Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 59 | 62 | 102 | 128 |
| 1440p QHD | 100 | 100 | 164 | 207 |
| 1080p Full HD | 133 | 142 | 225 | 282 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 7 7700X paired with the AMD Radeon RX 7600 is a well-matched mid-range combination for running Inside, a 2016 Puzzle Platformer. The benchmark data shows this system delivers playable frame rates across all tested resolutions and presets, with the RX 7600 acting as the primary performance driver given the game's age and modest CPU demands. Below is a detailed analysis of how this specific CPU-GPU pairing behaves, how it compares to nearby hardware, and which settings provide the smoothest experience.
Similar Performance Alternatives
The Ryzen 7 7700X sits in the 85th percentile of all CPUs tested, with an average benchmark score of 35,909. Its closest rivals in synthetic testing are nearly indistinguishable in raw compute performance. The AMD Ryzen 7 PRO 5845 scores 35,802, which is just 0.3% lower, while the Intel Core 7 250H (35,728) and AMD Ryzen AI 7 PRO 350 (35,719) are both 0.5% behind. The Intel Core Ultra 9 185H trails by 0.7% with a score of 35,670. For Inside, these differences are negligible—any of these processors would deliver identical frame rates, since the game's workload is far below what even a mid-range desktop CPU can saturate.
On the GPU side, the Radeon RX 7600 achieves an average benchmark score of 15,171, placing it in the 57th percentile of all GPUs. Its nearest rivals show an interesting mix of generations and tiers. The NVIDIA GeForce RTX 3050 OEM scores 15,199, which is 0.2% higher than the RX 7600, making it a direct performance equivalent. The AMD Radeon 680M integrated graphics scores 15,270, 0.7% higher, though this is a mobile-class part that would not be used for a desktop build. The AMD Radeon Pro 560X (15,082) and NVIDIA GeForce GTX 660 Ti (15,063) are 0.6% and 0.7% lower respectively, representing older architectures that still land within 1% of the RX 7600 in synthetic benchmarks.
For Inside specifically, the GPU comparisons matter more than the CPU ones. The RTX 3050 OEM would produce nearly identical FPS at every resolution and preset, since the 0.2% score difference translates to less than one frame per second in real gameplay. The GTX 660 Ti, despite being over a decade old, is close enough in synthetic scores that it would also handle the game at 60+ FPS, though driver support and feature set would be inferior. The practical takeaway is that anyone with a GPU in this performance band—roughly 15,000 to 15,300 average score—should expect the same experience as the RX 7600 in Inside.
FAQ
*Q: Can this PC run Inside at 4K resolution?*
A: Yes, the data shows playable performance at 3840x2160. High settings average 62 FPS, Medium averages 102.3 FPS, and Low averages 128.3 FPS. Ultra settings drop to 59 FPS, which just misses the 60 FPS threshold.
Q: What is the best settings preset for 1440p gameplay?
A: At 2560x1440, Ultra settings are fully playable with an average of 100 FPS. This is the most demanding preset that stays above 60 FPS, and it still leaves significant headroom for frame drops.
Q: How does the RX 7600 compare to its nearest GPU rival for this game?
A: The NVIDIA GeForce RTX 3050 OEM scores 0.2% higher in synthetic benchmarks. In Inside, this would translate to a negligible difference of roughly 0.1-0.5 FPS depending on the resolution, so the two cards are effectively interchangeable.
Q: Is the Ryzen 7 7700X overkill for this game?
A: The benchmark data suggests yes. The CPU's nearest rivals, which score 0.3% to 0.7% lower, would produce identical frame rates. Inside is a lightweight game, and the 7700X's multi-core performance (19,088 in Cinebench R23 multi-core) is far beyond what this title requires.
Q: What frame rate can I expect at 1080p with Ultra settings?
A: The measured average is 132.5 FPS. This is the second-highest result across all tested configurations, trailing only the Low preset's 282.1 FPS average.
Q: Does the game ever drop below 60 FPS in any tested configuration?
A: No. The lowest measured average is 59 FPS at 4K Ultra, which is exactly 1 FPS below the playable threshold. Every other preset and resolution combination stays at or above 62 FPS.
CPU and GPU Roles
The performance scaling in Inside reveals a clear pattern: the GPU is the dominant component at every resolution, while the CPU's role is essentially static. Looking at the frame rate progression from 1080p to 4K at the same settings, the impact of resolution scaling is substantial. At High settings, the system delivers 141.5 FPS at 1920x1080, drops to 99.9 FPS at 2560x1440 (a 29.4% reduction), and falls further to 62 FPS at 3840x2160 (a 56.2% reduction from 1080p). This steep decline directly correlates with pixel count and GPU workload, not CPU limitations.
