Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 66 | 64 | 102 | 130 |
| 1440p QHD | 100 | 108 | 166 | 208 |
| 1080p Full HD | 138 | 146 | 232 | 294 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 7 7700 paired with the AMD Radeon RX 7600 XT delivers consistently high frame rates in Inside, a 2016 puzzle platformer. The benchmark data shows this combination is far beyond what the game demands, with every tested preset at every resolution remaining above the 60 FPS playability threshold. The weakest result is at 4K Ultra with an average of 65.7 FPS, while the strongest is at 1080p Low at 294.1 FPS. Because the game is not graphically intensive, the GPU’s 16 GB of VRAM and the CPU’s high single-thread performance are both more than sufficient. The following analysis details how this combo compares to similar hardware, where it ranks among tested combinations, and how to choose settings based on measured data.
Similar Performance Alternatives
The CPU’s average benchmark score places it near several other processors, with deltas of less than 1%. The AMD Ryzen AI 9 365 scores 40,048, which is 0.1% higher than the Ryzen 7 7700’s 40,081 average. The Intel Core 5 221E is effectively a tie, scoring 40,144, a -0.2% delta. The AMD Ryzen 9 270 sits at 40,246 (-0.4%), and the Intel Core i9-13905H at 40,313 (-0.6%). In practice, swapping the Ryzen 7 7700 for any of these would yield nearly identical Inside performance, since the game’s frame rates are likely bottlenecked by the GPU at higher resolutions and by engine limits at lower ones. All four rivals fall within a 0.6% band, so none would push the measured FPS in a meaningful way.
On the GPU side, the RX 7600 XT’s average score of 17,083 is matched closely by the NVIDIA GeForce GTX 690 at 17,037 (0.3% higher) and the AMD Radeon HD 7970M at 17,019 (0.4% higher). The NVIDIA GeForce RTX 3070 scores 17,208, which is 0.7% higher, while the NVIDIA Tesla M4 trails at 16,932, a 0.9% delta. These rivals are all within a single percentage point, meaning a system with an RTX 3070 would likely produce average FPS within a small margin of the RX 7600 XT in Inside. However, the RX 7600 XT’s 16 GB memory buffer is unique among these near-equal performers; the GTX 690, HD 7970M, and Tesla M4 are older architectures with far less VRAM, which could matter in other games but does not affect Inside at these settings.
The data indicates that the Ryzen 7 7700’s 8-core, 16-thread configuration and 32 MB of shared L3 cache are not a limiting factor. Its Cinebench R23 multi-core score of 18,760 and single-core score of 1,930 suggest strong headroom. The RX 7600 XT, with 2,048 shading units and a 128-bit memory bus delivering 288 GB/s, is likewise overqualified. For Inside, a buyer choosing any of the listed rivals would see no practical difference in playability, as all exceed 60 FPS at maximum settings.
How This Combo Ranks
Among 3,716 tested CPU-GPU combinations, this pairing ranks 2,408th for Inside. That places it in the lower half of the database, which is counterintuitive given the high absolute frame rates. The rank reflects the fact that Inside is a lightweight title, so many older or weaker combos also achieve very high FPS. The percentile position is a relative measure against all tested hardware, not an indication of poor performance. In absolute terms, the combo delivers 138 FPS at 1080p Ultra and 100 FPS at 1440p Ultra, which are excellent results.
The rank of 2,408 means roughly 35% of tested combos perform better, but those are likely systems with flagship GPUs that push frame rates even higher at 1080p or 1440p. For example, a combo with an RTX 4090 might hit 500+ FPS at 1080p Low, skewing the ranking. The practical takeaway is that this pairing sits comfortably in the playable range at all settings, and the rank is more informative when compared to the CPU and GPU percentiles individually. The CPU scores in the 87th percentile among all CPUs, while the GPU is in the 60th percentile. The combo rank being lower than both suggests that Inside is not demanding enough to fully utilize either component, leaving performance headroom unused.
At 4K, the combo still ranks well in absolute terms: 64.3 FPS at High and 65.7 FPS at Ultra. The gap between High and Ultra at 4K is only 1.4 FPS, which indicates the GPU is the limiting factor at that resolution. At 1080p, the gap between Low (294.1 FPS) and Ultra (138 FPS) is 156 FPS, showing that settings have a much larger impact at lower resolutions. This combo is not a top-tier performer in the database, but it is more than sufficient for Inside on any common display.
Measured FPS Breakdown
The measured FPS data covers three resolutions and four quality presets, with all results reported as averages. No minimum or maximum frame rates are provided, so the analysis relies solely on average values.
At 1920x1080, the combo produces:
- Low: 294.1 FPS
- Medium: 231.8 FPS
- High: 146.4 FPS
- Ultra: 138 FPS
The step from Low to Medium reduces frame rate by 62.3 FPS (21.2%), while the step from Medium to High cuts 85.4 FPS (36.8%). The High to Ultra drop is only 8.4 FPS, indicating diminishing returns beyond High. The 1080p results are all far above the 60 FPS threshold, so any preset is playable.
At 2560x1440:
- Low: 207.7 FPS
- Medium: 166.4 FPS
- High: 108.2 FPS
- Ultra: 100 FPS
The scaling from 1080p to 1440p at Low is a 86.4 FPS reduction (from 294.1 to 207.7), which is a 29.4% drop. At Ultra, the drop is 38 FPS (from 138 to 100), a 27.5% reduction. The relative consistency suggests the GPU is handling the increased pixel count without a dramatic bottleneck. All 1440p presets exceed 100 FPS, so even Ultra is far beyond playable.
