Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

90%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
297 FPS
Ultra 1080p Measured
141 FPS

1440p (2K / QHD)

Low 1440p Measured
213 FPS
Ultra 1440p Measured
102 FPS

4K (Ultra HD)

Low 4K Measured
134 FPS
Ultra 4K Measured
64 FPS
6.8ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 76,212
Graphics Card
Required 27,118
Your GPU 22,729

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 64 67 107 134
1440p QHD 102 107 171 213
1080p Full HD 141 148 237 297

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 148
1920x1080 Low 297
1920x1080 Medium 237
1920x1080 Ultra 141
2560x1440 High 107
2560x1440 Low 213
2560x1440 Medium 171
2560x1440 Ultra 102
3840x2160 High 67
3840x2160 Low 134
3840x2160 Medium 107
3840x2160 Ultra 64

Performance Analysis: Inside on Your System

Inside is a puzzle platformer with modest visual demands, and the measured data shows the AMD Ryzen 9 8945HX plus NVIDIA GeForce RTX 4060 Mobile combination handles it with remarkable ease across all tested resolutions and presets. The benchmark results place this combo at rank 2237 out of 3716 tested configurations, meaning it sits comfortably above the median for this title, and every single preset tested—from Low to Ultra—exceeds the 60 FPS playable threshold at 1080p, 1440p, and even 4K. The data is measured, not estimated, so these framerates reflect actual runtime behavior rather than projections.

Measured FPS Breakdown

At 1920x1080, the RTX 4060 Mobile paired with the Ryzen 9 8945HX delivers framerates that are almost excessive for a puzzle platformer. On Low settings, the average FPS reaches 297, which is so high that the display refresh rate becomes the limiting factor rather than the hardware. Moving to Medium settings, the average drops to 237 FPS, with a minimum of 202 and a maximum of 273, indicating tight frame pacing even under load. High settings produce an average of 148 FPS, while Ultra settings still hold an average of 141 FPS. The gap between Low and Ultra is roughly a 52% reduction in average framerate, but even the most demanding preset at 1080p leaves more than double the headroom needed for the 60 FPS target.

Stepping up to 2560x1440, the performance remains exceptionally strong. Low settings average 213 FPS, which is still far beyond what any standard 60 Hz or even 144 Hz monitor can display. Medium settings average 171 FPS, with a minimum of 145 and a maximum of 196, showing that the GPU begins to work harder but still never approaches a concerning level. High settings average 107 FPS, and Ultra settings average 102 FPS. The scaling from 1080p to 1440p is roughly linear in terms of pixel count, yet the Ultra preset only loses about 28% of its average framerate, from 141 to 102 FPS. This suggests the game is not heavily GPU-bound at these settings, or that the RTX 4060 Mobile has ample compute headroom.

At 3840x2160, the RTX 4060 Mobile finally starts to feel some pressure, though it still clears the 60 FPS bar everywhere. Low settings average 134 FPS, Medium averages 107 FPS with a minimum of 91 and maximum of 123, High averages 67 FPS, and Ultra averages 64 FPS. The drop from Medium to High is substantial—from 107 to 67 FPS, a 37% reduction—while the difference between High and Ultra is only 3 FPS. This indicates that the High preset introduces a significant rendering cost that Ultra barely extends further. The minimum FPS of 91 on Medium is particularly notable, as it shows the system can sustain smooth gameplay even in demanding scenes. At 4K Ultra, the 64 FPS average is just barely above the playable threshold, so there is minimal margin for unexpected dips.

Similar Performance Alternatives

The CPU benchmarks place the AMD Ryzen 9 8945HX among top-tier processors, with an average benchmark score of 76212 and a percentile ranking of 95 against all CPUs. Its nearest rivals are all high-end desktop or mobile parts: the Intel Core Ultra 9 285HX scores 76155 (a 0.1% difference), the AMD EPYC Embedded 8224P scores 76492 (0.4% higher), the AMD Ryzen Threadripper PRO 9945WX scores 76513 (0.4% higher), and the AMD Ryzen 9 9950X3D scores 75779 (0.6% lower). These deltas are all within a fraction of a percent, meaning that for Inside, swapping to any of these CPUs would produce virtually identical framerates. The game’s engine is not CPU-bound in any meaningful way, so even a significantly slower processor would likely not change the measured FPS at high resolutions.

On the GPU side, the NVIDIA GeForce RTX 4060 Mobile has an average benchmark score of 22729 and sits at the 67th percentile of all GPUs. Its nearest rivals are a mix of desktop and mobile parts: the NVIDIA GeForce RTX 2080 scores 22895 (0.7% higher), the AMD Radeon RX 7700 XT scores 22549 (0.8% lower), the Intel Arc B580 scores 23021 (1.3% higher), and the NVIDIA GeForce RTX 5060 Mobile scores 22435 (1.3% lower). The performance deltas here are small, but they matter more than the CPU side because Inside’s framerate does scale with GPU capability, especially at 4K. For example, the Intel Arc B580’s 1.3% higher score would translate to roughly 1 FPS more at 4K Ultra (from 64 to about 65 FPS), which is imperceptible. The RTX 2080, being a desktop card, might have better sustained performance in a laptop chassis, but the measured data shows the RTX 4060 Mobile is already sufficient.

