Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
333 FPS
Ultra 1080p Measured
159 FPS

1440p (2K / QHD)

Low 1440p Measured
239 FPS
Ultra 1440p Measured
114 FPS

4K (Ultra HD)

Low 4K Measured
150 FPS
Ultra 4K Measured
72 FPS
6ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 33,079
Graphics Card
Required 27,118
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 72 75 120 150
1440p QHD 114 120 192 239
1080p Full HD 159 167 266 333

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 167
1920x1080 Low 333
1920x1080 Medium 266
1920x1080 Ultra 159
2560x1440 High 120
2560x1440 Low 239
2560x1440 Medium 192
2560x1440 Ultra 114
3840x2160 High 75
3840x2160 Low 150
3840x2160 Medium 120
3840x2160 Ultra 72

Performance Analysis: Inside on Your System

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 4060 delivers an exceptionally strong showing in Inside, a 2016 puzzle platformer with modest hardware demands. Measured benchmark data indicates that this combination exceeds the 60 FPS playability threshold at every tested resolution and preset, with performance scaling predictably from 1080p up to 4K. The data set includes average, minimum, and maximum frame rates for the Medium preset at all three resolutions, while other presets report only average FPS values.

Measured FPS Breakdown

At 1920x1080, the combo operates far beyond any display refresh rate concerns. The Low preset delivers an average of 333 FPS. Stepping up to Medium, the average drops to 266 FPS, with a minimum of 226 FPS and a maximum of 306 FPS. High settings produce an average of 167 FPS, while the Ultra preset, which is the most demanding, still averages 159 FPS. These results show no bottleneck risk at 1080p; even the heaviest preset leaves nearly 100 FPS of headroom above the 60 FPS playability line.

Moving to 2560x1440, performance scales predictably but remains very high. The Low preset averages 239 FPS. Medium sees a reduction to 192 FPS, with a minimum of 163 FPS and a maximum of 220 FPS. High settings yield an average of 120 FPS, and Ultra stays well above the threshold at 114 FPS. The gap between the High and Ultra presets is just 6 FPS, suggesting that the visual uplift from Ultra comes at a negligible frame-time cost at this resolution.

At 3840x2160, the picture shifts noticeably. The Low preset still averages 150 FPS, which is a significant drop from the 333 FPS seen at 1080p. Medium settings produce an average of 120 FPS, with a minimum of 102 FPS and a maximum of 138 FPS — the first time the minimum dips below 110 FPS. High settings average 75 FPS, and Ultra settings average 72 FPS. The Ultra result is only 12 FPS above the playable threshold, indicating that 4K Ultra is the most demanding configuration this combo will encounter. The minimum FPS for Ultra at 4K is not provided, but the average of 72 FPS suggests the experience remains smooth, though with less margin than at lower resolutions.

CPU and GPU Roles

Inside is not a demanding title for either component, but the data reveals how the balance shifts as resolution increases. At 1920x1080, the average FPS across presets is remarkably high, ranging from 159 to 333. The difference between the Low and Medium presets at 1080p is 67 FPS, while the difference between Medium and High is 99 FPS. This pattern indicates that the GPU is the primary limiting factor even at lower resolutions, as the CPU — an 8-core, 16-thread Zen 4 part with a 96 MB L3 cache — has ample headroom.

At 2560x1440, the frame rates compress. The Low preset averages 330 FPS, but Medium drops to 192 FPS. The scaling between 1080p and 1440p is steep: for the Low preset, the average drops from 333 to 330 (a 0.9% reduction), while for the Medium preset, the drop is from 266 to 192 (a 27.8% reduction). This disproportionate scaling shows that the GPU’s shading units and memory bandwidth become the binding constraint as pixel count rises. The RTX 4060’s 272.0 GB/s of bandwidth and 15.11 TFLOPS FP32 performance are sufficient, but the workload grows faster than the CPU bottleneck.

At 3840x2160, the GPU is definitively the dominant component. The Low preset still delivers 150 FPS, but Medium falls to 120 FPS, High to 75 FPS, and Ultra to 72 FPS. The difference between 1440p High (120 FPS) and 4K High (75 FPS) is 45 FPS, a 37.5% drop. Similarly, the 1440p Ultra (114 FPS) versus 4K Ultra (72 FPS) shows a 36.8% reduction. The CPU’s role, by contrast, is static; its high single-thread benchmark scores (2426 in Geekbench) and strong multicore results (16817 in Cinebench R23) are far beyond the needs of this game. The data thus shows that the RTX 4060 is the sole bottleneck at 4K, while the 7800X3D has no measurable influence on frame rates across any resolution.

FAQ

*Q: Can this PC run Inside at 4K with Ultra settings?*

A: Yes. At 3840x2160 with Ultra settings, the combination achieves an average of 72 FPS, which is above the 60 FPS playable threshold. This is the most demanding configuration in the dataset, and it still clears the line.

Q: What is the highest preset that stays above 60 FPS at 1080p?

A: All four presets — Low, Medium, High, and Ultra — exceed 60 FPS at 1920x1080. The Ultra preset averages 159 FPS, while the Low preset reaches 333 FPS.

Q: Does the Medium preset have a lower minimum FPS than the average at 1440p?

A: Yes. At 2560x1440 with Medium settings, the average is 192 FPS, but the recorded minimum is 163 FPS and the maximum is 220 FPS. The minimum is still far above the 60 FPS threshold.

Q: Is there a large performance gap between High and Ultra presets at 4K?

A: No. At 3840x2160, the High preset averages 75 FPS while Ultra averages 72 FPS. The 3 FPS difference indicates that Ultra imposes minimal additional load over High at this resolution.

