Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
339 FPS
Ultra 1080p Measured
188 FPS

1440p (2K / QHD)

Low 1440p Measured
287 FPS
Ultra 1440p Measured
136 FPS

4K (Ultra HD)

Low 4K Measured
178 FPS
Ultra 4K Measured
87 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 25,005
Graphics Card
Required 27,118
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 87 92 147 178
1440p QHD 136 140 227 287
1080p Full HD 188 198 314 339

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 198
1920x1080 Low 339
1920x1080 Medium 314
1920x1080 Ultra 188
2560x1440 High 140
2560x1440 Low 287
2560x1440 Medium 227
2560x1440 Ultra 136
3840x2160 High 92
3840x2160 Low 178
3840x2160 Medium 147
3840x2160 Ultra 87

Performance Analysis: Inside on Your System

Can AMD Ryzen 5 8400F + NVIDIA GeForce RTX 3070 Ti run Inside? The measured data says yes, and with remarkable headroom. Across all three tested resolutions, every preset from Low to Ultra clears the 60 FPS playable threshold by a wide margin. This is a puzzle platformer with modest graphical demands, and this combo dispatches it with frame rates that range from solidly above 60 at 4K Ultra to more than five times that figure at 1080p Low. The following analysis breaks down the exact measured performance, the optimal settings for each resolution, the division of labor between CPU and GPU, and how this pairing stacks up against other tested combinations.

Measured FPS Breakdown

At 3840x2160, the rendering load is substantial, but the RTX 3070 Ti handles it without breaking a sweat. The average frame rate at Low settings is 177.8 FPS. Moving to Medium drops the average to 146.9 FPS, a 17.4% reduction from Low. High settings produce 92.1 FPS, and Ultra is the most demanding preset, yielding 87.1 FPS. The gap between High and Ultra is just 5 FPS, indicating that the Ultra preset’s extra effects are relatively cheap at this resolution, though the drop from Medium to High is a steep 54.8 FPS.

At 2560x1440, the frame rates scale upward dramatically. Low settings average 286.9 FPS. Medium comes in at 227.4 FPS, which is 59.5 FPS slower than Low. High delivers 140.4 FPS, and Ultra averages 136.2 FPS. The difference between High and Ultra here is only 4.2 FPS, suggesting that the Ultra preset is not heavily taxing the GPU at this resolution. The progression from Low to Ultra is not linear: the largest single step down is from Medium to High, a 87.0 FPS drop, while the step from High to Ultra is minimal.

At 1920x1080, the performance is astonishing. Low settings hit an average of 339 FPS. Medium is 313.9 FPS, nearly as fast. High averages 198.2 FPS, and Ultra drops to 187.5 FPS. The difference between Low and Medium is just 25.1 FPS, but the step from Medium to High is 115.7 FPS, a 36.9% reduction. Interestingly, the gap between High and Ultra is only 10.7 FPS, which is the smallest absolute difference at this resolution. This pattern indicates that the game’s Ultra preset at 1080p adds effects that do not heavily impact the GPU, but the High preset is a more significant jump in visual complexity.

Across all resolutions, the data shows a consistent trend: the biggest FPS penalty occurs between Medium and High settings, while the Ultra preset adds only a modest incremental load over High. None of the tested settings ever approach the 60 FPS threshold from below; even the most demanding 4K Ultra configuration holds an average of 87.1 FPS, which is 45% above the playable floor.

Best Settings per Resolution

For 3840x2160, the most demanding preset that remains at or above 60 FPS is Ultra, with an average FPS of 87.1. This is the highest visual quality available, and it clears the threshold by 27.1 FPS. There is no reason to consider lower presets at 4K for playability, as even the heaviest load is comfortably playable.

At 2560x1440, Ultra also is the best choice, averaging 136.2 FPS. This is more than double the 60 FPS threshold, leaving significant headroom for potential frame time spikes or background processes. The High preset at 140.4 FPS is only marginally faster, so the visual fidelity of Ultra is the correct pick.

At 1920x1080, Ultra again is the best settings, delivering 187.5 FPS. The gap to High is 10.7 FPS, and to Medium is 126.4 FPS. Since even the most demanding preset is far above 60 FPS, users should select Ultra for the best image quality. The data provides no reason to sacrifice visual fidelity for performance at any resolution; the combo has ample headroom for the game.

CPU and GPU Roles

The scaling between resolutions and presets reveals that this game is heavily GPU-bound at higher settings, but the CPU still matters for raw frame rates. The data shows that from 1080p to 4K at Low settings, the average FPS falls from 339 to 177.8, a 47.6% reduction. This is a direct consequence of the increased pixel count stressing the GPU’s render output. At 4K, the GPU’s pixel throughput becomes the limiting factor, even for a light game like Inside.

The CPU role is more visible at lower resolutions and lower presets. At 1080p Low, the FPS is 339, which is a very high frame rate. This suggests that the Ryzen 5 8400F has enough single-thread performance to push the game to high FPS, but the GPU is still the primary limiter at 1080p Low. The CPU’s role is more important when the GPU is under less load. For instance, at 1080p, the difference between Low and Medium is only 25.1 FPS, but the difference between Medium and High is 115.7 FPS. This large drop is likely due to the GPU’s fill rate being saturated with the High settings, not a CPU limitation.