At 3840x2160:
- Low: 130.1 FPS
- Medium: 102.3 FPS
- High: 64.3 FPS
- Ultra: 65.7 FPS
The 4K results show a larger sensitivity to settings. Low to Medium drops 27.8 FPS, Medium to High drops 38 FPS, and High to Ultra actually increases by 1.4 FPS. This anomaly suggests that the Ultra preset may not be significantly more demanding than High for this title, or the measurement variance is within a couple FPS. The 4K Ultra result of 65.7 FPS is the lowest recorded in the entire dataset, yet it still clears the 60 FPS threshold.
Comparing across resolutions, the performance scaling is roughly linear with pixel count. At Ultra, 1080p yields 138 FPS, 1440p yields 100 FPS (72.5% of 1080p), and 4K yields 65.7 FPS (47.6% of 1080p). This aligns with the pixel ratios: 1440p has 1.78x the pixels of 1080p, and 4K has 4x. The GPU is clearly the primary constraint at higher resolutions, but the CPU’s strong single-thread performance keeps 1080p frame rates very high.
FAQ
*Q: Can this combo run Inside at 4K Ultra?*
A: Yes. The measured average FPS at 3840x2160 Ultra is 65.7, which is above the 60 FPS playable threshold. This is the most demanding preset tested, and it still delivers playable performance.
Q: What is the best settings preset at 1440p?
A: Ultra is the best settings preset at 2560x1440, with an average of 100 FPS. All four presets (Low, Medium, High, Ultra) are playable, but Ultra provides the highest visual quality while maintaining 100 FPS.
Q: How much faster is 1080p compared to 4K?
A: At Ultra settings, 1920x1080 averages 138 FPS, while 3840x2160 averages 65.7 FPS. That is a 72.3 FPS difference, meaning 1080p is about 2.1 times faster than 4K at the same preset.
Q: Is the GPU or CPU more important for this game?
A: At 1080p, the CPU’s strong single-thread performance (3DMark single-thread score of 1,049) helps push frame rates above 290 FPS at Low. At 4K, the GPU becomes the limiting factor, as evidenced by the much smaller gap between High and Ultra (1.4 FPS). The data indicates the GPU matters more at higher resolutions.
*Q: Does the RX 7600 XT’s 16 GB VRAM matter for Inside?*
A: No. The game is from 2016 and does not require significant VRAM. The measured FPS at 4K Ultra is 65.7, which is not VRAM-limited. The 16 GB buffer is useful for other modern titles, but it does not affect Inside performance.
Q: How does this combo rank against all tested systems?
A: It ranks 2,408th out of 3,716 combos for Inside. This places it in the lower half of the database, but the absolute frame rates are high because Inside is not a demanding game. The rank is relative, not a measure of playability.
CPU and GPU Roles
The scaling data reveals how the CPU and GPU divide responsibilities across resolutions. At 1080p, the combo achieves 294.1 FPS on Low and 138 FPS on Ultra. The large spread between presets suggests the GPU is doing most of the work, but the CPU’s single-core performance (3DMark single-thread score of 1,049, Geekbench single-core of 2,525) prevents any bottleneck at these high frame rates. A weaker CPU would likely cap frame rates below 200 FPS at 1080p Low, but this Ryzen 7 7700 has enough headroom.
Moving to 1440p, the frame rates drop by roughly 27-29% across all presets. This is consistent with the pixel count increase, indicating that the GPU is scaling as expected. The CPU is still not a limiting factor, as the 1440p Low result of 207.7 FPS is well above what a mid-range CPU could sustain. At 1440p Ultra, the 100 FPS average is likely GPU-bound, but the CPU still has headroom.
At 4K, the picture changes. The 4K Low result of 130.1 FPS is still very high, but the 4K Ultra result of 65.7 FPS shows the GPU nearing its limit. The difference between 4K High (64.3 FPS) and 4K Ultra (65.7 FPS) is negligible, which suggests the GPU is the primary constraint at this resolution. The CPU’s role diminishes as resolution increases, because the GPU takes longer to render each frame. The data indicates that at 1080p and 1440p, the CPU contributes significantly to achieving triple-digit frame rates, while at 4K, the GPU is the dominant factor.
The presets also show a pattern. The gap between Low and Ultra is largest at 1080p (156 FPS) and smallest at 4K (64.4 FPS). This is typical: lower resolutions are more CPU-bound, while higher resolutions are more GPU-bound. For Inside, the CPU’s 8-core/16-thread design and 5.3 GHz boost clock are overkill, but they ensure that the GPU is never waiting on the processor.
Best Settings per Resolution
For each resolution, the best settings preset is the one that offers the highest visual quality while staying at or above 60 FPS. All presets at all resolutions meet this criterion, so the choice is simply the highest preset.
At 1920x1080, the best settings are Ultra, with an average of 138 FPS. This is 78 FPS above the 60 FPS threshold, so there is substantial headroom. Even with future driver updates or background tasks, the frame rate should remain playable.
At 2560x1440, the best settings are also Ultra, averaging 100 FPS. This is 40 FPS above the threshold, providing a comfortable margin. The 100 FPS average is smooth for most displays, and the Ultra preset ensures maximum visual fidelity for the game’s art style.
At 3840x2160, the best settings are Ultra, with an average of 65.7 FPS. This is just 5.7 FPS above the 60 FPS threshold, so it is playable but with less margin. For a 4K display, this is the highest quality option that remains playable. The High preset at 4K averages 64.3 FPS, which is nearly identical, so users could choose either without a noticeable difference in smoothness.
In summary, this combo runs Inside at Ultra settings at every resolution, with the lowest result being 65.7 FPS at 4K. The data confirms that neither the CPU nor the GPU is a weak point for this title, and users can max out all settings without concern. The only caveat is that 4K Ultra is close to the 60 FPS line, so users with 4K displays should ensure their system is properly cooled to maintain boost clocks.