Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 84 | 89 | 143 | 177 |
| 1440p QHD | 136 | 144 | 229 | 284 |
| 1080p Full HD | 188 | 200 | 294 | 318 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 3070 Ti is an overwhelmingly capable combination for Inside, delivering frame rates that far exceed the 60 FPS playability threshold at every tested resolution and preset. The data shows that this system does not merely run the game; it dominates it, with even the most demanding 4K Ultra settings producing an average of 84.4 FPS, leaving substantial headroom for a locked 60 FPS experience on high-refresh-rate displays.
Measured FPS Breakdown
The measured FPS data for this combination reveals a consistent pattern of exceptional performance across all settings and resolutions. At 1920x1080, the lowest tested resolution, the system achieves an average of 317.6 FPS on Low settings, which scales down to 293.8 FPS on Medium, 200 FPS on High, and 188.1 FPS on Ultra. These numbers indicate that even at the highest preset, the frame rate remains nearly three times the playability threshold of 60 FPS. The performance gap between Low and Ultra at 1080p is substantial, with a 129.5 FPS difference, but the absolute values are so high that the distinction is largely academic for gameplay smoothness.
Moving to 2560x1440, the frame rates remain remarkably high. Low settings produce an average of 283.9 FPS, while Medium yields 229.1 FPS. High settings deliver 144.4 FPS, and Ultra settings still maintain a strong 135.8 FPS average. The scaling from 1080p to 1440p shows a predictable reduction in performance, with the Ultra preset dropping by 52.3 FPS, but the system retains a comfortable 75.8 FPS margin above the 60 FPS threshold even at the most demanding preset. The pattern across presets is consistent, with Low and Medium settings providing nearly double the frame rate of the High and Ultra presets.
At 3840x2160, the highest resolution tested, performance finally begins to show some strain, though it remains comfortably playable. Low settings achieve an average of 177.4 FPS, and Medium settings reach 142.9 FPS. High settings drop to 89.2 FPS, while Ultra settings produce an average of 84.4 FPS. This represents a substantial reduction from the 1080p results, with the Ultra preset seeing a 103.7 FPS decrease, but the minimum performance still clears the 60 FPS threshold by a margin of 24.4 FPS. The data indicates that 4K gaming is entirely viable, with even the most demanding settings maintaining frame rates that would satisfy most players.
CPU and GPU Roles
The benchmark data reveals a clear division of labor between the CPU and GPU at different resolutions. At 1920x1080, the system's frame rates are likely constrained by the GPU, though the Ryzen 9 5950X's 16 cores and 32 threads provide ample processing power for Inside's puzzle-platformer mechanics. The CPU’s 3dmark single-thread score of 944 and multi-thread score of 11597 suggest it is more than sufficient for this title, which is not known for heavy CPU demands. The 1080p results show the highest absolute frame rates, indicating that the GPU is operating near its full potential without being bottlenecked by the processor.
As resolution increases to 2560x1440, the GPU takes on a more significant role. The frame rate drops of 33.7 FPS for Low, 64.7 FPS for Medium, 55.6 FPS for High, and 52.3 FPS for Ultra compared to 1080p demonstrate that the RTX 3070 Ti is becoming the primary performance limiter. The CPU remains largely idle in comparison, as evidenced by the relatively small performance deltas between presets at this resolution. The 16-core processor's capabilities are not fully utilized, but its high single-thread performance ensures that no frame pacing issues arise from CPU limitations.
At 3840x2160, the GPU is unequivocally the dominant component. The frame rates drop by an additional 106.5 FPS for Low, 86.2 FPS for Medium, 55.2 FPS for High, and 51.4 FPS for Ultra compared to 1440p. This scaling pattern shows that the RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are being taxed heavily, while the CPU's role diminishes further. The data suggests that players seeking higher frame rates at 4K would need to adjust GPU settings rather than CPU settings, as the processor is not the limiting factor at any resolution.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU provide context for how other hardware would perform in this system. The AMD Ryzen 9 5950X has an average benchmark score of 51947, placing it in the 91st percentile of all CPUs. Its closest competitors include the Intel Core Ultra 5 235HX with an average score of 52073, a delta of -0.2%, and the AMD EPYC 8124P with a score of 52121, a delta of -0.3%. The Intel Core i9-13900F scores 51730, a delta of 0.4%, and the Intel Core i7-14700 scores 52301, a delta of -0.7%. These deltas are all under 1%, meaning that swapping the Ryzen 9 5950X for any of these alternatives would produce nearly identical frame rates in Inside, as the game does not heavily utilize multi-threaded CPU performance.
