Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
309 FPS
Ultra 1080p Measured
147 FPS

1440p (2K / QHD)

Low 1440p Measured
222 FPS
Ultra 1440p Measured
106 FPS

4K (Ultra HD)

Low 4K Measured
140 FPS
Ultra 4K Measured
66 FPS
6.5ms Frame Time
10ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 53,288
Graphics Card
Required 27,118
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 66 70 112 140
1440p QHD 106 111 178 222
1080p Full HD 147 155 247 309

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 155
1920x1080 Low 309
1920x1080 Medium 247
1920x1080 Ultra 147
2560x1440 High 111
2560x1440 Low 222
2560x1440 Medium 178
2560x1440 Ultra 106
3840x2160 High 70
3840x2160 Low 140
3840x2160 Medium 112
3840x2160 Ultra 66

Performance Analysis: Inside on Your System

The AMD Ryzen 9 7900X paired with the AMD Radeon RX 9060 delivers a remarkably strong performance profile for Inside, a puzzle platformer with modest graphical demands. The measured data shows this combination not only meets but vastly exceeds the 60 FPS playability threshold at every tested resolution and preset, with average frame rates ranging from a low of 66 FPS at 4K Ultra to a high of 309 FPS at 1080p Low. This suggests the hardware is heavily overqualified for the game, leaving significant headroom for future titles or higher refresh rate displays.

Measured FPS Breakdown

The benchmark data provides a clear picture of performance scaling across three resolutions and four quality presets. At 1920x1080, the combo produces exceptional frame rates: Low settings yield an average of 309 FPS, Medium drops to 247 FPS (with a minimum of 210 FPS and maximum of 284 FPS), High achieves 155 FPS, and Ultra maintains 147 FPS. These numbers indicate that at 1080p, the system is almost certainly bottlenecked by the CPU or game engine logic rather than the GPU, as the jump from Low to Ultra only reduces performance by approximately 52%.

Moving to 2560x1440, the frame rates remain extraordinarily high but show a more pronounced GPU influence. Low settings produce 222 FPS, Medium averages 178 FPS (with a 151 FPS minimum and 204 FPS maximum), High reaches 111 FPS, and Ultra delivers 106 FPS. The scaling from Ultra to Low represents a 109% performance increase, suggesting the RX 9060's 8 GB GDDR6 memory and 128-bit bus are still not fully stressed at this resolution.

At 3840x2160, the GPU finally begins to show its limits, though results remain stellar. Low settings average 140 FPS, Medium comes in at 112 FPS (with a 95 FPS minimum and 128 FPS maximum), High produces 70 FPS, and Ultra drops to 66 FPS. The minimum recorded frame rate of 95 FPS at 4K Medium is still comfortably above the 60 FPS threshold, indicating no stutter or frame pacing issues even in demanding scenes.

Notably, the data omits minimum and maximum values for High and Ultra presets across all resolutions, as well as for Low settings. This limits granular analysis of frame time consistency at the highest quality levels, but the available averages suggest a stable experience. The 4K Ultra result of 66 FPS is the only measurement that falls within striking distance of the 60 FPS threshold, yet it still clears it with a small margin.

FAQ

Q: Can this system run Inside at 4K with all settings maxed out?

A: Yes. The measured average frame rate at 3840x2160 with Ultra settings is 66 FPS, which exceeds the 60 FPS playability threshold by 10%. The verdict data confirms Ultra is listed as a playable setting at this resolution.

Q: What is the highest average frame rate achievable with this combo?

A: The fastest measured result is 309 FPS at 1920x1080 with Low settings. This is more than five times the 60 FPS threshold and indicates the game is heavily CPU-bound at this resolution and preset.

Q: How does performance scale when moving from 1080p to 4K at the same settings?

A: At Ultra settings, the average frame rate drops from 147 FPS at 1080p to 106 FPS at 1440p, then to 66 FPS at 4K. This represents a 55% reduction from 1080p to 4K, demonstrating a predictable GPU-bound scaling curve.

Q: Are there any settings where the frame rate dips below 60 FPS?

A: No. The lowest recorded average is 66 FPS at 4K Ultra, and the lowest minimum frame rate measured is 95 FPS at 4K Medium. All tested configurations remain above the playability threshold.

Q: Does the 8 GB VRAM on the RX 9060 cause any issues at 4K?

A: Based on the measured data, there are no performance collapses or abnormal frame rate drops that would indicate VRAM capacity problems. The 4K Ultra average of 66 FPS and 4K Medium minimum of 95 FPS suggest the memory configuration is sufficient for this title.

Q: How does this combo compare to other tested systems for Inside?

A: The combination ranks 2129th out of 3716 tested combos. While this places it in the lower-middle portion of the database, the rank is heavily influenced by the inclusion of much weaker hardware; the absolute FPS numbers show this system is overwhelmingly capable for this specific game.

How This Combo Ranks

The comboRankInGame places this specific CPU-GPU pairing at position 2129 out of 3716 tested combinations, which corresponds to roughly the 43rd percentile. This rank might seem unimpressive at first glance, but context is critical. The database includes systems ranging from entry-level integrated graphics to flagship multi-GPU setups, and Inside is an older title from 2016 that many modern high-end systems can run at extremely high frame rates.

What this rank actually reveals is that the Ryzen 9 7900X and RX 9060 combination sits in the middle of the pack for this game, despite producing frame rates that are objectively excellent. The explanation lies in the nature of the game: Inside is a puzzle platformer with simple geometry and limited draw distances, so even mid-range hardware from the past several years can achieve 100+ FPS. The 2129th rank likely reflects that many budget and older systems also perform well here, compressing the performance spread.

