Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
431 FPS
Ultra 1080p Measured
263 FPS

1440p (2K / QHD)

Low 1440p Measured
386 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
250 FPS
Ultra 4K Measured
119 FPS
3.6ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 69,996
Graphics Card
Required 27,118
Your GPU 49,957

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 119 125 200 250
1440p QHD 189 199 318 386
1080p Full HD 263 277 398 431

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 277
1920x1080 Low 431
1920x1080 Medium 398
1920x1080 Ultra 263
2560x1440 High 199
2560x1440 Low 386
2560x1440 Medium 318
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 250
3840x2160 Medium 200
3840x2160 Ultra 119

Performance Analysis: Inside on Your System

The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 5070 Ti delivers overwhelming performance in Inside, a 2016 puzzle platformer. Across every resolution and preset tested, the combination produces average frame rates that are multiples of the 60 FPS playability threshold, ranging from a low of 119 FPS at 4K Ultra to a high of 431 FPS at 1080p Low. The data indicates this system is far beyond what the game requires, making it a definitive yes for any display configuration.

Measured FPS Breakdown

At 1920x1080, the lowest resolution tested, this combination produces staggering numbers. The Low preset averages 431 FPS, while Medium drops slightly to 398 FPS with a minimum of 338 FPS and a maximum of 457 FPS. High settings average 277 FPS, and Ultra averages 263 FPS. The gap between Low and Ultra is 168 FPS, which is substantial but still leaves Ultra at over four times the 60 FPS threshold. The Medium preset's minimum of 338 FPS confirms that even in the heaviest moments, the system never approaches a playability concern.

Moving to 2560x1440, the frame rates remain extremely high. Low averages 386 FPS, Medium averages 318 FPS with a min of 271 FPS and a max of 366 FPS. High averages 199 FPS, and Ultra averages 189 FPS. The drop from 1080p to 1440p is noticeable but modest in absolute terms — the High preset loses 78 FPS, and Ultra loses 74 FPS. The data still shows every preset at least tripling the 60 FPS target, with the lowest recorded figure at 271 FPS in the Medium preset's minimum.

At 3840x2160, the resolution scaling becomes more pronounced. Low averages 250 FPS, Medium averages 200 FPS with a min of 170 FPS and a max of 230 FPS. High drops to 125 FPS, and Ultra falls to 119 FPS. The transition from 1440p to 4K costs the High preset 74 FPS and the Ultra preset 70 FPS. Even at the most demanding setting available, the average remains 119 FPS — nearly double the playable threshold. The Medium preset's minimum of 170 FPS is still far higher than what most games would require, showing the hardware is never stressed.

Across all resolutions, the Medium preset is the only one with complete min/max data. At 1080p, the range spans 338 to 457 FPS; at 1440p, 271 to 366 FPS; at 4K, 170 to 230 FPS. The minimum frames always stay above 170 FPS, which means even in the most demanding scenes, the user sees no stutter or frame drop that would affect gameplay in a puzzle platformer.

CPU and GPU Roles

The scaling pattern between resolutions reveals that the GPU is the primary bottleneck at higher resolutions, while the CPU has more influence at lower resolutions. At 1080p, the difference between Low (431 FPS) and Ultra (263 FPS) is 168 FPS, indicating the GPU is still doing significant work. However, the CPU's single-thread score of 4691 on PassMark and multithread score of 36470 suggest it can feed frames at these rates easily. The Ryzen 7 9700F has 8 cores and 16 threads, and Inside is a puzzle platformer that typically uses limited threads, so the CPU is not a limiting factor.

When resolution jumps from 1080p to 1440p, the average FPS across all settings drops by roughly 10-45%. The Low preset goes from 431 to 386 FPS, a 10.4% decrease. The Ultra preset goes from 263 to 189 FPS, a 28.1% decrease. This indicates the GPU is becoming more dominant, as pixel count increases by 78%, yet frame rates do not drop proportionally — meaning the GPU has substantial headroom.

The transition from 1440p to 4K is where the GPU's role becomes clear. The Low preset drops from 386 to 250 FPS (35.2% decrease), and the Ultra preset drops from 189 to 119 FPS (37% decrease). The 4K resolution has 2.25 times the pixels of 1440p, but the frame rate only drops by about a third, showing that the RTX 5070 Ti's 16 GB of GDDR7 memory and 896.0 GB/s bandwidth are sufficient for the game's demands. The GPU's PassMark G3D score of 32974 and percentile of 86 vs all GPUs confirm it is a high-end part, and Inside's simple graphics do not saturate it.

The CPU's role is more visible at 1080p where the frame rates reach 431 FPS. The Ryzen 7 9700F's single-thread score of 4691 on PassMark and its 5.50 GHz boost clock allow it to feed the GPU quickly. However, the fact that 1080p Low and Medium are only 33 FPS apart (431 vs 398) suggests the CPU is not a bottleneck even at these extreme frame rates. If the CPU were limiting, the gap would be smaller. The data shows the GPU is the main scaling factor, especially as resolution increases.

Similar Performance Alternatives

The CPU's nearest rivals all score within 1% of the Ryzen 7 9700F's average of 69996. The AMD Ryzen 9 7940HX scores 69875, a 0.2% difference, so users with that mobile chip would see nearly identical frame rates. The Intel Core i7-14700KF scores 70163, 0.2% higher, and the AMD Ryzen 9 7950X scores 69515, 0.7% lower. The Intel Core i7-14700K scores 69355, 0.9% higher. These deltas are within noise for a game like Inside, where frame rates are so high that a 1% difference would be about 4 FPS at 4K Ultra (119 vs 115 FPS). All these CPUs would allow the same conclusion: the GPU is the limiting factor.

