Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
434 FPS
Ultra 1080p Measured
329 FPS

1440p (2K / QHD)

Low 1440p Measured
389 FPS
Ultra 1440p Measured
243 FPS

4K (Ultra HD)

Low 4K Measured
321 FPS
Ultra 4K Measured
153 FPS
3ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 75,779
Graphics Card
Required 27,118
Your GPU 77,712

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 153 160 256 321
1440p QHD 243 255 359 389
1080p Full HD 329 334 401 434

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 334
1920x1080 Low 434
1920x1080 Medium 401
1920x1080 Ultra 329
2560x1440 High 255
2560x1440 Low 389
2560x1440 Medium 359
2560x1440 Ultra 243
3840x2160 High 160
3840x2160 Low 321
3840x2160 Medium 256
3840x2160 Ultra 153

Performance Analysis: Inside on Your System

The AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5090 D combination delivers an extraordinary performance margin in Inside, clearing 150 FPS at 4K Ultra and exceeding 320 FPS at 1080p Ultra. The data shows this is a top-tier pairing for the game, ranking 5th out of 3,716 tested combos, with every resolution and preset tested landing far above the 60 FPS playability threshold. This system does not merely run Inside; it overwhelms it, leaving substantial headroom for high-refresh-rate displays at any resolution.

Similar Performance Alternatives

The nearestRivals data provides useful context for what other hardware would deliver near-identical frame rates in this configuration. For the CPU, the AMD Ryzen 9 9950X3D holds an average benchmark score of 75,779, placing it in the 95th percentile of all CPUs. Its closest competitor is the AMD Ryzen 7 PRO 9755, which scores 75,738 — a delta of just 0.1%. The AMD Ryzen 7 PRO 9755X3D also matches at 75,716 (0.1% delta), and the AMD EPYC 8224P trails by 0.3% with a score of 75,582. The Intel Core Ultra 9 285 sits 0.4% behind at 75,488. These sub-0.5% differences mean that swapping the 9950X3D for any of these four processors would produce imperceptible changes in Inside's frame rate, as the game is not CPU-bound at any tested setting.

On the GPU side, the RTX 5090 D posts an average benchmark score of 77,712, ranking in the 92nd percentile of all GPUs. The nearest rival is the AMD Radeon RX 6650M XT with a score of 76,904, which is 1.1% lower. Interestingly, three rivals score higher than the 5090 D: the AMD Radeon RX 6850M XT at 78,940 (1.6% faster), the NVIDIA Tesla P100 PCIe 12 GB at 79,396 (2.1% faster), and the NVIDIA Tesla P100 PCIe 16 GB at 79,605 (2.4% faster). These deltas are small enough that in Inside's measured FPS, the practical difference would be a handful of frames at most. The Tesla P100s are datacenter parts, but their benchmark scores indicate they would produce similar GPU-bound performance in this title. For a gamer building around this CPU, any of the four rival GPUs would yield comparable results in Inside — the game's modest graphical demands mean even the RX 6650M XT, a mobile-class part, would likely stay well above 60 FPS at 4K.

CPU and GPU Roles

The measured FPS data reveals that the GPU is the primary performance driver in Inside, with CPU influence being negligible. This is evident from the scaling pattern across resolutions. At 1920x1080 Medium, the system produces 401 FPS (minimum 341, maximum 461). At 2560x1440 Medium, it drops to 359 FPS (minimum 305, maximum 413). At 3840x2160 Medium, it falls to 256 FPS (minimum 218, maximum 295). This represents a 36% reduction from 1080p to 4K at Medium settings — a classic GPU-bound scaling curve where frame rate drops as pixel count increases.

The preset scaling further confirms GPU dominance. At 4K, moving from Low to High reduces average FPS from 321 to 160 — a 50% drop. At 1440p, Low produces 389 FPS while High yields 255 FPS (34% reduction). At 1080p, Low gives 434 FPS and High gives 334 FPS (23% reduction). The fact that higher resolutions amplify the preset penalty is a clear sign that the RTX 5090 D's fill rate and memory bandwidth are the limiting factors, not the CPU. The Ryzen 9 9950X3D, with its 16 cores and 32 threads, never becomes a bottleneck — its 3DMark max-threads score of 17,184 and Cinebench R23 multi-core score of 42,018 are far beyond what Inside's single-threaded physics and logic demand.

The CPU's role is therefore to provide a stable platform that does not interfere with the GPU's output. At 1080p Ultra, the system hits 329 FPS, and at 1440p Ultra it reaches 243 FPS — both figures are high enough that even a much weaker CPU would likely keep up. However, the 9950X3D's strong single-thread performance (Geekbench single-core score of 3,064, PassMark single-thread score of 4,737) ensures that no frame pacing issues emerge even at 434 FPS on Low settings at 1080p. The data indicates that if you dropped to a lesser CPU while keeping the 5090 D, you would see minimal FPS changes in Inside; conversely, keeping the 9950X3D but using the RX 6650M XT-class GPU would produce large FPS losses, confirming the GPU as the dominant component.

How This Combo Ranks

This specific pairing of AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5090 D ranks 5th out of 3,716 tested combinations in Inside. This is a remarkable position, placing it in the top 0.13% of all configurations tested. The rank reflects the combination's ability to sustain extremely high frame rates across all resolutions — the measured data shows no single preset or resolution dipping below 153 FPS, which is the lowest recorded value (4K Ultra). The 3,716-combo pool includes many weaker pairings, so a rank of 5 indicates that only four other systems (likely with higher-clocked or specially-tuned variants of top-tier hardware) outperform it.

