Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

89%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
316 FPS
Ultra 1080p Measured
239 FPS

1440p (2K / QHD)

Low 1440p Measured
283 FPS
Ultra 1440p Measured
214 FPS

4K (Ultra HD)

Low 4K Measured
242 FPS
Ultra 4K Measured
153 FPS
4.1ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 29,123
Graphics Card
Required 27,118
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 153 160 224 242
1440p QHD 214 218 261 283
1080p Full HD 239 243 292 316

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 243
1920x1080 Low 316
1920x1080 Medium 292
1920x1080 Ultra 239
2560x1440 High 218
2560x1440 Low 283
2560x1440 Medium 261
2560x1440 Ultra 214
3840x2160 High 160
3840x2160 Low 242
3840x2160 Medium 224
3840x2160 Ultra 153

Performance Analysis: Inside on Your System

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce RTX 5090 D delivers an exceptional experience in Inside, a game that is far older than both components. Benchmark data shows this combination ranks 421st out of 3,716 tested combos for this title, placing it in the top 11.4% of all systems evaluated. That ranking is remarkable considering the hardware’s modern pedigree, but it also reflects the game’s modest demands. The CPU sits in the 81st percentile among all processors, while the GPU ranks in the 92nd percentile among all graphics cards, meaning both are elite performers in their respective categories. For a puzzle platformer released in 2016, the data reveals a system that is overwhelmingly overqualified, yet the measured frame rates confirm the pairing works flawlessly across every resolution and preset combination tested.

How This Combo Ranks

The combo’s 421st position out of 3,716 tested combinations might sound mid-pack, but context matters. Inside is a 2D side-scrolling puzzle game with modest visual fidelity, so most modern CPUs and GPUs will achieve high frame rates. The ranking reflects that nearly 89% of tested combos also perform admirably, but the raw FPS numbers tell the real story. At 4K Ultra, this system averages 153 FPS, which is 2.55 times the playable threshold of 60 FPS. At 1080p Low, it hits 316 FPS, more than five times the threshold. The percentile rankings for both components—81st for the CPU and 92nd for the GPU—indicate that this pairing sits well above the median system, and the benchmark scores corroborate that: the CPU’s average benchmark score is 29,123, while the GPU’s is 77,712.

What is striking is the headroom. The data shows that even at the most demanding setting tested (4K Ultra), the average frame rate never drops below 153 FPS. There are no minimum FPS values recorded for most settings, which suggests the game is so lightweight that frame pacing is consistent. The only settings with min/max data are Medium across all resolutions, where minimums range from 190 FPS at 4K to 248 FPS at 1080p. This indicates that even in the most variable scenarios, the system stays far above any playability concern. The ranking, therefore, is less about whether this combo can run the game and more about how it compares to other systems that also run it superbly—the delta between this combo and others in its rank neighborhood is likely measured in single-digit frame rates, not playability.

CPU and GPU Roles

Determining which component matters more for Inside requires examining how FPS scales across resolutions and presets. The data shows a clear pattern: the GPU becomes more influential at higher resolutions, while the CPU holds steady. At 1080p Low, the system produces 316 FPS. Moving to 1440p Low drops that to 283 FPS, a 10.4% reduction. At 4K Low, it falls to 242 FPS, another 14.5% drop. This scaling suggests that even at low settings, resolution increases burden the GPU, but the CPU’s 8 cores and 16 threads are never the bottleneck—the frame rates remain astronomically high regardless of resolution.

Preset scaling tells a similar story. At 4K, moving from Low to Medium reduces average FPS from 242 to 224, a 7.4% decline. From Medium to High, it drops to 160 FPS, a 28.6% reduction. High to Ultra brings 153 FPS, a mere 4.4% drop. The pattern repeats at 1440p: Low 283, Medium 261, High 218, Ultra 214. At 1080p: Low 316, Medium 292, High 243, Ultra 239. The largest jumps occur between Medium and High at every resolution, which is likely where the game enables more demanding visual effects. The CPU’s role is less visible in these numbers because even the weakest CPU scenario—likely a single-thread bottleneck—would still produce hundreds of FPS in this game. The GPU, however, shows measurable scaling, so it is the component that determines whether you get 153 FPS at 4K Ultra or 316 FPS at 1080p Low.

Similar Performance Alternatives

Looking at the nearest rivals for both components, several alternatives would produce nearly identical results in Inside. The CPU’s closest competitor is the Intel Core Ultra 5 135H, which scores an average benchmark of 29,093 versus the Ryzen 7 5800X’s 29,123—a delta of just 0.1%. In practical terms, these two CPUs are interchangeable for this game. The AMD Ryzen 5 5600XT is 0.6% slower, while the Intel Xeon Phi 7210 is 0.4% faster, and the Intel Core i5-13500HX is 0.5% faster. All four rivals sit within a 1.1% performance band, meaning any of them paired with the RTX 5090 D would deliver frame rates within a couple of FPS of each other in Inside.

On the GPU side, the AMD Radeon RX 6650M XT is the closest rival, with an average score of 76,904 versus the RTX 5090 D’s 77,712, a 1.1% difference. The AMD Radeon RX 6850M XT is 1.6% faster, and both NVIDIA Tesla P100 variants (12 GB and 16 GB) are 2.1% and 2.4% faster, respectively. These deltas are tiny, so a system with any of these GPUs and the Ryzen 7 5800X would produce nearly identical FPS in Inside. The practical takeaway: if you already own a Ryzen 7 5800X and are considering a GPU swap, the RTX 5090 D is not meaningfully different from these rivals in this specific game. Conversely, if you have one of those GPUs, upgrading to the RTX 5090 D will not unlock much additional performance in Inside—the game is simply too light to differentiate between these high-end parts.

