Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 66 | 70 | 112 | 140 |
| 1440p QHD | 106 | 111 | 178 | 222 |
| 1080p Full HD | 147 | 155 | 247 | 309 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
AMD Ryzen 9 5950X paired with AMD Radeon RX 9060 delivers a highly capable configuration for Inside, a Puzzle Platformer from 2016. Benchmark data shows this combination achieves well above the 60 FPS playable threshold at every tested resolution and preset, making it a straightforward recommendation for anyone targeting smooth gameplay.
Similar Performance Alternatives
The CPU's nearest rivals, based on aggregate benchmark scores, indicate that the Ryzen 9 5950X sits in a tightly contested performance band. The Intel Core Ultra 5 235HX scores 52,073, a mere 0.2% below the 5950X's average. Similarly, the AMD EPYC 8124P trails by 0.3% with a score of 52,121. On the other side, the Intel Core i9-13900F leads by 0.4% with 51,730, while the Intel Core i7-14700 is 0.7% ahead at 52,301. For Inside, any of these processors would deliver essentially identical frame rates, as the game's demands are modest and the CPU is not the limiting factor.
On the GPU side, the Radeon RX 9060's nearest rivals show a similar story of tight grouping. The NVIDIA GeForce RTX 3060 Ti scores 16,129, which is 0.7% higher than the RX 9060's average. The AMD Radeon R9 370X and Radeon RX 7700 both score slightly lower at 15,862 and 15,852 respectively, representing 1% deficits. The AMD Radeon Pro W5500 trails by 2.1% with 15,679. In practical terms for Inside, these differences are negligible; all of these GPUs would push frame rates far beyond what the display can likely show at 1080p and 1440p. The RX 9060's percentile ranking of 59 among all GPUs places it in the mid-range, yet the game's low graphical complexity means even this mid-pack performance is overkill.
CPU and GPU Roles
The data reveals that the GPU is overwhelmingly the dominant component for Inside, with CPU scaling showing minimal impact across resolutions. At 4K (3840x2160), moving from Low to High settings drops average FPS from 140 to 70, a 50% reduction, while the CPU workload remains constant. This pattern holds across all resolutions. The GPU's role is further emphasized by the fact that even at 4K Ultra, the system maintains 66 FPS, indicating the RX 9060 has ample headroom.
Resolution scaling demonstrates the GPU's workload increases significantly with pixel count. At 1080p Low, the system achieves 309 FPS, which drops to 222 FPS at 1440p Low (a 28% decrease) and further to 140 FPS at 4K Low (a 55% decrease from 1080p). The CPU, with its 16 cores and 32 threads based on Zen 3 architecture, never becomes a bottleneck in this title. Even at 1080p Ultra, where the CPU typically has the most influence relative to GPU load, the system still produces 147 FPS, suggesting the CPU has substantial spare capacity. For Inside, the RX 9060 is the component that determines performance, while the Ryzen 9 5950X provides a safety margin that would be more relevant in CPU-intensive titles.
FAQ
*Q: Can this system run Inside at 4K with maximum settings?*
A: Yes. At 3840x2160 with Ultra settings, the system achieves an average of 66 FPS, which clears the 60 FPS playable threshold. The High preset runs at 70 FPS, and Medium at 112 FPS.
Q: What is the highest frame rate this combo produces?
A: The maximum measured average is 309 FPS, achieved at 1920x1080 with Low settings. Even at 1080p Ultra, the system still produces 147 FPS on average.
Q: How does the RX 9060 compare to the RTX 3060 Ti?
A: The RX 9060's average benchmark score is 16,014, which is 0.7% lower than the RTX 3060 Ti's 16,129. For Inside, this difference is imperceptible, as both GPUs far exceed the game's requirements.
Q: Is the Ryzen 9 5950X overkill for this game?
A: The CPU's 91st percentile ranking among all CPUs indicates it is far more powerful than needed for Inside. The game's puzzle platformer nature does not stress multi-threaded performance, so the 16-core processor has significant headroom.
Q: What is the minimum FPS at 1440p Medium settings?
A: The measured minimum at 2560x1440 Medium is 151 FPS, with an average of 178 FPS and a maximum of 204 FPS. This ensures consistent smoothness without any risk of dropping below 60 FPS.
Q: Does the system support all modern graphics APIs for this game?
A: The RX 9060 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Since Inside was released in 2016, it will run comfortably within these API specifications regardless of which path the game uses.
The Verdict
This PC can absolutely run Inside at every resolution and preset combination tested. The verdict data confirms all four settings presets—Low, Medium, High, and Ultra—are playable at 3840x2160, 2560x1440, and 1920x1080. At 4K, the best playable setting is Ultra, which runs at an average of 66 FPS, just above the 60 FPS threshold. Moving down to 1440p, Ultra runs at 106 FPS, providing a comfortable margin. At 1080p, Ultra achieves 147 FPS, which is more than double the playable threshold.
The performance pattern suggests that even the most demanding configuration at 4K Ultra leaves only 6 FPS of headroom above the playable line, but the frame rate remains stable with no minimum FPS data indicating drops below 60. For gamers with high refresh rate displays, 1440p and 1080p offer exceptional smoothness, with 1440p Ultra providing 106 FPS and 1080p Ultra reaching 147 FPS. The system is well-matched for this title, with neither component presenting a weakness.
How This Combo Ranks
In the database of tested combinations for Inside, this pairing ranks 2,129 out of 3,716 total combos. This places it in the upper-middle portion of all configurations tested, which is logical given the game's age and the mid-range positioning of the RX 9060. The rank reflects that many higher-tier GPU configurations exist that would produce even higher frame rates, but for practical gameplay purposes, this system delivers everything needed.
The 59th percentile GPU ranking and 91st percentile CPU ranking create an interesting dynamic. The CPU is in the top 10% of all processors, while the GPU sits near the middle of the pack. For Inside, the GPU's mid-range status is irrelevant because the game's requirements are so low. The high CPU percentile provides future-proofing for more demanding titles, while the current performance for this game is more than sufficient. This combination represents a balanced pairing where the CPU outclasses the GPU, but the GPU still exceeds the game's demands.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains 60 FPS is Ultra, with an average of 66 FPS. This provides 6 FPS of headroom above the playable threshold. If you prefer higher margins, High runs at 70 FPS and Medium at 112 FPS.
At 2560x1440, Ultra is again the best choice, delivering 106 FPS on average. This doubles the playable threshold with ample room for frame time variance. High runs at 111 FPS, and Medium at 178 FPS, but Ultra offers the best visual quality without compromise.
At 1920x1080, Ultra runs at 147 FPS, which is nearly 2.5 times the playable threshold. This makes Ultra the clear recommendation, as there is no performance reason to reduce settings. Even the most demanding preset leaves substantial headroom, ensuring smooth gameplay on any refresh rate up to 144Hz. For all resolutions, the system's performance allows you to maximize visual quality without sacrificing frame rate.