CPU and GPU Roles

The data reveals that the GPU is the primary driver of framerate scaling in Inside, while the CPU’s role is mostly incidental. Comparing the 1080p Low preset (297 FPS) to the 4K Low preset (134 FPS), the framerate drops by 55% as resolution increases, which is a clear sign of GPU-bound behavior. The CPU’s single-thread and multi-thread scores (6030 in Cinebench R23 single-core, 42713 in multi-core) are far beyond what Inside requires, and the game’s simple geometry and physics do not stress the 16-core Zen 4 architecture. At 1080p, the CPU is likely capable of feeding frames faster than the GPU can render them, but the measured FPS of 297 on Low suggests there is no practical bottleneck.

The preset scaling further confirms the GPU’s dominance. At 1440p, moving from Low (213 FPS) to Ultra (102 FPS) reduces performance by 52%, while the CPU load from higher settings is minimal. At 4K, the scaling is even steeper: Low (134 FPS) to Ultra (64 FPS) is a 52% reduction as well, but the absolute numbers show the GPU is approaching its limits. The Ryzen 9 8945HX’s 32 threads and high boost clock of 5.40 GHz ensure that frame pacing stays consistent, as evidenced by the minimum FPS values on Medium settings (91 FPS at 4K, 145 FPS at 1440p, 202 FPS at 1080p) being well above the 60 FPS threshold. In essence, the CPU provides a rock-solid foundation, but it is the RTX 4060 Mobile that dictates whether the game runs at 60 or 300 FPS.

The Verdict

Yes, this PC can run Inside, and it does so with authority at every resolution and preset tested. The verdict by resolution is unambiguous: at 3840x2160, all four settings—Low, Medium, High, and Ultra—are playable, with the best preset being Ultra at an average of 64 FPS. At 2560x1440, Ultra also qualifies as the best setting, averaging 102 FPS, which leaves substantial headroom for demanding scenes. At 1920x1080, Ultra averages 141 FPS, making it not only playable but also suitable for high-refresh-rate displays. The playable threshold is defined as 60 FPS, and every single measured configuration clears it, even the most demanding 4K Ultra preset which averages 64 FPS. The only caveat is that 4K Ultra sits close to the threshold, so if the game has any unmeasured stutter-prone areas, a drop to High (67 FPS) would provide a safer margin. For all practical purposes, this hardware is overkill for Inside.

FAQ

Q: Can the AMD Ryzen 9 8945HX and RTX 4060 Mobile run Inside at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 Ultra is 64 FPS, which is above the 60 FPS playable threshold. This is the most demanding preset tested, and it still clears the bar.

Q: What is the difference in performance between High and Ultra settings at 1440p?

A: At 2560x1440, High averages 107 FPS while Ultra averages 102 FPS, a difference of only 5 FPS. The visual gains from Ultra are likely minimal for a game like Inside, so either setting is viable.

Q: How does the RTX 4060 Mobile compare to the RTX 2080 in this game?

A: The RTX 4060 Mobile has an average benchmark score of 22729, while the RTX 2080 scores 22895, a 0.7% difference. In Inside, this translates to roughly 1 FPS at most, so the performance is effectively identical.

Q: Is the CPU a bottleneck at 1080p with Low settings?

A: No. The CPU’s Cinebench R23 multi-core score is 42713 and single-core score is 6030, both far above what Inside needs. The measured 297 FPS average at 1080p Low indicates the GPU is still the limiting factor, not the CPU.

Q: What is the minimum FPS recorded across all tests?

A: The lowest minimum FPS in the data is 91 FPS, recorded at 3840x2160 with Medium settings. This is still 31 FPS above the playable threshold, showing consistent frame delivery.

Q: Should I lower settings from Ultra to High at 4K to be safer?

A: At 4K Ultra, the average is 64 FPS, only 4 FPS above the threshold. Dropping to High yields 67 FPS, which provides a slightly larger buffer. If you prefer a guaranteed smooth experience, High is the safer choice, but Ultra is technically playable.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average FPS of 64. This is the maximum visual quality available, and it still clears the threshold, though the margin is slim. If you want more headroom, High averages 67 FPS, but the data confirms Ultra is playable.

At 2560x1440, Ultra is the best setting, averaging 102 FPS. This leaves a 42 FPS buffer above the 60 FPS threshold, so there is no practical reason to drop below Ultra unless you have a high-refresh-rate monitor and want to push beyond 100 FPS consistently.

At 1920x1080, Ultra averages 141 FPS, making it the clear choice. This is more than double the playable threshold and suitable for 120 Hz or 144 Hz displays. The performance is so high that even the most demanding preset is trivial for this hardware, and no settings adjustment is needed to achieve a smooth experience.