Inside

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3070 combination delivers exceptionally high frame rates in Inside, a 2D puzzle platformer that is far lighter on hardware than most modern 3D titles. Across all tested resolutions, from 1920x1080 to 3840x2160, this pairing maintains performance far above the 60 FPS playability threshold, making it a quintessential example of a high-refresh-rate or 4K-capable setup for this genre. The data shows that the most demanding preset, Ultra, is not just playable but actually the optimal choice at every resolution, as the average frame rates remain well above 60 FPS even at 4K.

Best Settings per Resolution

For a game like Inside, the goal is to maximize visual fidelity while maintaining a smooth, stutter-free experience. Based on the measured FPS data, the most demanding preset that stays at or above 60 FPS is the Ultra setting at all three resolutions tested. There is no need to compromise on visual quality with this hardware.

• 1920x1080 (1080p): Ultra settings yield an average of 182.8 FPS. This is a substantial margin above the 60 FPS threshold, making it perfect for high-refresh-rate monitors (e.g., 144Hz or 165Hz). The performance headroom is so vast that there is no risk of dropping below the threshold even in the most complex scenes.
• 2560x1440 (1440p): The Ultra preset is again the best choice, delivering an average of 131.7 FPS. This is an excellent result for 1440p gaming, comfortably clearing the 60 FPS requirement and leaving ample headroom for a high refresh rate display. The data suggests you can enjoy the full visual fidelity of Inside without any performance concerns.
• 3840x2160 (4K): Even at 4K, the Ultra preset remains the optimal setting, with an average of 83.2 FPS. This is a playable frame rate for a game like Inside, where precise timing is less critical than in a competitive shooter. This result confirms that this CPU/GPU combo is not just capable of running Inside at 4K but can do so with the highest settings while staying above the 60 FPS target.

The verdict is clear: you should always play Inside on the Ultra preset with this hardware. The performance difference between Ultra and High is minimal in terms of playability, but the visual improvement is always welcome.

CPU and GPU Roles

The data reveals a distinct shift in bottleneck behavior depending on the resolution. At lower resolutions, the GPU is the primary limiting factor, but the CPU's performance becomes increasingly relevant as resolution decreases.

At 1920x1080, the frame rates are extremely high, ranging from 182.8 FPS on Ultra to 378.8 FPS on Low. The difference between the Low and Ultra presets is significant, a drop of about 196 FPS. This scaling is primarily driven by the GPU, as lower settings reduce pixel shading and texture work. However, the CPU still has a significant role to play in maintaining such high frame rates. The Ryzen 5 7600X, with its single-thread score of 1060 in 3DMark and 1965 in Cinebench R23, is well-equipped to handle the game's logic at these speeds.

At 2560x1440, the average frame rates are lower across all settings, but the pattern remains. The Ultra preset drops to 131.7 FPS, and Low is at 271.1 FPS. The gap between Low and Ultra is now 139.4 FPS. This shows that the GPU is still the dominant factor, but the CPU remains capable of feeding it enough data to achieve these high frame rates.

At 3840x2160, the GPU becomes the clear bottleneck. The average frame rates for all settings are significantly lower than at 1440p, with the Ultra preset at 83.2 FPS and Low at 170.9 FPS. The difference between Low and Ultra is only 87.7 FPS, a smaller difference than at lower resolutions. This is because at 4K, the number of pixels is the limiting factor, and the GPU's fill rate and pixel throughput are the primary constraint. The CPU's role is reduced, as it can easily keep up with the GPU's output. The RTX 3070 has a pixel rate of 165.6 GPixel/s, which is the key metric here. This is why the GPU is the more important component at 4K.

In summary, the GPU is the primary component that matters for Inside at 4K, as the game's visuals become heavily pixel-bound. At 1440p and especially 1080p, the CPU's single-threaded performance is more important, as it must process the game's updates fast enough to keep the GPU saturated.

Similar Performance Alternatives

Based on the nearestRivals data from the FACT PACK, this CPU and GPU combo is closely matched by a few other hardware pairings. It is important to note that these are comparisons of the components themselves, not the combined system's performance in Inside.

For the AMD Ryzen 5 7600X:

• AMD Ryzen 7 5700X: This CPU has an average benchmark score of 27578, which is a deltaPct of 0.2% from the 7600X. This means it is essentially identical in overall benchmark performance, though it is based on a different, older architecture (Zen 3 vs Zen 4).
• Intel Core i5-12600K: With the same average score of 27578 and a deltaPct of 0.2%, this processor also performs nearly the same as the 7600X in general compute tasks. This is a direct competitor for a mid-range gaming system.
• AMD Ryzen 5 8500GE: This CPU has an average score of 27712, which is -0.3% deltaPct, slightly higher than the 7600X. It's a close match, though it's likely a lower-power part.
• AMD Ryzen 7 5800: This CPU has an average score of 27535, a deltaPct of 0.4%, making it a near-identical performer to the 7600X.

