Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 59 | 64 | 101 | 130 |
| 1440p QHD | 99 | 103 | 163 | 205 |
| 1080p Full HD | 132 | 142 | 227 | 279 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3060 Ti combination delivers a robust experience in Inside, a Puzzle Platformer released on 2016-07-06. Benchmark data, measured directly rather than estimated, shows this pairing handles the game with high frame rates across all tested resolutions. At 1920x1080, the average FPS never drops below 131.9 even at the Ultra preset, while 2560x1440 maintains an average of 99.1 FPS at Ultra. The most demanding scenario, 3840x2160 Ultra, yields an average of 58.8 FPS, just under the 60 FPS playable threshold. The data indicates this combo ranks 2491 out of 3716 tested combinations for this game.
FAQ
Q: What is the highest resolution and preset that maintains an average FPS above 60?
A: At 3840x2160, the High preset averages 63.9 FPS, which exceeds the 60 FPS threshold. The Ultra preset at this resolution falls short with 58.8 FPS average.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 7 5800XT has an average benchmark score of 29879. Its closest rival, the AMD Ryzen 7 7840H, scores 29868, a delta of 0%. The AMD Ryzen 7 8845HS and 7840HS both score 29955, which is -0.3% relative to the 5800XT.
Q: What is the performance gap between Low and Ultra settings at 1920x1080?
A: At 1920x1080, the Low preset averages 279.1 FPS, while Ultra averages 131.9 FPS. This represents a drop of 147.2 FPS when moving from Low to Ultra, indicating the game is highly scalable with settings.
Q: Is the RTX 3060 Ti considered a high-performing GPU in the database?
A: The RTX 3060 Ti has a percentile rank of 59 against all GPUs, with an average benchmark score of 16129. Its nearest rival, the AMD Radeon RX 9060, scores 16014, which is 0.7% lower.
Q: Which component shows a larger performance delta when comparing synthetic scores?
A: The CPU's average score of 29879 places it in the 81st percentile among all CPUs. The GPU's average score of 16129 places it in the 59th percentile among all GPUs, indicating the CPU is relatively stronger in this pairing.
Q: Does the game support high refresh rates at 2560x1440?
A: Yes. At 2560x1440, the Medium preset averages 163.4 FPS, High averages 103.1 FPS, and Ultra averages 99.1 FPS. All of these exceed the 60 FPS threshold and are suitable for high refresh rate displays.
Similar Performance Alternatives
For the CPU, the AMD Ryzen 7 5800XT's average benchmark score of 29879 places it within a narrow band of comparable processors. The AMD Ryzen 7 7840H scores 29868, essentially identical with a delta of 0%. The AMD Ryzen 7 8845HS and AMD Ryzen 7 7840HS both achieve 29955, which is -0.3% relative to the 5800XT. The AMD Ryzen 5 9600X scores 29713, a 0.6% delta. In practice, these processors would deliver nearly indistinguishable performance in Inside, given the game's moderate CPU demands and the small score differences.
On the GPU side, the NVIDIA GeForce RTX 3060 Ti has an average benchmark score of 16129. The AMD Radeon RX 9060 scores 16014, a 0.7% delta, making it the closest match. The AMD Radeon Pro 5600M scores 16351, which is -1.4% relative to the RTX 3060 Ti. The AMD Radeon RX 5700 XT scores 16361, also -1.4%. The AMD Radeon R9 370X scores 15862, representing a 1.7% delta. These GPUs would produce similar frame rates in Inside, though the RX 5700 XT's slightly higher synthetic score suggests it might edge out the RTX 3060 Ti by a small margin in some scenarios.
The data shows that swapping either component for one of these near-equal rivals would not meaningfully change the gaming experience. The performance differences are within single-digit percentages, which translates to a few FPS in actual gameplay. For Inside, where the RTX 3060 Ti already achieves 131.9 FPS at 1080p Ultra, such small variations would be imperceptible.
Measured FPS Breakdown
At 3840x2160, the measured average FPS varies significantly across presets. The Low preset averages 129.6 FPS, Medium averages 101.4 FPS, and High averages 63.9 FPS. The Ultra preset averages 58.8 FPS, which is the only configuration at this resolution that fails to clear the 60 FPS threshold. The drop from High to Ultra is 5.1 FPS, while the jump from High to Medium is 37.5 FPS, showing diminishing returns at the highest settings.
At 2560x1440, all presets remain well above the playable threshold. Low averages 204.7 FPS, Medium averages 163.4 FPS, High averages 103.1 FPS, and Ultra averages 99.1 FPS. The difference between High and Ultra is a modest 4.0 FPS, suggesting that Ultra is nearly as efficient as High at this resolution. The scaling from Low to Ultra shows a reduction of 105.6 FPS, representing a 51.6% performance decrease.