At 1440p, the CPU can feed the GPU at Low and Medium, but the High and Ultra presets show a larger drop, which indicates the GPU is doing more work. The same pattern holds at 4K. The RTX 3070 Ti’s 608.3 GB/s memory bandwidth and 21.75 TFLOPS of FP32 performance are sufficient for this game, but the GPU's pixel rate of 169.9 GPixel/s is the key spec for a 2D side-scrolling game like Inside. The CPU’s 3DMark single-thread score of 951 and its 6 cores / 12 threads are more than enough for this title’s physics and logic, which are not heavily threaded. The data shows that the GPU is the primary component that scales performance between resolutions, while the CPU provides enough headroom to avoid being a bottleneck at any tested setting.

How This Combo Ranks

In the benchmark database, this combination of AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 Ti ranks 1163 out of 3716 tested combos for this game. That places it in the 68.7th percentile of all tested systems, meaning it outperforms more than two-thirds of the combinations in the database. This is a high rank, but not a top-tier one, which is expected given that the RTX 3070 Ti is an older generation GPU, and the Ryzen 5 8400F is a mid-range processor.

The GPU’s avg benchmark score is 29945, which places it in the 75th percentile of all GPUs. Its nearest rival is the RTX 5070 Mobile, which scores 29928, a delta of 0.1% — essentially identical performance. The RX 6800 scores 30095, which is 0.5% higher, and the RTX 2080 Ti scores 29783, 0.5% lower. The RX 6700 is 1.6% higher at 30433. This means the RTX 3070 Ti sits in a tight cluster of GPUs with similar raw compute, and the measured FPS reflects that parity.

The CPU’s avg benchmark score is 25005, at the 77th percentile. Its closest rival is the Ryzen 5 7500F, with a score of 24964, a delta of 0.2%. The Core i7-11880H and i7-13620H are also within 0.3% and 0.4% respectively. The EPYC 9474F is 0.4% higher. In practical terms, this CPU’s performance is indistinguishable from these rivals for gaming, and the combo’s rank in this game is more a function of the GPU’s capabilities than the CPU.

Given that the game is not demanding, the combo rank of 1163 out of 3716 is primarily because most other tested systems also achieve high FPS. The rank is not a reflection of weakness; it shows that many other GPUs can also run this game well. However, the data confirms that this combo is above average, and the headroom over 60 FPS is substantial at all resolutions.

FAQ

Q: Can this PC run Inside at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 87.1 FPS, which is well above the 60 FPS playable threshold. The data shows that all four tested settings at 4K are playable.

Q: What is the best setting for 1440p gaming?

A: The Ultra preset at 2560x1440 delivers an average of 136.2 FPS, which is the highest quality that remains above 60 FPS. Since it is playable, it is the recommended setting.

Q: How much does the GPU matter compared to the CPU for this game?

A: The GPU is the primary scaling factor. At 1080p Low, the FPS is 339, and at 4K Low, it is 177.8, a drop of 161.2 FPS, which is due to the GPU’s pixel workload. The CPU’s role is to provide enough single-thread performance to avoid bottlenecking, which the Ryzen 5 8400F does at all settings.

Q: How does this combo rank among all tested systems?

A: It ranks 1163 out of 3716 tested combinations, placing it in the 68.7th percentile. It outperforms most systems, but the ranking is not top-tier because the game is easy to run for most high-end hardware.

Q: Is there a big difference between High and Ultra settings?

A: The biggest difference between High and Ultra is at 1080p, where the gap is 10.7 FPS (198.2 vs 187.5). At 1440p, the gap is 4.2 FPS, and at 4K it is 5.0 FPS. The Ultra preset costs only a small amount of performance while providing the maximum visual quality.

Q: Can I use a lower power supply with this combo?

A: The RTX 3070 Ti has a TDP of 290 W, and the Ryzen 5 8400F has a TDP of 65 W. The suggested PSU for the GPU is 600 W, but the fact pack does not specify a combined PSU recommendation. The data does not include any power consumption measurements for this game.

The Verdict

Can this PC run Inside? The verdict for every resolution is a clear yes. At 3840x2160, the playable settings include Low, Medium, High, and Ultra, with the best being Ultra at an average of 87.1 FPS. At 2560x1440, all settings are playable, and the best is Ultra with 136.2 FPS. At 1920x1080, Ultra is the best setting, delivering 187.5 FPS. The playable threshold is 60 FPS, and this combo far exceeds it at every preset and resolution. There is no configuration in the measured data where the FPS drops below 87.1, so the game is not only playable but also has huge headroom for high refresh-rate monitors. The Ryzen 5 8400F’s 6 cores and 12 threads are more than sufficient, and the RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are never stressed. This is a definitive pass with the ability to max out every graphical setting.

Similar Performance Alternatives

If you are considering other hardware, the nearest CPU rivals to the Ryzen 5 8400F are the AMD Ryzen 5 7500F, which scores a delta of 0.2% higher, the Intel Core i7-11850H and i7-13620H, both within 0.4% delta, and the AMD EPYC 9474F, which is 0.4% lower. Any of these processors would deliver nearly identical performance in this game, as they all have similar synthetic scores.

On the GPU side, the RTX 3070 Ti’s closest competitors are the RTX 5070 Mobile (0.1% faster), the AMD RX 6800 (0.5% faster), the RTX 2080 Ti (0.5% slower), and the RX 6700 (1.6% slower). The RX 6800 has 16 GB of VRAM versus the RTX 3070 Ti’s 8 GB, but for this game, the VRAM size does not impact the measured FPS because the usage is low. The RTX 2080 Ti is a previous generation card with similar performance, so it would behave nearly identically in Inside. The RTX 5070 Mobile is a mobile GPU, so its performance in a desktop context could vary, but the benchmark scores suggest parity. If you are building a system or upgrading, choosing any of these CPUs or GPUs would result in a similar experience for this game, as the bottleneck is the GPU’s pixel throughput, and all of these components fall within a tight performance band.