Q: How does the 1080p Low preset compare to the 4K Low preset?

A: The 1920x1080 Low preset averages 333 FPS, which is 2.2 times higher than the 3840x2160 Low preset’s 150 FPS. This highlights the GPU’s scaling efficiency with pixel count.

Q: At which resolution does the combo first show any risk of dropping below 60 FPS?

A: The data shows no resolution or preset where the average FPS falls below 72 FPS. The closest margin is at 4K Ultra, where the average is 72 FPS, leaving only a 12 FPS buffer above the playable threshold.

How This Combo Ranks

In the database of 3,716 tested hardware combinations for Inside, this pairing sits at rank 1863. That places it almost exactly in the middle of the distribution — the 50th percentile mark. The percentileVsAllGpus of 61 for the RTX 4060 and the percentileVsAllCpus of 83 for the 7800X3D would suggest a stronger position, but the game’s low system requirements mean that even modest hardware can reach the 60 FPS cap, compressing the rank distribution. The absolute performance is high — the measured FPS values are all above 60 — but the rank reflects the fact that many older or lower-end components also achieve playable results in this title.

The combo’s rank relative to its own parts is notable. The CPU’s 83rd percentile means it outperforms 83% of all CPUs, yet the combo rank is only 50th percentile. This indicates that the RTX 4060, despite its 61st percentile, is the limiting component in this pairing. The GPU’s average benchmark score of 17639 places it in the 61st percentile, which aligns with its mid-range status. In contrast, the CPU’s average benchmark score of 33079 is in the 83rd percentile. The rank of 1863 out of 3716 thus reflects a solidly average overall system for this specific title, where the CPU’s strength is underutilized.

Similar Performance Alternatives

The nearest rivals for the CPU are all within a 0.4% performance margin. The AMD Ryzen 7 8700G, Intel Core i7-13650HX, and AMD Ryzen 7 7745HX all show a delta percentage of 0 versus the 7800X3D’s average score of 33079. This means in CPU-bound tasks, these four processors would deliver nearly identical frame rates in Inside. The AMD Ryzen 9 PRO 6950H has a delta of -0.4%, so it would be marginally slower, but the difference is negligible for a game running at over 70 FPS. For users looking for similar CPU behavior, any of these three alternatives would produce the same average FPS in this title.

On the GPU side, the nearest rivals are surprising — they are not modern gaming cards. The AMD Radeon HD 7790, AMD Radeon 780M, AMD Radeon Pro 560, and AMD Radeon Pro 460 are all within 0.7% of the RTX 4060’s average score. This indicates that the RTX 4060’s raw 3D performance is closely matched by these older or integrated parts, at least in the synthetic benchmark. However, this does not imply the same game playability, as the RTX 4060 has 8 GB of GDDR6 memory and 272.0 GB/s bandwidth, which exceeds the memory bandwidth of the older rivals. For Inside, the data shows that these rival GPUs would produce nearly identical average FPS, but the RTX 4060’s advantage would only show in the minimum or maximum frame deltas, which are not measured for all presets.

The pair of CPU and GPU rivals suggests that a system with a Ryzen 7 8700G and a Radeon HD 7790 could theoretically match the measured average FPS at every preset, assuming no memory bandwidth bottlenecks. The RTX 4060’s 272.0 GB/s bandwidth is 2.5 times higher than the HD 7790’s, but since Inside is not bandwidth-intensive, the deltaPct of 0.2% is what matters in the database.

The Verdict

This combination of AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 4060 is fully capable of running Inside at every resolution and preset measured. At 1920x1080, the highest preset (Ultra) averages 159 FPS, which is 2.65 times the 60 FPS threshold. At 2560x1440, Ultra averages 114 FPS, still nearly double the target. At 3840x2160, Ultra averages 72 FPS, which is just 12 FPS above the threshold. The data shows that the minimum FPS at the most demanding setting is not recorded, but the average of 72 FPS for 4K Ultra indicates a stable experience. The verdict for all three resolutions is the same: playable. The lowest average FPS across all tests is 72 FPS, meaning the system never dips below the 60 FPS playable threshold in the measured data.

The CPU’s 8 cores and 16 threads are overkill for this game, but they ensure no bottleneck. The GPU’s 3072 shading units and 15.11 TFLOPS deliver enough raw compute for 4K Ultra. The combination ranks in the middle of all tested combos, but that rank is a reflection of the game’s low requirements rather than a deficiency. For a player seeking to run Inside at 4K with maximum visual quality, this combo delivers a smooth 72 FPS average. For those targeting 1080p or 1440p, the system provides 159 FPS and 114 FPS at Ultra, respectively, with enough headroom to enable vsync at high refresh rates.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 159 FPS. There is no benefit to dropping below Ultra, as the FPS difference between Ultra and High is only 8 FPS (159 vs 167), and both are far beyond the 60 FPS mark.

At 2560x1440, Ultra is also the best setting, delivering an average of 114 FPS. This is 54 FPS above the threshold, so the system can handle the maximum visual quality while maintaining a high frame rate.

At 3840x2160, Ultra remains the best setting, with an average of 72 FPS. This is only 12 FPS above the threshold, so users who want a larger FPS buffer could drop to High for 75 FPS, but the data shows that Ultra is still comfortably playable. The choice between High and Ultra at 4K is a trade-off of 3 FPS, which is minor. All other presets at 4K (Low and Medium) are also above 60 FPS, with Medium averaging 120 FPS and Low at 150 FPS. Thus, the recommended settings are: Ultra for 1920x1080, Ultra for 2560x1440, and Ultra for 3840x2160, with the caveat that the 4K Ultra margin is the narrowest.