Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 88 | 89 | 143 | 178 |
| 1440p QHD | 135 | 144 | 230 | 289 |
| 1080p Full HD | 192 | 196 | 299 | 322 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 3070 Ti delivers an overwhelming performance envelope for Inside, a 2016 puzzle platformer that places minimal stress on modern hardware. The measured data shows this combination producing frame rates that far exceed the 60 FPS playable threshold at every resolution and preset tested. The following analysis breaks down the exact measured FPS, the balance between CPU and GPU roles, optimal settings per resolution, and how this specific pairing ranks against other tested combinations.
Measured FPS Breakdown
The benchmark results provide average FPS figures for four presets (Low, Medium, High, Ultra) across three resolutions. No minimum or maximum FPS values were recorded in the data, so the analysis relies entirely on average frame rates.
At 1920x1080, the results are exceptionally high across the board. The Low preset produces an average of 322.1 FPS, which is the single highest frame rate recorded for this combination. The Medium preset follows closely at 299.4 FPS, while High drops slightly to 196.4 FPS. The Ultra preset yields 191.6 FPS. The difference between Low and Ultra is substantial — approximately 130 FPS — but even the most demanding preset at 1080p nearly triples the 60 FPS threshold.
Moving to 2560x1440, the performance remains overwhelming. Low preset hits 288.9 FPS, Medium delivers 230.2 FPS, and High reaches 143.5 FPS. Ultra at 1440p produces 134.5 FPS. The scaling from 1080p to 1440p is consistent: each preset loses roughly 30-35% of its average frame rate, which is expected given the increased pixel count. The gap between Low and Ultra here is about 154 FPS, showing that the preset choice has a larger relative impact at this resolution.
At 3840x2160, the results still clear the playable threshold comfortably. Low preset achieves 177.6 FPS, Medium drops to 143.3 FPS, High falls to 89.4 FPS, and Ultra produces 87.6 FPS. The jump from 1440p to 4K is steep — High loses about 54 FPS and Ultra loses about 47 FPS. The Low preset at 4K still exceeds 170 FPS, indicating that the GPU has ample headroom even at the highest pixel count. The spread between Low and Ultra at 4K is roughly 90 FPS, which is narrower than at lower resolutions.
The data shows a clear pattern: the RTX 3070 Ti is never the limiting factor in Inside. Even at 4K Ultra, the average FPS of 87.6 remains well above the 60 FPS target. The most significant performance delta occurs between Medium and High presets at every resolution, suggesting that High introduces rendering features that cost more than the step from Low to Medium.
CPU and GPU Roles
The division of labor between the AMD Ryzen 7 5800XT and the NVIDIA GeForce RTX 3070 Ti in Inside is heavily skewed toward the GPU, but the CPU’s capability ensures no bottleneck emerges. The Ryzen 7 5800XT is an 8-core, 16-thread processor based on Zen 3 architecture with a boost clock of 4.80 GHz. Its multi-threaded benchmark results — including a Cinebench R23 multi-core score of 23794 and a Passmark multithread score of 28053 — indicate that it can feed the GPU with draw calls and game logic without breaking a sweat, particularly in a game as lightweight as Inside.
The scaling between resolutions confirms the GPU-centric nature of the workload. From 1080p to 1440p, the average FPS across all presets drops by approximately 30-35%. From 1440p to 4K, the drop is steeper, ranging from 35% to 50% depending on the preset. This pattern is typical for a GPU-bound scenario: as resolution increases, the number of pixels the GPU must shade multiplies, while the CPU’s workload (game logic, physics, draw calls) remains roughly constant.
The fact that 1080p Low achieves 322.1 FPS while 4K Ultra achieves 87.6 FPS — a 3.7x difference — demonstrates that the GPU is the primary determinant of performance. If the CPU were the limiting factor, we would expect to see frame rates plateau at higher resolutions rather than decline so predictably. The Ryzen 7 5800XT’s single-thread performance (Passmark single-thread score of 3535 and 3DMark single-thread score of 959) is more than adequate for a puzzle platformer that does not rely on complex AI or physics simulations.
Preset selection also plays into the CPU/GPU balance. The difference between Low and Medium at 1080p is only about 23 FPS, while the difference between Medium and High is roughly 103 FPS. This suggests that High enables effects that are GPU-intensive, such as higher-resolution shadows or post-processing, without adding meaningful CPU load. At 4K, the same preset steps show a similar pattern: Low to Medium costs about 34 FPS, while Medium to High costs about 54 FPS. The CPU’s role remains constant; it simply feeds the GPU with instructions regardless of the graphical settings.
The data indicates that in Inside, the RTX 3070 Ti is the component to watch. The Ryzen 7 5800XT provides more than enough throughput to avoid holding back the GPU at any resolution. For a game with this low a system requirement, the CPU’s percentile rank of 81 versus all CPUs is largely irrelevant; even a mid-range CPU would likely suffice, but this pairing ensures zero risk of CPU-induced stutters.
Best Settings per Resolution
Given the 60 FPS playable threshold, the best settings at each resolution are determined by finding the most demanding preset that still clears that bar. The benchmark data makes this straightforward — every preset at every resolution exceeds 60 FPS.
At 1920x1080, the Ultra preset delivers 191.6 FPS on average. This is the highest quality setting available, and it still produces more than triple the playable threshold. There is no reason to drop below Ultra at 1080p, as the performance headroom is enormous. Even the most demanding preset leaves approximately 131 FPS of headroom over the 60 FPS minimum.
At 2560x1440, the Ultra preset achieves 134.5 FPS. Again, this clears the 60 FPS threshold by a wide margin — more than double the requirement. The step down to High would yield 143.5 FPS, a gain of only 9 FPS, which is negligible when both are far above the playable line. Ultra is the unequivocal choice at 1440p, offering the highest visual fidelity without any meaningful performance compromise.
