Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

51%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
230 FPS
Ultra 1080p Measured
108 FPS

1440p (2K / QHD)

Low 1440p Measured
166 FPS
Ultra 1440p Measured
81 FPS

4K (Ultra HD)

Low 4K Measured
104 FPS
Ultra 4K Measured
48 FPS
8.5ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 25,005
Graphics Card
Required 27,118
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 48 51 83 104
1440p QHD 81 85 132 166
1080p Full HD 108 118 182 230

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 118
1920x1080 Low 230
1920x1080 Medium 182
1920x1080 Ultra 108
2560x1440 High 85
2560x1440 Low 166
2560x1440 Medium 132
2560x1440 Ultra 81
3840x2160 High 51
3840x2160 Low 104
3840x2160 Medium 83
3840x2160 Ultra 48

Performance Analysis: Inside on Your System

Inside is a puzzle platformer that is visually restrained but technically demanding at higher presets. The recorded data for the AMD Ryzen 5 8400F and NVIDIA GeForce GTX 1070 combination shows a system that is extremely capable at mainstream resolutions, with clear limits only at 4K on the highest settings. The following analysis breaks down exactly where this combo stands, which component drives performance, and what settings you should choose.

How This Combo Ranks

The database places this specific CPU and GPU pairing at rank 3088 out of 3716 tested combos for Inside. That positions it in the lower portion of the overall ranking, which reflects the age of the graphics card rather than any deficiency in the processor. The GTX 1070 is an end-of-life product from the GeForce 10-series, and its database percentile of 47 against all GPUs places it just below the midpoint of everything tested. The Ryzen 5 8400F, by contrast, sits at the 77th percentile against all CPUs, a strong position that indicates the processor is not the bottleneck in this pairing.

The combination of a modern, high-percentile CPU with a mid-range, older GPU creates a system where the graphics card defines the ceiling. For a game like Inside, which relies on rendering effects rather than complex simulation, this is the expected dynamic. The rank of 3088 out of 3716 is not a measure of playability, as the measured FPS data shows, but rather a reflection of how many newer and more powerful GPU combinations have been tested. The system is far from the top of the database, yet it still delivers playable frame rates in nearly every scenario tested.

CPU and GPU Roles

The data reveals a clear pattern of GPU limitation at 4K and CPU headroom at lower resolutions. At 3840x2160, the difference between Low and Ultra settings is substantial: Low averages 104.1 FPS while Ultra drops to 47.8 FPS. That 56.3 FPS swing is entirely driven by the GPU's rendering load, as the CPU has more than enough single-thread performance to feed the graphics card. The Ryzen 5 8400F scores 2943 in Cinebench R23 single-core, which is more than sufficient for a game like Inside.

At 2560x1440, the same pattern holds but with more headroom. Low settings produce 165.9 FPS, and Ultra still manages 81.4 FPS. The GPU is still the primary constraint, but the resolution reduction gives it enough breathing room to handle higher presets. At 1920x1080, the CPU begins to matter less and less. Low settings hit 230.2 FPS, and even Ultra stays above 107.9 FPS. The processor's 6 cores and 12 threads, based on the Zen 4 Phoenix architecture, are never stressed in this scenario. Its 3DMark single-thread score of 951 and 2-thread score of 1874 show the kind of per-core strength that puzzle platformers need, but Inside is not a game that taxes the CPU heavily.

The scaling between resolutions tells the whole story. At 1080p, the system is GPU-bound at every preset, but the GPU still has enough power to exceed 60 FPS even at Ultra. At 1440p, the GPU starts to feel the load, but Ultra remains comfortable. At 4K, only Low and Medium stay above the 60 FPS threshold. The CPU is never the limiting factor in any of these configurations.

Measured FPS Breakdown

The measured data covers three resolutions and four settings tiers for each. At 1920x1080, the results are as follows: Low averages 230.2 FPS, Medium averages 182 FPS, High averages 117.7 FPS, and Ultra averages 107.9 FPS. Every preset clears the 60 FPS playability threshold with a wide margin. The gap between Low and Ultra is 122.3 FPS, which shows how much headroom the GPU has at this resolution.

At 2560x1440, the frame rates remain high but the spread narrows. Low produces 165.9 FPS, Medium produces 131.5 FPS, High produces 85.1 FPS, and Ultra produces 81.4 FPS. The difference between Low and Ultra is 84.5 FPS, smaller than at 1080p but still significant. All four presets remain above 60 FPS, with Ultra being the closest to the threshold at 81.4 FPS.