The combo's percentile standing is consistent with its component-level scores: the CPU sits in the 95th percentile of all CPUs, and the GPU in the 92nd percentile of all GPUs. However, the combo rank of 5 is disproportionately high relative to those percentiles, which suggests that Inside's light workload allows the RTX 5090 D's raw throughput (104.8 TFLOPS FP32, 1.79 TB/s memory bandwidth) to shine without being held back by any CPU limitation. In many other games, a 92nd-percentile GPU might produce a combo rank closer to 100th or 200th, but here the game's modest requirements amplify the GPU's absolute performance. The 5th-place rank also indicates that the top 4 combos likely feature the same or similar flagship GPUs with slightly faster CPUs (e.g., a higher-binned 9950X3D or an overclocked variant), but the delta in real-world FPS would be negligible — all five systems are essentially saturating the game's engine limits.

The Verdict

The verdict data is unambiguous: this PC runs Inside flawlessly at every resolution and preset tested. At 3840x2160, all four settings (Low, Medium, High, Ultra) are marked as playable, with the best setting being Ultra at an average of 153 FPS. At 2560x1440, all settings are again playable, with Ultra averaging 243 FPS. At 1920x1080, all settings are playable, with Ultra averaging 329 FPS. The playable threshold is 60 FPS, and the lowest measured average across the entire dataset is 153 FPS (4K Ultra) — meaning the system has a minimum 2.5x margin over the threshold at its most demanding configuration.

For practical purposes, this means there is no scenario where the system fails to hit 60 FPS. Even the minimum FPS values recorded (218 FPS at 4K Medium, 305 FPS at 1440p Medium, 341 FPS at 1080p Medium) are all far above the threshold. The RTX 5090 D's 32 GB of GDDR7 memory and 512-bit bus provide more than enough bandwidth for Inside's 2D-style rendering, which does not stress modern GPU features like ray tracing or DLSS. The CPU's 128 MB of L3 cache and 16 cores are similarly overkill for this 2016 puzzle platformer. The only caveat — if one can call it that — is that the system is so fast that it may expose frame timing inconsistencies on standard 60 Hz displays, but that is a display limitation, not a hardware one.

FAQ

Q: What is the highest preset that maintains 60 FPS at 4K?

A: Ultra runs at an average of 153 FPS at 3840x2160, which is well above the 60 FPS threshold. All presets — Low (321 FPS), Medium (256 FPS), High (160 FPS), and Ultra (153 FPS) — exceed 60 FPS at 4K.

Q: How does this combo compare to the 5th-ranked position in the database?

A: The combo ranks 5th out of 3,716 tested combinations in Inside. This means 3,711 other systems produce lower frame rates, and only 4 produce higher ones. The CPU's 95th percentile and GPU's 92nd percentile scores contribute to this high rank, but the game's light load amplifies the GPU's absolute performance.

Q: Is the CPU or GPU more important for this game at 1440p?

A: The GPU is decisively more important. At 2560x1440, frame rates scale from 389 FPS on Low to 243 FPS on Ultra — a 38% drop — demonstrating GPU-bound behavior. The CPU's single-thread score (Geekbench 3,064) is sufficient to avoid any bottleneck, but reducing GPU power would cut FPS far more than reducing CPU power.

Q: What are the closest performance rivals to the RTX 5090 D in this system?

A: The AMD Radeon RX 6850M XT scores 1.6% higher on average benchmarks, while the NVIDIA Tesla P100 PCIe 16 GB scores 2.4% higher. The AMD Radeon RX 6650M XT scores 1.1% lower. These differences would translate to minor FPS variations in Inside, likely under 10 frames at any resolution.

Q: Does the system ever dip below 60 FPS in any tested configuration?

A: No. The lowest average FPS recorded is 153 at 4K Ultra, and the lowest minimum FPS recorded is 218 at 4K Medium. Every data point in the measuredFps array exceeds the 60 FPS playable threshold by at least 2.5x.

Q: What is the best setting for a 1440p 240 Hz monitor?

A: Ultra at 2560x1440 averages 243 FPS, which exceeds a 240 Hz refresh rate. If you prefer higher frame rates, High produces 255 FPS and Medium produces 359 FPS (with a minimum of 305 FPS), both also clearing 240 Hz.

Best Settings per Resolution

The most demanding preset that stays at or above 60 FPS is Ultra at every resolution, because all presets exceed 60 FPS. The data shows no preset drops below 153 FPS, so the "best" setting is always the highest visual quality.

At 3840x2160, the best setting is Ultra with an average of 153 FPS. This is the most visually demanding configuration and it still delivers 2.5x the playable threshold. If you prefer maximum smoothness, Low runs at 321 FPS, but Ultra's 153 FPS is already sufficient for 144 Hz displays.

At 2560x1440, the best setting is Ultra with an average of 243 FPS. This clears 240 Hz, making it ideal for high-refresh monitors. Medium runs at 359 FPS (minimum 305) for users who want extra headroom, but Ultra's 243 FPS is already well above 60 FPS and even above most gaming displays' refresh rates.

At 1920x1080, the best setting is Ultra with an average of 329 FPS. This is the highest frame rate achieved at Ultra across all resolutions, and it comfortably exceeds 300 FPS, making it suitable for esports-grade 360 Hz displays. Low runs at 434 FPS, but Ultra's 329 FPS is the recommended choice because it provides the best visual quality without any playability concerns.