The Verdict

Can this PC run Inside? The data answers with an unambiguous yes, at every resolution and preset combination tested. The playable threshold is 60 FPS, and the measured results range from a low of 153 FPS at 4K Ultra to a high of 316 FPS at 1080p Low. The verdict by resolution lists all four settings—Low, Medium, High, and Ultra—as playable at 2160p, 1440p, and 1080p. The best settings at each resolution are Ultra, with average FPS of 153 at 4K, 214 at 1440p, and 239 at 1080p. These numbers indicate that the system not only clears the 60 FPS bar but does so with a margin of at least 153% at the most demanding configuration.

The only caveat is that the data does not include minimum FPS for most settings, so there is a theoretical possibility of brief dips. However, the min FPS values that do exist—190 at 4K Medium, 222 at 1440p Medium, and 248 at 1080p Medium—are all more than triple the playable threshold. The game’s 2016 release date and 2D puzzle platformer genre suggest that even the most complex scenes will not stress this hardware. For anyone wondering whether this system can handle Inside, the answer is a definitive yes, with enough headroom to run the game at maximum settings on a 4K display without breaking a sweat.

Measured FPS Breakdown

The data provides exact average FPS for every resolution and preset, with min/max figures only for Medium settings. At 1920x1080, the results are: Low averages 316 FPS, Medium averages 292 FPS with a minimum of 248 and maximum of 335, High averages 243 FPS, and Ultra averages 239 FPS. Moving to 2560x1440, the numbers are: Low 283 FPS, Medium 261 FPS (min 222, max 300), High 218 FPS, and Ultra 214 FPS. At 3840x2160, the most demanding configuration, the system still delivers: Low 242 FPS, Medium 224 FPS (min 190, max 257), High 160 FPS, and Ultra 153 FPS.

The pattern across all resolutions shows that Medium is consistently the second-fastest preset, only slightly behind Low. At 1080p, Medium is 7.6% slower than Low; at 1440p, it is 7.8% slower; at 4K, it is 7.4% slower. High is the biggest step down, being 16.8% slower than Medium at 1080p, 16.5% at 1440p, and 28.6% at 4K. Ultra is nearly identical to High, with differences of 1.6% at 1080p, 1.8% at 1440p, and 4.4% at 4K. This suggests that High and Ultra presets share most rendering features, while Medium is a distinct step down in visual complexity. The min FPS values at Medium—190 at 4K, 222 at 1440p, 248 at 1080p—all exceed the playable threshold by more than 3x, confirming that even the worst-case frame pacing is smooth.

FAQ

*Q: Can this system run Inside at 4K Ultra settings?*

A: Yes. The measured average FPS at 3840x2160 Ultra is 153 FPS, which is 2.55 times the 60 FPS playable threshold. All four presets at 4K are listed as playable.

Q: What is the fastest preset at 1080p?

A: Low settings produce the highest average FPS at 1920x1080, with 316 FPS. Medium is close behind at 292 FPS, while High and Ultra deliver 243 and 239 FPS respectively.

Q: How much performance is lost when moving from 1080p to 4K?

A: At Low settings, 1080p averages 316 FPS while 4K averages 242 FPS, a 23.4% reduction. At Ultra, the drop is from 239 FPS to 153 FPS, a 36.0% reduction.

Q: Does the RTX 5090 D have any close rivals for this game?

A: The AMD Radeon RX 6650M XT scores 1.1% lower, while the AMD Radeon RX 6850M XT scores 1.6% higher. Both NVIDIA Tesla P100 variants are 2.1% and 2.4% higher, but none would produce meaningfully different FPS in Inside.

Q: Is the Ryzen 7 5800X a bottleneck at any resolution?

A: The data suggests no. The CPU’s nearest rival, the Intel Core Ultra 5 135H, is within 0.1% in average score, and even at 1080p Low where the CPU is most likely to be a factor, the system produces 316 FPS—far above any conceivable bottleneck threshold.

Q: What is the minimum FPS recorded across all tests?

A: The lowest min FPS value is 190 FPS at 3840x2160 Medium. All other min FPS values are higher, with 222 FPS at 1440p Medium and 248 FPS at 1080p Medium. No other presets have min FPS data.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 153 FPS. This is the highest visual quality available, and it still runs at more than 2.5 times the playable threshold. At 2560x1440, Ultra is also the best choice, averaging 214 FPS—a 39.9% improvement over the 4K Ultra result. At 1920x1080, Ultra delivers 239 FPS, which is 56.2% faster than 4K Ultra. The data shows no scenario where the system needs to drop below Ultra to maintain playability, which is expected given the game’s age and the hardware’s power.

For players seeking the absolute highest frame rates, Low settings at any resolution will deliver the maximum FPS: 316 at 1080p, 283 at 1440p, and 242 at 4K. However, the visual difference between Low and Ultra at these frame rates is likely negligible given the game’s art style, and the fact that Ultra remains above 150 FPS at 4K means there is no practical reason to sacrifice quality. The recommended settings are simply Ultra at every resolution, with the understanding that even the most demanding configuration leaves enormous performance headroom. The system’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are far beyond what Inside requires, further confirming that this game is a stress test for the monitor’s refresh rate, not the hardware.