Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
277 FPS
Ultra 1080p Measured
133 FPS

1440p (2K / QHD)

Low 1440p Measured
202 FPS
Ultra 1440p Measured
95 FPS

4K (Ultra HD)

Low 4K Measured
125 FPS
Ultra 4K Measured
62 FPS
7.1ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 29,123
Graphics Card
Required 27,118
Your GPU 18,093

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 62 62 100 125
1440p QHD 95 101 164 202
1080p Full HD 133 141 223 277

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 141
1920x1080 Low 277
1920x1080 Medium 223
1920x1080 Ultra 133
2560x1440 High 101
2560x1440 Low 202
2560x1440 Medium 164
2560x1440 Ultra 95
3840x2160 High 62
3840x2160 Low 125
3840x2160 Medium 100
3840x2160 Ultra 62

Performance Analysis: Inside on Your System

Measured FPS Breakdown

The recorded data for Inside with the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 SUPER shows a system that is thoroughly capable across all tested configurations. The benchmark results are striking because even the most demanding settings at the highest resolution clear the 60 FPS threshold, leaving substantial headroom for gameplay.

At 3840x2160, the average frame rates range from 61.8 FPS at Ultra settings to 125 FPS at Low settings. The High preset delivers 62.1 FPS, while Medium reaches 99.9 FPS. This resolution is the only one where the Ultra preset dips close to the playable threshold, yet it still holds above it. The spread between Low and Ultra at 4K is 63.2 FPS, which indicates that the GPU is the primary scaling factor at this resolution, but the minimum result remains comfortably playable.

Moving to 2560x1440, the performance profile improves substantially. The Low preset produces an average of 202 FPS, Medium hits 163.5 FPS, High reaches 100.9 FPS, and Ultra settles at 95.2 FPS. The gap between the fastest and slowest settings narrows to 106.8 FPS, showing that even at lower settings the hardware delivers far more than required. Every configuration at this resolution exceeds 90 FPS, which means high refresh rate monitors can be fully utilized without compromises.

At 1920x1080, the system shows its strongest results. Low settings produce 277.3 FPS, Medium reaches 222.9 FPS, High achieves 141.3 FPS, and Ultra still manages 132.9 FPS. The difference between High and Ultra is only 8.4 FPS, while the jump from Medium to High costs 81.6 FPS. This suggests that the CPU has more influence at this resolution, but the overall performance is so high that any settings choice yields a fluid experience.

The data does not include minimum or maximum frame rates, so the analysis relies on averages. Across all twelve recorded configurations, no setting falls below the 60 FPS playable threshold. The lowest average recorded is 61.8 FPS at 4K Ultra, and the highest is 277.3 FPS at 1080p Low. The scaling from 1080p to 4K at Ultra settings reduces performance by 53.5%, which is a typical load increase for a fourfold pixel count increase.

FAQ

Q: Can this PC run Inside at 4K with maximum settings?

A: Yes. At 3840x2160 with Ultra settings, the average frame rate is 61.8 FPS, which exceeds the 60 FPS playable threshold. The High preset is nearly identical at 62.1 FPS, so both are viable.

Q: What is the best settings choice for 1440p gaming?

A: The Ultra preset at 2560x1440 produces 95.2 FPS, which is the highest average among the four settings at that resolution. Since all presets clear 90 FPS, the Ultra settings are the best choice for visual quality without sacrificing smoothness.

Q: How much performance is lost when moving from 1080p to 4K?

A: At Ultra settings, the average frame rate drops from 132.9 FPS at 1920x1080 to 61.8 FPS at 3840x2160. That is a reduction of 71.1 FPS, or approximately 53.5% of the 1080p performance.

Q: Does the Low preset provide a meaningful advantage over Ultra?

A: At 4K, Low settings reach 125 FPS versus 61.8 FPS at Ultra, which is more than double the frame rate. At 1440p, Low hits 202 FPS versus 95.2 FPS at Ultra. At 1080p, Low reaches 277.3 FPS versus 132.9 FPS at Ultra. The benefit is substantial at every resolution.

Q: Is the RTX 2060 SUPER the limiting factor for this game?

A: The benchmark results indicate that the CPU has more influence at lower resolutions. The frame rate delta between Low and Ultra at 1080p is 144.4 FPS, while at 4K it is 63.2 FPS. This suggests the GPU becomes the bottleneck at higher resolutions, but neither component prevents playable performance.

Q: Which resolution and settings combination offers the best balance?

A: The 2560x1440 Ultra preset delivers 95.2 FPS, which is above 60 FPS and retains high visual fidelity. For those prioritizing maximum frame rates, 1920x1080 Low at 277.3 FPS is the fastest option, but 1440p Ultra offers a stronger balance between quality and speed.

How This Combo Ranks

The database places this combination at rank 2652 out of 3716 tested combos for Inside. That position means the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 SUPER pair sits in the lower half of all recorded configurations, but this rank does not reflect the actual gameplay experience. The ranking is based on aggregate performance across many games, and Inside is a light title that does not heavily tax modern hardware.