At 1920x1080, the frame rates are exceptionally high. Low averages 279.1 FPS, Medium averages 226.6 FPS, High averages 142.3 FPS, and Ultra averages 131.9 FPS. The gap between High and Ultra is 10.4 FPS, which is the smallest relative difference among the three resolutions. Moving from Low to Ultra reduces the average by 147.2 FPS, a 52.7% drop. The minimum and maximum FPS values are not recorded in the data, so the analysis relies solely on average frame rates.
Across all resolutions, the pattern is consistent: Low settings provide the highest frame rates, while Ultra provides the lowest. The relative performance penalty for Ultra settings grows as resolution increases, from 52.7% at 1080p to 54.6% at 4K.
The Verdict
This PC can run Inside effectively at all three tested resolutions, with one exception. At 1920x1080, every preset—Low, Medium, High, and Ultra—delivers an average FPS above 60, with Ultra achieving 131.9 FPS. At 2560x1440, the same holds true, with Ultra reaching 99.1 FPS. The verdict data confirms all four settings are playable at both resolutions.
At 3840x2160, the situation changes. The High preset averages 63.9 FPS, which clears the 60 FPS threshold, making it the best playable setting at this resolution. The Low preset averages 129.6 FPS and Medium averages 101.4 FPS, both also playable. However, the Ultra preset drops to 58.8 FPS, which falls below the 60 FPS playable threshold. Therefore, at 4K, users should select High for the best visual quality while maintaining smooth performance. The verdict data lists High, Low, and Medium as playable settings at 3840x2160, with High being the best option at 63.9 FPS average.
CPU and GPU Roles
The scaling between resolutions and presets reveals the GPU's dominant role. At 1920x1080 Ultra, the average FPS is 131.9. At 2560x1440 Ultra, it drops to 99.1, a 24.9% decrease. At 3840x2160 Ultra, it falls to 58.8, a 40.7% decrease from 1440p. This consistent decline with increasing pixel count indicates the RTX 3060 Ti is the primary limiter at higher resolutions.
The CPU's influence is visible in the preset scaling at each resolution. At 1920x1080, moving from Low to Ultra reduces FPS by 147.2, from 279.1 to 131.9. At 2560x1440, the same preset change reduces FPS by 105.6, from 204.7 to 99.1. At 3840x2160, the reduction is 70.8 FPS, from 129.6 to 58.8. The absolute FPS drop from preset changes shrinks as resolution increases, which is typical for GPU-bound scenarios. However, the percentage drop remains relatively consistent, around 52-55%, indicating that the GPU handles the additional settings load proportionally.
The data suggests that at 1920x1080, the CPU has more headroom to feed the GPU, as evidenced by the 279.1 FPS at Low settings. At 3840x2160, the GPU becomes the clear bottleneck, as even Low settings only produce 129.6 FPS. For this game, the RTX 3060 Ti is the component that determines playability at 4K, while the Ryzen 7 5800XT provides ample processing power for all tested configurations.
How This Combo Ranks
This specific combination of AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3060 Ti ranks 2491 out of 3716 tested combos for Inside. This places it in the lower-middle portion of the ranking distribution, roughly in the 33rd percentile of all tested pairings. The rank reflects the GPU's position in the broader market; the RTX 3060 Ti has a percentile rank of 59 against all GPUs, while the CPU has a percentile rank of 81 against all CPUs.
The combination's rank is influenced more by the GPU than the CPU, given the game's visual nature. The CPU's strong synthetic scores—such as 23794 in Cinebench R23 multicore and 3359 in single-core—do not compensate for the GPU's mid-range standing. The RTX 3060 Ti's average benchmark score of 16129 is below many higher-tier cards, which explains why 2491 other combos achieve better performance in Inside. However, the rank still indicates that this combo outperforms roughly 33% of tested systems, and the measured FPS data confirms it delivers smooth gameplay at most settings.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains an average FPS at or above 60 is High, with an average of 63.9 FPS. This is the recommended setting for 4K play, as Ultra falls to 58.8 FPS, below the threshold. Medium and Low also exceed 60 FPS, but High offers the best visual quality while meeting the playability requirement.
At 2560x1440, the Ultra preset achieves an average of 99.1 FPS, making it the best playable setting. This provides the highest visual fidelity while maintaining a comfortable margin above the 60 FPS threshold. All lower presets—High, Medium, and Low—also clear 60 FPS, but Ultra is the optimal choice for this resolution.
At 1920x1080, the Ultra preset averages 131.9 FPS, allowing for maximum visual quality with substantial headroom above 60 FPS. This is the recommended setting for 1080p play. The data shows that even at Ultra, the system has significant performance reserves, making it suitable for high refresh rate displays up to 120 Hz or beyond.