Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
279 FPS
Ultra 1080p Measured
132 FPS

1440p (2K / QHD)

Low 1440p Measured
205 FPS
Ultra 1440p Measured
97 FPS

4K (Ultra HD)

Low 4K Measured
126 FPS
Ultra 4K Measured
57 FPS
7.2ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 51,947
Graphics Card
Required 27,118
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 57 66 101 126
1440p QHD 97 102 159 205
1080p Full HD 132 139 228 279

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 139
1920x1080 Low 279
1920x1080 Medium 228
1920x1080 Ultra 132
2560x1440 High 102
2560x1440 Low 205
2560x1440 Medium 159
2560x1440 Ultra 97
3840x2160 High 66
3840x2160 Low 126
3840x2160 Medium 101
3840x2160 Ultra 57

Performance Analysis: Inside on Your System

The AMD Ryzen 9 5950X and NVIDIA GeForce RTX 3060 Ti combination delivers a decisive performance outcome for Inside, a Puzzle Platformer released in 2016. The benchmark data indicates that this pairing is more than sufficient for the game, with average frame rates that exceed the 60 FPS playable threshold across nearly every tested configuration. The analysis reveals a system that is heavily GPU-bound at higher resolutions but possesses enough CPU headroom to push frame rates to extreme levels at lower settings.

Similar Performance Alternatives

The Ryzen 9 5950X sits in a performance tier where its nearest rivals are a mix of modern and previous-generation high-end processors. Its average benchmark score of 51947 places it within a tight cluster of competitors. The Intel Core Ultra 5 235HX scores 52073, which is a negligible 0.2% difference, making it a near-identical match in overall CPU capability. Similarly, the AMD EPYC 8124P trails by just 0.3% with a score of 52121, while the Intel Core i9-13900F is 0.4% behind with 51730 points. The Intel Core i7-14700 leads the group slightly with 52301 points, a 0.7% advantage. In practical terms, a system built with any of these processors would deliver indistinguishable performance in Inside, as the game is unlikely to stress the multi-threaded capabilities of any of these chips. The CPU's 91st percentile ranking among all tested processors further confirms that it is far more powerful than needed for this title.

On the graphics side, the RTX 3060 Ti's average score of 16129 positions it alongside several AMD options. The AMD Radeon RX 9060 comes within 0.7% with a score of 16014, suggesting that it would offer comparable frame rates in Inside. The AMD Radeon Pro 5600M and AMD Radeon RX 5700 XT both score 16351 and 16361 respectively, putting them 1.4% ahead of the RTX 3060 Ti, a margin that would translate to a difference of only a few frames per second. The AMD Radeon R9 370X, despite being an older architecture, scores 15862, which is just 1.7% behind. This indicates that the RTX 3060 Ti's performance class is well-populated, and users with any of these GPUs would see similar results. The GPU's 59th percentile ranking highlights that while it is a mid-range card, it is more than adequate for the modest graphical demands of Inside.

How This Combo Ranks

Within the extensive database of 3716 tested CPU and GPU combinations, this specific pairing achieves a rank of 2617. This position places it in the lower third of all combos, which may initially seem underwhelming given the hardware's individual strengths. However, this ranking is a reflection of the overall benchmark suite, which includes far more powerful and expensive configurations. For the specific game Inside, the ranking does not accurately represent the experience, as the measured frame rates are overwhelmingly positive. The rank of 2617 is heavily influenced by the CPU's 91st percentile and GPU's 59th percentile scores, which are measured across a wide range of synthetic workloads that are far more demanding than a puzzle platformer. The data clearly shows that while this combo may not top global charts, it is entirely overqualified for the task at hand, delivering frame rates that are several times higher than the playable threshold.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the system demonstrates exceptional capability. The Low preset yields an average of 278.7 FPS, which is a phenomenal result. Moving to Medium reduces this to 227.7 FPS, while the High preset still manages a very smooth 138.6 FPS. Even the most demanding Ultra preset produces an average of 132.4 FPS, which is more than double the 60 FPS playable threshold. The scaling from Low to Ultra at this resolution shows a reduction of roughly 52%, indicating that while settings do have an impact, the hardware is strong enough to maintain high performance across the board.

At 2560x1440, the performance remains impressive. The Low preset averages 204.6 FPS, which is still very high. Medium drops to 159.2 FPS, and High falls to 101.8 FPS. The Ultra preset, which is the most demanding, still achieves an average of 96.9 FPS. This shows that even at 1440p, the system can comfortably run the game at maximum settings while maintaining frame rates well above 60 FPS. The drop from Low to Ultra is approximately 53%, consistent with the pattern seen at 1080p.

The 3840x2160 resolution, or 4K, presents the most significant challenge. At this resolution, the Low preset averages 126.1 FPS, which is still excellent. The Medium preset averages 101.3 FPS, and High manages 65.9 FPS. The Ultra preset, however, drops to an average of 57.3 FPS, which falls just below the 60 FPS playable threshold. This is the only configuration in the entire dataset that fails to meet the playability standard. The performance scaling from Low to Ultra at 4K is a steeper 55% drop, and the gap between High and Ultra is particularly notable, with a 13% reduction in frame rate.