For the NVIDIA GeForce RTX 3070:

• AMD Radeon RX 7600 XT: This GPU has an average benchmark score of 17083, which is 0.7% higher than the RTX 3070 (17208). It is a close match and a direct modern competitor.
• NVIDIA GeForce GTX 690: This older dual-GPU card has an average score of 17037, which is 1% lower than the RTX 3070. It's a surprising match given its age, but the data shows it's in the same performance tier.
• AMD Radeon HD 7970M: At 17019, this is 1.1% lower in performance, but it is a mobile part. It is an unusual comparison, but it highlights the performance range.
• NVIDIA Tesla K40c: This is a workstation GPU with an average score of 17468, which is -1.5% lower than the RTX 3070, meaning the RTX 3070 is actually slightly faster.

What this means for the system is that, for Inside, you could expect nearly identical performance with a system using any of these CPUs and GPUs. The Ryzen 5 7600X + RTX 3070 pairing is a solid baseline, and you can swap in any of the above components without expecting a large, measurable change.

FAQ

*Q: Can this combo run Inside at 4K with everything maxed out?*

A: Yes. The measured data shows that at 3840x2160 on the Ultra preset, the average FPS is 83.2, which is well above the 60 FPS playable threshold.

Q: What is the best resolution for this combo to get the highest frame rate?

A: The highest average FPS is achieved at 1920x1080, where the Ultra preset yields 182.8 FPS. If you prioritize maximum frame rates, 1080p is the best choice.

Q: Should I lower the settings to get more FPS at 4K?

A: No. The Ultra preset at 4K is already above 60 FPS (83.2 FPS). Lowering the settings is not necessary for a playable experience, and you will sacrifice visual quality for a frame rate increase you don't need.

*Q: Is the CPU or GPU more important for Inside?*

A: At 1080p and 1440p, the GPU is the primary bottleneck, but the CPU's strong single-threaded performance is needed to achieve those very high frame rates. At 4K, the GPU is the dominant factor, as it is heavily pixel-bound.

Q: Will I experience any screen tearing at 1080p?

A: The data shows a very high average of 182.8 FPS on Ultra at 1080p. With such high output, you will likely need a high-refresh-rate monitor to visually experience it, but the performance is there.

Q: Are there any settings in the data that are not playable?

A: No. All tested settings (Low, Medium, High, and Ultra) at all three resolutions (1080p, 1440p, 4K) and all are above the 60 FPS threshold, so all are playable.

Measured FPS Breakdown

The following data is taken directly from the benchmark, showing the average FPS for each setting and resolution. No minimum or maximum FPS values were recorded in the data set.

1920x1080:

• Ultra: 182.8 FPS
• High: 186.5 FPS
• Medium: 300.7 FPS
• Low: 378.8 FPS

2560x1440:

• Ultra: 131.7 FPS
• High: 138.8 FPS
• Medium: 214.7 FPS
• Low: 271.1 FPS

3840x2160:

• Ultra: 83.2 FPS
• High: 86.4 FPS
• Medium: 138.2 FPS
• Low: 170.9 FPS

The data shows a clear pattern: as you lower the resolution from 4K to 1080p, the FPS increases dramatically. The Low preset at 1080p is more than double of the Ultra preset at 4K. The Medium and Low presets at 1440p (214.7 FPS and 271.1 FPS) are also notably high, which indicates that the game's requirements are well within the GPU's capabilities.

How This Combo Ranks

The AMD Ryzen 5 7600X + NVIDIA GeForce RTX 3070 combination ranks 1296 out of 3716 tested combos in the database for Inside. This places it in the top half of all possible hardware configurations, which is a very strong showing.

This ranking reflects the fact that Inside is not a demanding game, and even a mid-to-high-end setup from the previous generation will be well above the average performance. The rank implies that a vast majority of the 3716 tested combos are capable of running the game at playable frame rates. Being in the top ~35% of all tested configurations is a good indicator that this combo will provide a flawless experience for this title, even if it is not the absolute top-of-the-line for a game with such low requirements. The data confirms that this pairing is more than sufficient to handle Inside at its highest settings and maximum resolutions.