The percentile data confirms this context. The CPU ranks in the 81st percentile against all processors, while the GPU ranks in the 62nd percentile against all graphics cards. Both components are above average individually, yet the combo rank is lower because the database includes many high-end systems that dominate in demanding titles. For Inside specifically, the measured frame rates show that this rank is not indicative of playability problems. The lowest recorded average is 61.8 FPS, which is still above the playable threshold.

The rank of 2652 out of 3716 means roughly 71.4% of tested combos score higher in aggregate benchmarks. However, the game itself is a puzzle platformer from 2016, and the recorded data shows that even this mid-range combination delivers excessive performance. The rank is more useful for comparing overall system capability rather than assessing suitability for this particular title.

Similar Performance Alternatives

The nearest rivals for the CPU provide context for what other processors would behave similarly. The Intel Core Ultra 5 135H has an average benchmark score of 29093, which is 0.1% higher than the Ryzen 7 5800X. The Intel Xeon Phi 7210 scores 29245, 0.4% higher. The Intel Core i5-13500HX is 0.5% higher at 29270, and the AMD Ryzen 5 5600XT is 0.6% lower at 28940. These deltas are all within 1% of each other, so swapping the CPU for any of these would produce nearly identical results in Inside.

For the GPU, the NVIDIA GeForce RTX 3060 Mobile has an average score of 18159, which is 0.4% higher than the RTX 2060 SUPER. The AMD Radeon Pro 5700 scores 18189, 0.5% higher. The AMD Radeon RX 460 is 1.5% higher at 18373, and the Intel Arc A770M is 1.6% higher at 18383. These differences are minor, so any of these graphics cards would deliver similar frame rates in this game.

The practical takeaway is that this combo sits in a cluster of hardware with nearly identical performance. A system with an Intel Core Ultra 5 135H and an RTX 3060 Mobile would be effectively indistinguishable from the tested configuration. The same applies to the other rivals listed, as all fall within a 2% performance band.

CPU and GPU Roles

The measured data reveals how the CPU and GPU split responsibilities for Inside at different resolutions. At 1920x1080, the frame rate varies dramatically with settings: Low produces 277.3 FPS, Medium drops to 222.9 FPS, High falls to 141.3 FPS, and Ultra settles at 132.9 FPS. The large gap between Low and High suggests the CPU can feed frames quickly at lower settings, but the GPU becomes more involved as graphical load increases.

At 2560x1440, the pattern shifts. Low reaches 202 FPS, Medium hits 163.5 FPS, High drops to 100.9 FPS, and Ultra goes to 95.2 FPS. The relative drop from Low to Ultra is 52.9% at 1440p, compared to 52.1% at 1080p. This similarity indicates that the scaling is consistent across these resolutions, with the GPU taking on more work at higher settings.

At 3840x2160, the settings impact narrows. Low produces 125 FPS, Medium reaches 99.9 FPS, High hits 62.1 FPS, and Ultra goes to 61.8 FPS. The drop from Low to Ultra is 50.6%, which is slightly less than at lower resolutions. This suggests that at 4K, the GPU is the limiting factor across all settings, while the CPU has enough headroom to handle the lower resolution workloads easily.

The resolution scaling itself tells a clear story. At Ultra settings, moving from 1080p to 1440p reduces frame rate from 132.9 to 95.2 FPS, a 28.4% drop. Moving from 1440p to 4K reduces further to 61.8 FPS, a 35.1% drop. The larger drop at higher resolutions confirms that the GPU becomes the dominant constraint as pixel count increases. Conversely, at Low settings, the drop from 1080p to 1440p is 27.1% and from 1440p to 4K is 38.1%, showing that even at minimal graphical load the GPU still dictates performance at 4K.

For this game, the CPU is never the bottleneck at any tested configuration. The Ryzen 7 5800X has 8 cores and 16 threads, and Inside is not a multi-threaded title. The GPU, however, sees its workload scale predictably with resolution and settings, and the RTX 2060 SUPER manages to stay above 60 FPS even at the most demanding setting.

The Verdict

This PC can run Inside at every tested resolution and preset configuration. The verdict by resolution is unambiguous: all settings are playable at 3840x2160, 2560x1440, and 1920x1080, with no configuration falling below the 60 FPS threshold.

At 4K, the best settings are Ultra with an average of 61.8 FPS. This is the only scenario where the frame rate sits close to the playable threshold, but it still clears it. For users who prefer higher frame rates at 4K, the Medium preset offers 99.9 FPS, and Low reaches 125 FPS.

At 1440p, the best settings are also Ultra, producing 95.2 FPS. This provides a comfortable margin above 60 FPS and allows for smooth gameplay with maximum visual quality. The High preset at 100.9 FPS is nearly identical, so either choice works well.

At 1080p, the best settings are Ultra with 132.9 FPS. This is more than double the playable threshold, making it ideal for high refresh rate displays. Even the most demanding configuration at this resolution leaves significant performance headroom.

The overall conclusion is that the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 SUPER combination is more than sufficient for Inside. The game was released in 2016, and the hardware from 2020 and 2019 respectively provides far more performance than required. The weakest recorded result is still above 60 FPS, which means players can choose any resolution and settings combination without worrying about playability. The system delivers a smooth experience across the board, with the only meaningful trade-off being between visual fidelity and frame rate at 4K.