The Verdict

The benchmark data answers the core question definitively: this PC can run Inside exceptionally well. The verdict by resolution confirms that at 1920x1080, all four presets (Low, Medium, High, and Ultra) are playable, with the highest quality setting achieving an average of 132.4 FPS. At 2560x1440, the same is true, with the Ultra preset producing 96.9 FPS, providing a smooth and visually rich experience. At 3840x2160, the system can run the game at High settings with an average of 65.9 FPS, which clears the 60 FPS threshold. It can also run at Medium with 101.3 FPS and Low with 126.1 FPS. The only configuration that fails to reach 60 FPS is the Ultra preset at 4K, which averages 57.3 FPS. This suggests that for the absolute highest fidelity at 4K, users may need to make a minor compromise, but for all practical purposes, this hardware is more than capable of delivering a flawless gaming experience in Inside.

FAQ

*Q: Can this system run Inside at 4K resolution?*

A: Yes, it can. At 3840x2160, the system achieves an average of 65.9 FPS on High settings, which is above the 60 FPS playable threshold. It also runs at 101.3 FPS on Medium and 126.1 FPS on Low. However, the Ultra preset at 4K falls short, averaging 57.3 FPS.

Q: What is the best settings preset for 1440p gaming?

A: The best settings preset at 2560x1440 is Ultra, which delivers an average of 96.9 FPS. This is the most demanding preset that still maintains a frame rate well above the 60 FPS threshold.

Q: Is the CPU or GPU more of a bottleneck for this game?

A: The data suggests the GPU is the limiting factor at higher resolutions. The frame rate drops significantly more when moving from 1440p to 4K compared to moving from 1080p to 1440p, indicating that the graphical load is the primary constraint. The CPU is powerful enough to avoid becoming a bottleneck at any tested setting.

Q: How does the RTX 3060 Ti compare to its nearest rivals in this game?

A: The RTX 3060 Ti's average benchmark score is 16129. Its nearest rival, the AMD Radeon RX 9060, scores 16014, which is a 0.7% difference. The AMD Radeon Pro 5600M and RX 5700 XT are both 1.4% ahead, while the AMD Radeon R9 370X is 1.7% behind. These small margins would result in very similar frame rates in Inside.

Q: What is the playable threshold and does the system meet it at all settings?

A: The playable threshold is defined as 60 FPS. The system meets or exceeds this threshold in 11 out of 12 tested configurations. The only exception is the 3840x2160 Ultra preset, which averages 57.3 FPS.

Q: Are the frame rates consistent or do they vary significantly?

A: The data provided only includes average FPS values. The minimum and maximum FPS fields are null for all entries, so a full analysis of frame time consistency is not possible from this dataset. However, the high average values suggest a generally smooth experience.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is the recommended choice. At 1920x1080, the Ultra preset is the best option, delivering an average of 132.4 FPS. This provides the maximum visual quality without any performance concerns. At 2560x1440, the Ultra preset is again the top recommendation, with an average of 96.9 FPS. This is a significant margin above the playable threshold, allowing for a fully maxed-out experience. At 3840x2160, the High preset is the best choice, averaging 65.9 FPS. While this is above 60 FPS, it is the closest margin in the dataset. The Ultra preset at this resolution drops to 57.3 FPS, so High is the optimal balance of quality and performance for 4K gaming.

CPU and GPU Roles

The benchmark data reveals a clear division of labor between the CPU and GPU at different resolutions. At 1920x1080, the system's performance is exceptionally high, with the Low preset reaching 278.7 FPS. This suggests that the CPU is capable of feeding the GPU with enough data to achieve such high frame rates. However, the scaling from Low to Ultra at this resolution shows a 52% drop, indicating that the GPU is still responsible for the majority of the performance variance. The CPU's immense power is not a limiting factor at 1080p.

As the resolution increases to 2560x1440, the GPU's role becomes more prominent. The frame rates at Low settings fall from 278.7 FPS to 204.6 FPS, a 27% reduction that is directly attributable to the increased pixel count. The scaling from Low to Ultra remains similar at 53%, showing that the GPU is still the primary driver of performance. At 3840x2160, the GPU is clearly the dominant component. The Low preset drops to 126.1 FPS, a further 38% reduction from the 1440p result. The gap between High and Ultra at 4K is particularly telling: the 65.9 FPS High result is only 15% higher than the 57.3 FPS Ultra result, showing that the GPU is struggling to maintain performance at the highest settings and resolution. The CPU, with its 16 cores and 32 threads, is never a bottleneck in this game, as even the most GPU-intensive scenario at 4K Ultra still yields nearly 60 FPS. The data indicates that users with this CPU and GPU should adjust graphical settings, not CPU settings, to achieve their desired frame rate.