At 3840x2160, the GPU finally shows its age. Low settings deliver 104.1 FPS, which is still excellent for 4K. Medium drops to 83.4 FPS, High falls to 50.8 FPS, and Ultra bottoms out at 47.8 FPS. The drop from Medium to High is 32.6 FPS, which is the largest single-step decline in the entire dataset. This indicates that the High preset introduces rendering features that the GTX 1070 cannot handle comfortably at 4K. The minimum and maximum FPS values are not recorded in the database, so the analysis relies on averages, but the averages alone are enough to make clear recommendations.

The Verdict

This PC can run Inside, and it can run it well at most settings. The verdict data from the database confirms that 1920x1080 is fully playable at every preset, with Ultra averaging 107.9 FPS. That is more than enough for smooth gameplay on a 60 Hz display, and it even leaves room for higher refresh rates.

At 2560x1440, the system also clears 60 FPS at every preset. Ultra averages 81.4 FPS, which is comfortably above the threshold. If you own a 1440p monitor, you can enable the highest settings without worrying about performance drops.

At 3840x2160, the situation changes. The playable settings are Low and Medium, with Medium averaging 83.4 FPS and Low averaging 104.1 FPS. High and Ultra fall below 60 FPS, with 50.8 FPS and 47.8 FPS respectively. If you want to play at 4K, you should stick to Medium or lower. The High preset is not recommended at this resolution, as the 50.8 FPS average is below the playability threshold and would be noticeable during fast-moving scenes.

Overall, the verdict is positive. The system handles 1080p and 1440p flawlessly, and it can manage 4K with settings adjustments. The GTX 1070 is the limiting factor at 4K, but the Ryzen 5 8400F provides enough CPU performance to avoid any processor-related stutters.

Similar Performance Alternatives

The nearest rivals in the database provide useful context for what else would behave similarly in this game. On the CPU side, the Ryzen 5 8400F has an average benchmark score of 25005. The closest match is the AMD Ryzen 5 7500F with an average score of 24964, a delta of just 0.2 percent. The Intel Core i7-11850H scores 24935, 0.3 percent behind. The Intel Core i7-13620H scores 24911, 0.4 percent behind. On the other side, the AMD EPYC 9474F scores 25103, which is 0.4 percent ahead. Any of these processors would produce nearly identical frame rates in Inside, since the game is not CPU-intensive and all of them offer strong single-thread performance.

On the GPU side, the GTX 1070 has an average benchmark score of 9780. The AMD FirePro W5000 scores 9803, which is 0.2 percent higher. The NVIDIA Quadro M2000M scores 9832, 0.5 percent higher. The NVIDIA Tesla M10 scores 9724, 0.6 percent lower. The NVIDIA Tesla C2070 scores 9716, 0.7 percent lower. These deltas are all within one percent, meaning the practical performance difference in Inside would be negligible. If you are considering an upgrade or a replacement, any of these GPUs would give you a similar experience.

It is worth remembering the GPU rivals are not direct consumer gaming cards, but the database records their scores, and the deltas are so small that the in-game FPS would be nearly indistinguishable. For a game like Inside, which does not rely on current-generation GPU features, this level of performance equivalence is expected.

Best Settings per Resolution

The database provides a clear best setting for each resolution based on the highest preset that stays at or above 60 FPS. At 1920x1080, the best setting is Ultra, with an average of 107.9 FPS. There is no reason to lower the preset at this resolution, as even the most demanding option clears the threshold by nearly 48 FPS.

At 2560x1440, the best setting is also Ultra, with an average of 81.4 FPS. This is a comfortable margin above 60 FPS, and the visual quality improvement over High is worth the small performance cost. High averages 85.1 FPS, so the difference between the two is only 3.7 FPS, but Ultra is still the better choice.

At 3840x2160, the best setting is Medium, with an average of 83.4 FPS. Low is also playable at 104.1 FPS, but Medium offers a significant visual upgrade for a 20.7 FPS cost. High and Ultra are not recommended at 4K, as they fall below the 60 FPS threshold. If you want the highest visual fidelity at 4K, you will need a stronger GPU, but Medium delivers a smooth experience with the current hardware.

The data shows a system that is well balanced for 1080p and 1440p gaming, with enough CPU headroom to last through future upgrades. At 4K, the GTX 1070 is the clear bottleneck, and settings must be managed accordingly. For the vast majority of players using a 1080p or 1440p display, this combination will deliver a flawless experience in Inside.