Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
433 FPS
Ultra 1080p Measured
327 FPS

1440p (2K / QHD)

Low 1440p Measured
388 FPS
Ultra 1440p Measured
243 FPS

4K (Ultra HD)

Low 4K Measured
321 FPS
Ultra 4K Measured
153 FPS
3ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 58,386
Graphics Card
Required 27,118
Your GPU 77,712

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 153 160 256 321
1440p QHD 243 255 358 388
1080p Full HD 327 333 399 433

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 333
1920x1080 Low 433
1920x1080 Medium 399
1920x1080 Ultra 327
2560x1440 High 255
2560x1440 Low 388
2560x1440 Medium 358
2560x1440 Ultra 243
3840x2160 High 160
3840x2160 Low 321
3840x2160 Medium 256
3840x2160 Ultra 153

Performance Analysis: Inside on Your System

How This Combo Ranks

The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 5090 D ranks 6th out of 3,716 tested combos for Inside. This places the configuration in the top 0.2% of all tested systems, which is exceptionally strong for a 2D puzzle platformer released in 2016. The combo’s rank is driven by both components sitting at the 92nd percentile among all CPUs and GPUs respectively. The CPU’s average benchmark score of 58,386 is nearly identical to its closest rival, the Intel Xeon Platinum 8260M at 58,323, differing by only 0.1%. The GPU’s average score of 77,712 compares closely with the AMD Radeon RX 6650M XT at 76,904, a 1.1% gap, and the AMD Radeon RX 6850M XT at 78,940, a -1.6% gap. These percentile and rival comparisons indicate that while the hardware is top-tier, the game itself is not demanding enough to differentiate between near-identical scores.

Benchmark results indicate that the CPU’s single-thread performance is particularly relevant here. The Ryzen 7 9850X3D scores 4,704 in Passmark single-thread tests, while its multi-thread score reaches 41,318. For a game like Inside, which relies on consistent frame pacing rather than massive thread counts, the single-thread strength matters more. The GPU’s DirectX 11 score of 371 and DirectX 12 score of 219 from Passmark are modest compared to its raw compute capabilities, but Inside’s simple geometry and lighting do not stress modern rasterization pipelines. The combo’s rank of 6 suggests that only a handful of exotic configurations (likely with newer or more specialized hardware) exceed this setup, and for practical purposes, this system is overkill for the game’s requirements.

FAQ

Q: What is the highest playable setting at 4K resolution?

A: All four tested settings (Low, Medium, High, Ultra) are playable at 3840x2160. The best setting is Ultra with an average FPS of 153.

Q: How much faster is the Low preset compared to Ultra at 1080p?

A: At 1920x1080, the Low preset averages 433 FPS, while Ultra averages 327 FPS. That is a 32.4% increase in frame rate when dropping from Ultra to Low.

Q: Does the Medium preset show any frame drops?

A: Yes, the Medium preset at 3840x2160 shows a minimum FPS of 218 and a maximum of 295, with an average of 256. At 2560x1440, the minimum is 304 and maximum is 412, averaging 358. At 1920x1080, the minimum is 339 and maximum is 459, averaging 399.

Q: Which resolution delivers the highest average FPS across all settings?

A: The 1920x1080 resolution consistently delivers the highest averages. The Low preset reaches 433 FPS, which is the highest recorded average across all resolutions and settings.

Q: Is the combo rank affected by the game’s age?

A: The game released on 2016-07-06, and the combo ranks 6th out of 3,716 combos. The rank reflects that Inside is not graphically intensive, so even mid-range hardware can achieve high frame rates, but this specific combo still outperforms 99.8% of tested systems.

Q: What are the closest rival components for this CPU and GPU?

A: For the CPU, the Intel Xeon Platinum 8260M (0.1% slower), Intel Core i9-14900 (0.5% slower), and AMD Ryzen AI 9 HX 470 (0.7% faster) are nearest. For the GPU, the AMD Radeon RX 6650M XT (1.1% slower), AMD Radeon RX 6850M XT (1.6% faster), and NVIDIA Tesla P100 PCIe 16 GB (2.4% faster) are closest.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average FPS of 153. This is well above the 60 FPS threshold, and the data shows that even the most graphically intensive settings cannot push the frame rate below playable levels. For users prioritizing visual fidelity at 4K, Ultra is the recommended choice.

At 2560x1440, Ultra is again the best setting, delivering an average FPS of 243. The gap between Ultra and the next setting, High at 255 FPS, is minimal, but the Ultra preset provides the highest quality without any risk of dropping below 60 FPS. The minimum FPS recorded at Medium is 304, which suggests that even under heavy load, the system maintains massive headroom.

At 1920x1080, Ultra remains the top pick with an average FPS of 327. The Low preset reaches 433 FPS, but this is unnecessary for gameplay. Since all settings exceed 60 FPS by a wide margin, the choice comes down to visual quality versus raw frame rate, and Ultra offers the best balance. The Medium preset’s minimum FPS of 339 indicates that even the most demanding moments in Inside will not cause perceptible stutter.

Similar Performance Alternatives

For the CPU, the nearest rivals are the Intel Xeon Platinum 8260M, Intel Xeon w5-2545, Intel Core i9-14900, and AMD Ryzen AI 9 HX 470. The Xeon Platinum 8260M scores 58,323 (0.1% lower), the Xeon w5-2545 scores 58,504 (0.2% higher), the Core i9-14900 scores 58,115 (0.5% lower), and the Ryzen AI 9 HX 470 scores 58,826 (0.7% higher). These differences are negligible, meaning any of these CPUs would deliver nearly identical frame rates in Inside. The Ryzen AI 9 HX 470 is technically the fastest of the group, but the delta is within measurement noise.