The preset scaling within each resolution reinforces this conclusion. At 4K, going from Low to Ultra reduces performance from 128.3 FPS to 59 FPS—a 54% drop. At 1440p, the same preset change goes from 207 FPS to 100 FPS (51.7% drop). At 1080p, Low to Ultra goes from 282.1 FPS to 132.5 FPS (53% drop). The consistency of this ~52-54% scaling across resolutions indicates that the GPU's shading units, texture units, and memory bandwidth are being taxed uniformly, with no CPU bottleneck emerging even at the lowest resolution.
The Ryzen 7 7700X, with its 8 cores and 16 threads, never becomes the limiting factor. Even at 1080p Low, where the game would be most CPU-bound, the system produces 282.1 FPS—far above any display refresh rate. If the CPU were a constraint, we would expect to see diminishing returns as resolution decreases, but the data shows linear scaling with GPU load. For Inside, the RX 7600's 8 GB GDDR6 memory and 2048 shading units determine playability, while the CPU's contribution is effectively constant across all test scenarios.
The Verdict
This PC can run Inside with playable performance at every tested resolution and preset, with one minor exception. At 3840x2160, the Ultra preset averages 59 FPS, falling 1 FPS short of the 60 FPS playable threshold. However, High settings at 4K achieve 62 FPS, so even at the highest resolution, the game is fully playable with a single-step preset reduction. At 2560x1440 and 1920x1080, every preset—including Ultra—clears the 60 FPS bar by a wide margin. The verdict data confirms playable settings at 4K include Low, Medium, and High; at 1440p and 1080p, all four presets (Low, Medium, High, Ultra) are playable. The best 4K preset is High at 62 FPS, the best 1440p preset is Ultra at 100 FPS, and the best 1080p preset is Ultra at 132.5 FPS.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest frame rates. Low settings average 282.1 FPS, Medium averages 225.1 FPS, High averages 141.5 FPS, and Ultra averages 132.5 FPS. The gap between High and Ultra is just 9 FPS, suggesting the Ultra preset's additional effects are relatively light. The step from Medium to High is larger, a 37.2% reduction from 225.1 to 141.5 FPS, indicating that High enables more demanding visual features.
At 2560x1440, performance remains robust. Low settings average 207 FPS, Medium averages 164.2 FPS, High averages 99.9 FPS, and Ultra averages 100 FPS. Notably, High and Ultra produce nearly identical results here, with Ultra actually edging out High by 0.1 FPS, which is within measurement variance. This suggests that at 1440p, the GPU has enough headroom to handle Ultra's extra load without a measurable penalty.
At 3840x2160, the RX 7600 begins to feel the pressure. Low settings still average 128.3 FPS, and Medium manages 102.3 FPS. High drops to 62 FPS, which is exactly at the playable threshold, while Ultra falls to 59 FPS—the only sub-60 result in the entire dataset. The progression from Medium to High at 4K is a 39.5% reduction, and from High to Ultra a further 4.8% reduction, showing that the Ultra preset's incremental cost grows as pixel count increases.
How This Combo Ranks
The combination of the Ryzen 7 7700X and RX 7600 ranks 2,491 out of 3,716 tested combos for Inside, placing it in the 67th percentile of all systems tested for this game. This ranking reflects the fact that Inside is an older title with modest system requirements, so even a mid-range combo from 2022-2023 outperforms the majority of tested hardware. However, the rank also shows that many higher-end GPUs—such as those with 16 GB or more of VRAM and higher compute throughput—can push frame rates well beyond what this setup achieves, particularly at 4K Ultra where the RX 7600's 8 GB memory and 21.75 TFLOPS FP32 performance become limiting factors.
The rank is more indicative of the GPU's position than the CPU's. Since the 7700X is in the 85th percentile of all CPUs, the combo's 67th percentile ranking is dragged down by the RX 7600's 57th percentile GPU standing. In a game like Inside, where GPU load dominates, this makes sense. The combo sits above the median but below the top tier; systems with GPUs in the 80th percentile or higher would likely rank in the top 1,000 or better.
Best Settings per Resolution
For 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, with an average of 132.5 FPS. This leaves 72.5 FPS of headroom above the playable threshold, meaning that even in scenes with heavy particle effects or complex lighting, the frame rate is unlikely to dip below 60 FPS.
For 2560x1440, Ultra is also the best choice, averaging 100 FPS. The 40 FPS headroom provides a comfortable margin, and the fact that Ultra (100 FPS) essentially matches High (99.9 FPS) at this resolution makes Ultra the obvious pick—there is no performance cost for the higher preset.
For 3840x2160, High is the most demanding playable preset, averaging 62 FPS. This is only 2 FPS above the 60 FPS threshold, so users who are sensitive to frame drops should consider Medium (102.3 FPS) for a more stable experience. Ultra at 59 FPS is not recommended, as it falls below the playable threshold, but the margin is so narrow that a small overclock or driver update could potentially push it over 60 FPS. The data shows that 4K High is the maximum reliable setting, while 4K Medium offers a much safer buffer without sacrificing substantial visual quality.