At 3840x2160, the Ultra preset produces 87.6 FPS. This is the only resolution where the frame rate approaches a range where some users might prefer a higher refresh rate over maximum quality. However, 87.6 FPS still clears the 60 FPS threshold by 27.6 FPS, making Ultra fully playable. The High preset at 89.4 FPS offers only a marginal 1.8 FPS improvement, so the visual benefits of Ultra outweigh the negligible performance difference. The verdict data confirms Ultra at 4K is the best setting, with an average FPS of 87.6.
In summary, the best settings are Ultra at every resolution. The RTX 3070 Ti handles Inside with such ease that the only reason to reduce settings would be to chase extremely high refresh rates on a 240Hz or 360Hz monitor, where the Low preset at 1080p (322.1 FPS) or 1440p (288.9 FPS) would be more appropriate.
How This Combo Ranks
The combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3070 Ti ranks 1263rd out of 3716 tested combos for Inside. This places it in the 66th percentile of all tested systems, meaning it outperforms roughly two-thirds of the combinations in the database. The rank is surprisingly modest given the absolute frame rates, which reflects the fact that Inside is a lightweight title where even older or lower-tier hardware can achieve high FPS.
The combo’s rank is influenced more by the GPU’s 75th percentile standing among all GPUs than the CPU’s 81st percentile among all CPUs. The RTX 3070 Ti’s benchmark scores — including a Passmark G3D score of 23356 and a Geekbench Vulkan score of 139541 — place it in the upper quartile of graphics cards. The Ryzen 7 5800XT’s Cinebench R23 multi-core score of 23794 and its Passmark multi-thread score of 28053 are similarly strong. Yet because Inside is not demanding, the ranking is compressed: many combinations with less powerful hardware also achieve high FPS, so the relative separation between tiers is small.
The rank of 1263 out of 3716 indicates that this pairing is solidly above average but not at the very top. For a game like Inside, the top-ranked combos likely consist of the most recent flagship CPUs and GPUs, which would produce even higher frame rates at 4K Ultra. However, the practical difference between this combo and a top-100 combo is minimal — both will run the game at hundreds of FPS at 1080p and well above 60 FPS at 4K. The data shows that the combo’s rank is a function of its hardware class, not any deficiency in real-world performance for this specific title.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU provide a clear picture of what other hardware would perform nearly identically. For the AMD Ryzen 7 5800XT, the closest alternatives are the AMD Ryzen 7 7840H (deltaPct 0%), the AMD Ryzen 7 8845HS (deltaPct -0.3%), the AMD Ryzen 7 7840HS (deltaPct -0.3%), and the AMD Ryzen 5 9600X (deltaPct 0.6%). These processors have average benchmark scores within 0.6% of the Ryzen 7 5800XT, meaning that swapping to any of them would produce virtually identical frame rates in Inside. The Ryzen 7 7840H matches the 5800XT exactly in average score (29868 vs 29879), while the 8845HS and 7840HS are a hair slower, and the Ryzen 5 9600X is a hair faster.
For the NVIDIA GeForce RTX 3070 Ti, the nearest rivals are the NVIDIA GeForce RTX 5070 Mobile (deltaPct 0.1%), the AMD Radeon RX 6800 (deltaPct -0.5%), the NVIDIA GeForce RTX 2080 Ti (deltaPct 0.5%), and the AMD Radeon RX 6700 (deltaPct -1.6%). The RTX 5070 Mobile is the closest match, with an average score of 29928 versus the RTX 3070 Ti’s 29945. The RX 6800 is slightly faster (30095), while the RTX 2080 Ti is slightly slower (29783) and the RX 6700 is notably slower (30433 is the average score, but the deltaPct is -1.6%, meaning it underperforms the 3070 Ti by 1.6%).
If a builder were to substitute the CPU with a Ryzen 7 7840H or the GPU with an RTX 5070 Mobile, the measured FPS in Inside would be nearly indistinguishable from the data presented here. The 0.1% delta between the RTX 3070 Ti and RTX 5070 Mobile translates to less than 1 FPS at any resolution. Similarly, the 0.6% delta between the Ryzen 7 5800XT and Ryzen 5 9600X would shift frame rates by only a fraction of a percent. The conclusion is that this combo sits in a dense cluster of similarly performing hardware, and any of these alternatives would deliver the same experience: effortless 60+ FPS at all settings.
The Verdict
The data is unambiguous: *this PC can run Inside at every resolution and preset combination tested, with massive headroom above the 60 FPS playable threshold.*
At 3840x2160, the verdict lists all four presets — High, Low, Medium, and Ultra — as playable. The best setting is Ultra, which averages 87.6 FPS. This is 27.6 FPS above the playable threshold, meaning even the most demanding configuration at 4K runs smoothly.
At 2560x1440, the same verdict applies: all presets are playable, and Ultra is the best setting with an average of 134.5 FPS. This is more than double the 60 FPS requirement, leaving ample room for frame rate dips without ever approaching the threshold.
At 1920x1080, Ultra is again the best setting, delivering 191.6 FPS. This is over three times the playable threshold, making the game feel exceptionally fluid on any monitor, including high-refresh-rate panels.
The only caveat is that the data does not include minimum or maximum FPS values, so there is no information about frame pacing or occasional stutters. However, given that average FPS at 4K Ultra is 87.6 and the game is a 2D-style puzzle platformer with limited complexity, it is reasonable to expect consistent frame delivery. For anyone using this Ryzen 7 5800XT + RTX 3070 Ti combination, Inside will run at maximum settings with performance to spare. The hardware is far more capable than this game demands, making it a flawless pairing for the title.