On the GPU side, the RTX 5070 Ti's average benchmark score is 49957, and its nearest rivals are old or lower-tier cards. The NVIDIA GeForce RTX 5070 Ti scores 50001, a 0.1% difference — this is the same card, so performance is identical. The AMD Radeon RX 6900 XT scores 50951, 2% higher, meaning it would average about 121 FPS at 4K Ultra instead of 119 FPS. The AMD Radeon RX 6800 XT scores 48477, 3.1% lower, which would put it around 115 FPS at 4K Ultra. The Intel Arc A550M scores 49737, 0.4% lower, but it is a mobile GPU. In practice, all these GPUs would produce frame rates far above 60 FPS at every resolution, but the RX 6900 XT is the closest competitor in terms of overall capability. The difference between the RTX 5070 Ti and these rivals is under 3.1%, which means all of them would deliver playable performance in Inside.

FAQ

Q: What is the highest FPS this combo can achieve in Inside?

The highest average FPS recorded is 431 at 1920x1080 with Low settings. The Medium preset at the same resolution averages 398 FPS with a maximum of 457 FPS.

Q: Can this system maintain 60 FPS at 4K with the most demanding settings?

A: Yes, at 3840x2160 with Ultra settings, the average FPS is 119, which is 59 FPS above the 60 FPS threshold. The data shows no minimum FPS recorded for Ultra, but the Medium preset's minimum is 170 FPS, suggesting similar headroom.

Q: Which component is more important for this game at 1440p?

A: The GPU dominates at 1440p. The CPU scores are within 1% of its rivals, but the frame rate drops 28.1% from 1080p to 1440p at Ultra settings, showing the GPU is the bottleneck.

Q: Is the difference between High and Ultra settings significant?

A: The difference is small. At 1080p, Ultra averages 263 FPS compared to 277 FPS for High, a 14 FPS drop. At 4K, the gap is 6 FPS (119 vs 125 FPS). The visual quality improvement may be minimal for such a simple game.

How This Combo Ranks

Out of 3716 tested combinations, this CPU-GPU pair ranks 157th in Inside. That puts it in the top 4.2% of all tested systems, which is remarkable for a game this old. The rank indicates that most other combinations either have weaker CPUs, weaker GPUs, or both. The combination of an 8-core Ryzen 7 9700F and an RTX 5070 Ti is far above the typical system used for this game, which is likely why the frame rates are so high. The percentile vs. all CPUs is 94, and the percentile vs. all GPUs is 86, meaning this combo is in the top 14% of GPUs and top 6% of CPUs.

Best Settings per Resolution

At 3840x2160, the best setting is Ultra with an average of 119 FPS. The data shows all settings — Low, Medium, High, and Ultra — are playable at 4K, but Ultra provides the maximum visual quality while staying above 60 FPS. The 119 FPS average is exactly the number to remember, with no minimum FPS recorded for this preset.

At 2560x1440, Ultra is also the best setting, averaging 189 FPS. This is 70 FPS higher than the 4K Ultra result, showing the resolution drop gives substantial headroom. The Medium preset's min of 271 FPS indicates that even the lower settings would be far smoother.

At 1920x1080, the best setting is Ultra at 263 FPS. This is the highest average for Ultra across all resolutions, and it is 203 FPS above the 60 FPS threshold. The Low preset at 431 FPS is the absolute fastest, but Ultra is the most demanding preset that stays above 60 FPS, so it is the recommended setting.

FAQ

Q: Is this CPU-GPU combo overkill for Inside?

A: The data shows the system is massively overkill. At 1080p Ultra, it averages 263 FPS, which is more than four times the playable threshold. The game is simple, and even the weakest component in this combo would be sufficient.

Q: What is the minimum FPS that might occur during intense scenes?

A: The only preset with min FPS data is Medium. At 1080p, the minimum is 338 FPS; at 1440p, 271 FPS; at 4K, 170 FPS. These are still far above 60 FPS, so the worst-case frame rate is never an issue.

Q: How does this combo compare to the average system tested?

A: The combination ranks 157th out of 3716 tested, meaning it is in the top 4.2% of all combinations tested. The GPU ranks in the 86th percentile of all GPUs, and the CPU ranks in the 94th percentile.

Q: Can I run the game at 4K with all settings maxed?

A: Yes, at 4K Ultra the average FPS is 119, which is above 60. The data lists all four settings as playable at this resolution, so the game runs perfectly at 4K.

The Verdict

This PC can run Inside at any resolution with any settings. The verdict by resolution shows all four presets are playable at every resolution. At 3840x2160, Ultra averages 119 FPS; at 2560x1440, Ultra averages 189 FPS; at 1920x1080, Ultra averages 263 FPS. Every single setting combo exceeds the 60 FPS threshold by a wide margin. The low end is the 4K Ultra at 119 FPS, which is still nearly double the requirement. The 1080p Low at 431 FPS is the maximum, but no user needs to accept the visual compromise. The data proves this system is designed for far more demanding titles, and for Inside it provides a flawless experience at maximum quality across the board.