On the GPU side, the NVIDIA GeForce RTX 3070 Ti has an average benchmark score of 29945, placing it in the 75th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce RTX 5070 Mobile with a score of 29928, a delta of 0.1%, and the AMD Radeon RX 6800 with a score of 30095, a delta of -0.5%. The NVIDIA GeForce RTX 2080 Ti scores 29783, a delta of 0.5%, and the AMD Radeon RX 6700 scores 30433, a delta of -1.6%. These small deltas indicate that any of these GPUs would deliver similar performance in Inside, with the RX 6700 being slightly faster and the RTX 2080 Ti slightly slower. The differences are minimal enough that users would not notice a practical difference in frame rates.
The Verdict
This PC configuration can absolutely run Inside with exceptional performance. The verdict by resolution is unambiguous: at 1920x1080, all four presets clear the 60 FPS threshold, with the most demanding Ultra preset achieving an average of 188.1 FPS. At 2560x1440, the same holds true, with Ultra settings delivering 135.8 FPS and even the lowest-performing preset remaining well above 60 FPS. At 3840x2160, the system continues to impress, with all presets including Ultra producing frame rates above 60 FPS, topped by an 84.4 FPS average at Ultra settings.
The data confirms that this combination is not just playable but overkill for Inside. The lowest frame rate recorded across all tests is 84.4 FPS at 4K Ultra, which is 24.4 FPS above the playability threshold. This means that players can enable maximum settings at any resolution without worrying about dropping below 60 FPS. The Ryzen 9 5950X's high single-thread performance and the RTX 3070 Ti's robust rasterization capabilities ensure a smooth experience throughout the game's atmospheric puzzle-platformer levels.
How This Combo Ranks
This specific CPU-GPU combination ranks 1289th out of 3716 tested combos in the benchmark database for Inside. This places the system in the top 34.7% of all tested configurations, which is notable given that many of the combos above it likely feature newer, more expensive hardware. The ranking reflects the balanced performance of the Ryzen 9 5950X and RTX 3070 Ti, where the CPU's 91st percentile standing and the GPU's 75th percentile standing combine to produce a system that handles this game with significant authority. The rank is somewhat surprising given the raw performance numbers, but it indicates that many other tested systems achieve similarly high frame rates in this relatively lightweight title.
The high percentile rankings of the individual components suggest that this combo is well-matched for Inside, even if it does not top the overall leaderboard. The rank of 1289 out of 3716 is a strong showing, especially considering that the game's release date of 2016-07-06 means it does not require high-end hardware to run smoothly. The data indicates that this combination would provide a seamless experience for any player, regardless of their display resolution or settings preferences.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 188.1 FPS. This is the clear choice for players with 1080p displays, as it provides the highest visual fidelity while maintaining a frame rate that is more than triple the playability threshold. The performance headroom is so large that players could even enable additional supersampling or other GPU-intensive features without concern.
At 2560x1440, the Ultra preset is again the best option, producing an average of 135.8 FPS. This delivers the full visual experience of Inside while keeping frame rates well above 60 FPS, making it suitable for high-refresh-rate monitors. The 75.8 FPS margin above the threshold ensures that even the most demanding scenes in the game will not cause noticeable stuttering or frame drops.
For 3840x2160, the Ultra preset remains the best choice, with an average of 84.4 FPS. While this is the lowest performance of any tested configuration, it still exceeds the 60 FPS playability threshold by 24.4 FPS, providing a smooth and immersive experience on 4K displays. The data suggests that players with 4K monitors should have no reservations about enabling maximum settings, as the system has ample performance to handle the game's demands without compromise.