The CPU's percentileVsAllCpus of 91 indicates it outperforms 91% of all CPUs in the database on average benchmark scores. Similarly, the GPU's percentileVsAllGpus of 59 shows it beats 59% of all GPUs. The combination of a top-tier CPU with a mid-range GPU creates a system that is heavily CPU-overqualified for Inside, which explains why frame rates remain so high even at lower resolutions where GPU load is minimal.

The Verdict

This system can absolutely run Inside, and the data shows it does so with extraordinary headroom. The verdictByResolution data confirms that all four settings presets—Low, Medium, High, and Ultra—are playable at every tested resolution, with the 60 FPS threshold cleared in all twelve measured configurations.

At 3840x2160, the best playable setting is Ultra with an average of 66 FPS. This is the most demanding scenario in the entire test suite, and it still succeeds. For users with 4K displays, there is no need to compromise on visual quality. At 2560x1440, Ultra settings deliver 106 FPS, providing a smooth experience on high refresh rate monitors up to 100 Hz. The 1080p Ultra result of 147 FPS opens the door for 144 Hz displays, though users with 240 Hz panels might consider High settings at 155 FPS or Medium at 247 FPS for maximum fluidity.

The only caveat is the absence of minimum FPS data for Ultra presets, which prevents verification of frame time consistency at the highest quality settings. However, the available minimums at Medium (95 FPS at 4K, 151 FPS at 1440p, 210 FPS at 1080p) suggest that even the lowest dips remain far above the playability threshold.

Similar Performance Alternatives

For the AMD Ryzen 9 7900X, the nearest rivals in the benchmark database provide insight into comparable CPU performance. The AMD EPYC 7313P scores 0.2% higher on average benchmarks, making it virtually identical in performance. The Intel Xeon Phi 7290 is 0.3% slower, while the Intel Xeon 634 comes in 0.6% faster. The Intel Core i7-14700F is 0.6% slower than the 7900X. These deltas are all within a fraction of a percent, meaning any of these CPUs would deliver indistinguishable frame rates in Inside.

On the GPU side, the AMD Radeon RX 9060 finds its closest match in the NVIDIA GeForce RTX 3060 Ti, which scores 0.7% higher in average benchmarks. The AMD Radeon R9 370X and AMD Radeon RX 7700 both score 1% lower, while the AMD Radeon Pro W5500 trails by 2.1%. For Inside specifically, these differences would translate to at most 1-2 FPS variation, which is imperceptible in practice.

Users considering alternative builds could swap the 7900X for any of these CPUs or the RX 9060 for any of these GPUs and expect near-identical performance in this game. The ranking data suggests that the system's overall position of 2129th would remain essentially unchanged with any of these substitutions.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains 60+ FPS is Ultra, which achieves an average of 66 FPS. This is the clear recommendation for 4K users who prioritize visual fidelity, as the 6 FPS headroom above the threshold provides a small safety margin. Users who prefer higher frame rates could drop to High for 70 FPS, though the gain is minimal.

For 2560x1440, Ultra remains the best choice with an average of 106 FPS. This provides ample headroom above 60 FPS and supports refresh rates up to 100 Hz. The 106 FPS average suggests that even demanding scenes will rarely dip below 90 FPS, making this an excellent balance of quality and performance.

At 1920x1080, Ultra settings deliver 147 FPS on average. This is the optimal configuration for 144 Hz monitors, as it exceeds that refresh rate by a small margin. For users with 240 Hz displays, dropping to High yields 155 FPS, while Medium offers 247 FPS for those who prioritize maximum smoothness over visual details. The 309 FPS result at Low is only relevant for competitive or experimental scenarios.

CPU and GPU Roles

The performance scaling across resolutions and presets reveals distinct roles for each component in this game. At 1920x1080, the CPU is clearly the dominant factor. The difference between Low (309 FPS) and Ultra (147 FPS) represents a 52% reduction, but even at Ultra, the frame rate is so high that the GPU is unlikely to be fully utilized. The Ryzen 9 7900X, with its 12 cores and 24 threads, provides immense single-thread performance that this 2016 game engine can leverage.

As resolution increases to 2560x1440, the GPU begins to assert more influence. The frame rate drops from 222 FPS at Low to 106 FPS at Ultra, a 52% reduction similar to 1080p. However, the absolute numbers are lower, indicating that the RX 9060 is starting to become a limiting factor. The GPU's 21.43 TFLOPS of FP32 performance and 288.0 GB/s memory bandwidth are sufficient, but the gap between Low and Ultra widens in relative terms.

At 3840x2160, the GPU becomes the primary bottleneck. The 140 FPS at Low versus 66 FPS at Ultra shows a 53% reduction, but the absolute frame rates are now much lower. The RX 9060's 8 GB VRAM and 128-bit memory bus are being stressed at this resolution, though the game's simple visuals prevent any catastrophic performance collapse. The CPU's role diminishes at 4K, as the frame rate is constrained by the GPU's pixel throughput of 191.4 GPixel/s and texture rate of 334.9 GTexel/s.

The data suggests that for Inside specifically, the Ryzen 9 7900X is overkill at all resolutions, while the RX 9060 is appropriately matched for 1080p and 1440p gaming but slightly underpowered for 4K Ultra—though still sufficient for this undemanding title. The 66 FPS result at 4K Ultra indicates the GPU is working near its limits, whereas the 309 FPS at 1080p Low shows the CPU has massive unused potential.