line by 8.1 FPS. The data shows that Ultra at 1440p is playable, though players who prefer a larger safety margin might consider High at 72.8 FPS, which offers a 12.8 FPS buffer. The verdict, however, designates Ultra as the best settings because it remains above 60 FPS.

For 3840x2160, the best settings are Medium, which delivers an average of 73.9 FPS. High and Ultra both fall below the playable threshold at 47.9 FPS and 42 FPS respectively, so they are not viable options for a smooth experience. Low is playable at 90.3 FPS, but Medium provides a better visual quality while still maintaining a 13.9 FPS margin above the threshold. The verdict confirms Medium as the best 4K setting for this combo.

CPU and GPU Roles

The benchmark data reveals how the CPU and GPU split their responsibilities across resolutions and presets. At 1920x1080, the frame rates are so high that the CPU's single-thread performance, as indicated by a Passmark single-thread score of 3444 and a 3DMark single-thread score of 893, is likely the primary driver. The GPU, despite being a capable Ampere chip with 2048 shading units, has ample headroom at this resolution, as evidenced by the 195.6 FPS on Low settings. The scaling from Low to Ultra at 1080p (195.6 FPS to 95.9 FPS) is a 51% reduction, which is typical of GPU-bound workloads, but the absolute numbers suggest neither component is a bottleneck at this resolution.

At 2560x1440, the GPU begins to take on a more significant role. The performance drop from 1080p to 1440p ranges from 27% on Low to 29% on Ultra, indicating that the increased pixel count is taxing the GPU's memory bandwidth of 192.0 GB/s and its 128-bit bus. The CPU's 4 cores and 8 threads, with a boost clock of 4.30 GHz, are still sufficient to feed the GPU, as the frame rates remain high across all presets. The data shows that the GPU is the limiting factor at 1440p, particularly on Ultra where the 68.1 FPS average reflects the GPU's workload rather than any CPU constraint.

At 3840x2160, the GPU is unequivocally the bottleneck. The 4 GB of GDDR6 memory and the 192.0 GB/s bandwidth are insufficient for the highest presets at this resolution, as shown by the 42 FPS on Ultra and 47.9 FPS on High. The CPU's performance, however, remains more than adequate, as even the lowest 4K result (42 FPS) is far below what the CPU is capable of delivering. The scaling from 1440p to 4K shows a 34-38% drop across all presets, which is consistent with a GPU-bound scenario. The CPU's role at 4K is minimal, as the GPU is clearly the limiting factor.

The data also indicates that the CPU's multi-threaded performance, with a Cinebench R23 multi-core score of 11860 and a Passmark multi-thread score of 14015, is more than sufficient for a puzzle platformer like Inside. The game's genre does not demand high thread counts, so the 4-core/8-thread configuration is not a hindrance. The GPU's role grows with resolution, and at 4K, the 4 GB memory capacity becomes the critical constraint.

The Verdict

This PC can run Inside at 60 FPS or higher in most configurations, with the verdict clearly indicating which settings are playable at each resolution. At 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with the best being Ultra at 95.9 FPS. The 60 FPS threshold is cleared by a wide margin, making 1080p a non-issue for this combo.

At 2560x1440, the verdict lists all four presets as playable, with Ultra at 68.1 FPS as the best option. Even the most demanding preset stays above the 60 FPS line, though the margin is narrower. Players with 1440p monitors can enjoy the game at maximum settings without concern.

At 3840x2160, the situation is more nuanced. The verdict identifies Low and Medium as playable, with Medium at 73.9 FPS being the best setting. High and Ultra are not playable, as they fall to 47.9 FPS and 42 FPS respectively. For 4K players, the recommendation is to stick with Medium for a smooth experience, as the GPU's 4 GB memory is insufficient for higher presets.

Overall, this combo is well-suited for Inside at 1080p and 1440p, and it can handle 4K with adjusted settings. The GPU is the limiting factor at higher resolutions and presets, but the CPU provides ample headroom throughout.

FAQ

*Q: Can this PC run Inside at 1080p with Ultra settings?*

A: Yes, the measured average FPS at 1920x1080 with Ultra settings is 95.9 FPS, which is well above the 60 FPS playable threshold.

Q: What is the best setting for 4K on this system?

A: The best 4K setting is Medium, which achieves an average of 73.9 FPS. High and Ultra fall below 60 FPS at 47.9 and 42 FPS respectively.

Q: Is the CPU or GPU more important for this game at 1440p?

A: At 2560x1440, the GPU becomes the more important component, as the frame rate drops by 27-29% compared to 1080p across all presets, indicating GPU-bound scaling.

Q: Does the 4 GB VRAM limit performance at 4K?

A: The data shows that High and Ultra presets at 3840x2160 produce averages of 47.9 FPS and 42 FPS, below the 60 FPS threshold, which suggests the 4 GB memory capacity is a limiting factor at 4K.

Q: What is the highest playable setting at 1440p?

A: Ultra is playable at 2560x1440 with an average of 68.1 FPS, making it the highest preset that stays above the 60 FPS line.

*Q: How does this combo rank among all tested systems for Inside?*

A: This combo ranks 3237 out of 3716 tested combos, placing it in the lower 13th percentile of all systems tested for this game.

How This Combo Ranks

The combo of the Intel Core i3-12100F and the NVIDIA GeForce RTX 3050 4 GB ranks 3237 out of 3716 tested combinations for Inside. This places it in the bottom 13% of all systems in the database, which is a notable contrast to its strong in-game performance at 1080p and 1440p. The ranking reflects the absolute performance ceiling of the combo, where the 4 GB GPU memory and modest CPU thread count limit its standing relative to higher-end configurations. However, the measured FPS data shows that this rank does not translate into a poor experience for this specific game, as Inside is not particularly demanding. The CPU's nearest rivals—such as the Intel Core 3 N355 with an average score of 13492 and the Intel Core i5-9500 at 13452—are nearly identical in benchmark performance, with deltaPct values of 0% and 0.3% respectively. This indicates that the i3-12100F is competitive with older mid-range processors, though its 4-core/8-thread design is a limiting factor in multi-threaded workloads. The GPU, with a percentile rank of 50 among all GPUs, is representative of a mid-range card, and its 4 GB memory capacity is a key reason the combo ranks lower than systems with 8 GB or more VRAM. For players targeting 1080p or 1440p, the rank should not deter them, as the data shows this combo exceeds the playable threshold at those resolutions with ease.