For the GPU, the AMD Radeon RX 6650M XT (76,904 average score, 1.1% lower), AMD Radeon RX 6850M XT (78,940, 1.6% higher), NVIDIA Tesla P100 PCIe 12 GB (79,396, 2.1% higher), and NVIDIA Tesla P100 PCIe 16 GB (79,605, 2.4% higher) are the closest alternatives. Interestingly, the Tesla P100 cards outperform the RTX 5090 D in average benchmark score, but these are compute-oriented cards without consumer display outputs. For gaming, the RX 6850M XT would behave nearly identically to the RTX 5090 D in Inside, as the game’s low requirements mean the GPU is rarely the bottleneck. The data shows that swapping to any of these alternatives would result in less than 2.5% performance difference, which is imperceptible in a game running at 150+ FPS.

Measured FPS Breakdown

At 3840x2160, the Low preset averages 321 FPS, Medium averages 256 FPS (with a minimum of 218 and maximum of 295), High averages 160 FPS, and Ultra averages 153 FPS. The progression from Low to Ultra shows a 52.3% reduction in frame rate, but even the lowest average is more than double the 60 FPS threshold. The Medium preset’s minimum of 218 FPS indicates that the frame pacing remains consistent even when the scene complexity increases.

At 2560x1440, Low averages 388 FPS, Medium averages 358 FPS (minimum 304, maximum 412), High averages 255 FPS, and Ultra averages 243 FPS. The difference between Medium and High is 28.8%, while the difference between High and Ultra is only 4.7%. This suggests that the Ultra preset adds minimal visual improvements over High while costing some performance, but both remain far above playable levels. The Medium preset’s minimum of 304 FPS is higher than the Ultra average at 4K, highlighting how resolution scaling affects performance.

At 1920x1080, Low averages 433 FPS, Medium averages 399 FPS (minimum 339, maximum 459), High averages 333 FPS, and Ultra averages 327 FPS. The gap between Medium and High is 16.5%, while the gap between High and Ultra is only 1.8%. The maximum FPS of 459 at Medium shows that the system can push extremely high frame rates when the GPU is not fully utilized. The minimum FPS of 339 at Medium is still above the Ultra average at 1440p, demonstrating that resolution has a larger impact than settings on this hardware.

The Verdict

This PC can absolutely run Inside, and the data shows it does so with extraordinary headroom. At every resolution tested (3840x2160, 2560x1440, and 1920x1080), all four settings (Low, Medium, High, and Ultra) clear the 60 FPS threshold. The verdict by resolution confirms that Ultra is the best setting at each resolution, with average FPS of 153 at 4K, 243 at 1440p, and 327 at 1080p. The lowest recorded average across all tests is 153 FPS at 4K Ultra, which is still 2.5 times the playable threshold. The minimum FPS recorded at 4K Medium is 218, and at 1440p Medium it is 304, indicating that even the most demanding scenes do not cause frame drops below playable levels.

For users with a 60 Hz display, this system will never drop below the refresh rate, even at maximum settings. For users with high-refresh-rate monitors (144 Hz or 240 Hz), the system can also maintain consistent frame rates at 1440p and 1080p, though 4K Ultra may dip below 240 FPS in some scenes. The data strongly suggests that the bottleneck is not the hardware but the game’s engine, which caps performance based on its single-threaded rendering pipeline. In short, this combo is more than capable of running Inside at maximum quality with no compromises.

CPU and GPU Roles

The CPU and GPU roles in Inside are asymmetric, with the CPU playing a more significant part at lower resolutions. At 1920x1080, the Low preset averages 433 FPS, while the Ultra preset averages 327 FPS. This 24.5% difference is driven by GPU workload, but the fact that the CPU’s single-thread score of 4,704 is high enough to feed the GPU at these frame rates shows that the CPU is not the limiting factor. The GPU’s DirectX 11 score of 371 is modest, but Inside’s simple rendering does not require heavy GPU compute. At 1080p, the system is likely CPU-bound, as the GPU can render frames faster than the CPU can issue draw calls.

At 2560x1440, the Low preset averages 388 FPS, and Ultra averages 243 FPS. The percentage difference between Low and Ultra is 37.4%, which is larger than at 1080p. This indicates that the GPU becomes more involved as resolution increases, since pixel fill rate and memory bandwidth are more stressed. The GPU’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are far beyond what Inside requires, but the scaling shows that the GPU’s rasterization units are the primary driver of the frame rate drop. The CPU’s role diminishes slightly, as the GPU is no longer waiting for the CPU to catch up.

At 3840x2160, the Low preset averages 321 FPS, and Ultra averages 153 FPS, a 52.3% reduction. This is the largest settings scaling across all resolutions, confirming that the GPU is the dominant factor at 4K. The CPU’s multi-thread score of 41,318 is irrelevant here because Inside uses few threads; instead, the GPU’s pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s determine performance. The data shows that as resolution increases, the GPU’s role grows from secondary to primary, while the CPU’s role remains constant but less impactful. For users targeting 4K, the GPU is the component to watch, while at 1080p, the CPU’s single-thread performance is more likely to set the ceiling.