Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 85 | 90 | 143 | 179 |
| 1440p QHD | 136 | 143 | 228 | 285 |
| 1080p Full HD | 189 | 198 | 317 | 358 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 5 7600 + RTX 3070 Ti pairing is far beyond what a 2016 puzzle platformer needs, but the measured data shows it is capable. Inside is not a demanding title by modern standards, but the benchmark results still show clear scaling across resolutions and presets.
Measured FPS Breakdown
At 3840x2160, the data shows a wide spread between presets. Low settings average 179 FPS, which is already well above the 60 FPS playable threshold. Medium settings drop to an average of 143 FPS, with a minimum of 122 FPS and a maximum of 165 FPS. High settings average 90 FPS, while Ultra averages 85 FPS. None of the 4K results fall below the playable threshold, though the jump from Low to Ultra is roughly a 53% reduction in average frame rate.
Moving to 2560x1440, the numbers climb significantly. Low settings hit an average of 285 FPS. Medium averages 228 FPS, with a minimum of 194 FPS and a maximum of 263 FPS. High settings average 143 FPS, and Ultra averages 136 FPS. The gap between Low and Ultra here is roughly 52% lower average FPS, similar to the 4K scaling. The minimum recorded at Medium (194 FPS) still exceeds the maximum at Ultra (136 FPS), showing the preset choice matters more than resolution variance at this tier.
At 1920x1080, performance is extremely high across all presets. Low settings average 358 FPS. Medium averages 317 FPS, with a minimum of 270 FPS and a maximum of 365 FPS. High settings average 198 FPS, and Ultra averages 189 FPS. Even the lowest measured value at 1080p Medium (270 FPS) is over four times the 60 FPS playable threshold. The delta between Low and Ultra at 1080p is about 47% lower average FPS, which is slightly less pronounced than at 1440p or 4K.
Notably, the data only provides min/max figures for Medium settings at each resolution. At 4K Medium, the 122 FPS minimum is still double the playable threshold. At 1440p Medium, the 194 FPS minimum is over triple the threshold. At 1080p Medium, the 270 FPS minimum is more than quadruple the threshold.
CPU and GPU Roles
For Inside, the GPU clearly dominates the performance picture, but the CPU matters more at lower resolutions. The scaling from 1440p to 4K at the same preset shows the GPU workload increasing: at Medium, average FPS drops from 228 at 1440p to 143 at 4K, a 37% reduction. From 1080p to 1440p Medium, the drop is from 317 to 228, a 28% reduction. This pattern indicates that 4K pushes the RTX 3070 Ti harder, while 1080p and 1440p are more likely to be constrained by the CPU's ability to feed frames.
The Ryzen 5 7600 is a 6-core, 12-thread Zen 4 processor with a boost clock of 5.10 GHz. Its benchmark scores show strong single-thread performance (Cinebench R23 single-core score of 1852) and solid multi-thread capability (Cinebench R23 multi-core score of 12735). For a puzzle platformer like Inside, which typically has modest thread utilization, the CPU's single-core strength is likely the limiting factor at 1080p, where frame rates exceed 300 FPS at low settings.
At 4K, the CPU headroom is less relevant because the GPU becomes the bottleneck. The data shows that at 4K Ultra, average FPS is 85, while at 1080p Ultra it is 189. This 55% reduction is far larger than the resolution pixel count difference (4K has 4x the pixels of 1080p), indicating that the GPU's fill rate and memory bandwidth are the limiting factors at higher resolutions. The RTX 3070 Ti has 8 GB of GDDR6X memory on a 256-bit bus with 608.3 GB/s bandwidth, which is sufficient for Inside but explains why 4K performance is lower relative to 1440p.
The preset scaling within each resolution also points to GPU-bound behavior. At 4K, moving from Low to Ultra reduces average FPS from 179 to 85, a 52% drop. At 1440p, the same preset change goes from 285 to 136, a 52% drop. At 1080p, from 358 to 189, a 47% drop. The consistent percentage reduction across resolutions suggests the GPU's shading and texture units are the primary constraint when raising settings, while the CPU maintains sufficient frame pacing even at lower resolutions.
Similar Performance Alternatives
The CPU's nearest rivals based on average benchmark scores include the AMD Ryzen 9 6900HX (0.2% faster), AMD Ryzen 7 7435HS (0.3% slower), Intel Core i9-11900KF (0.4% faster), and AMD Ryzen 5 8540U (0.5% faster). These deltas are all within half a percent, meaning any of these processors would deliver nearly identical frame rates in Inside at the same GPU. The Ryzen 7 7435HS is the closest alternative with a delta of -0.3%, which would be imperceptible in gameplay.
For the GPU, the nearest rivals are NVIDIA GeForce RTX 5070 Mobile (0.1% faster), AMD Radeon RX 6800 (0.5% slower), NVIDIA GeForce RTX 2080 Ti (0.5% faster), and AMD Radeon RX 6700 (1.6% slower). The RTX 5070 Mobile and RTX 2080 Ti are essentially performance equals, so swapping in either would produce nearly the same FPS values at each resolution and preset. The RX 6800 is slightly slower on average, and the RX 6700 is about 1.6% slower, which would translate to a few frames difference at most in Inside.
Given these small deltas, a system with the Ryzen 5 7600 and any of these rival components would clear the 60 FPS threshold at all resolutions and presets. The only scenario where the delta might matter is at 4K Ultra, where the RX 6700's 1.6% slower score could theoretically bring average FPS from 85 down to roughly 84, still far above the playable threshold.
The Verdict
The data is unambiguous: this PC runs Inside at or above 60 FPS at every resolution and preset combination tested. At 3840x2160, all four presets are playable, with Ultra averaging 85 FPS. At 2560x1440, all presets are playable, with Ultra averaging 136 FPS. At 1920x1080, all presets are playable, with Ultra averaging 189 FPS. The playable threshold of 60 FPS is exceeded by a wide margin everywhere, and even the lowest recorded minimum (122 FPS at 4K Medium) is double the threshold.
The verdict by resolution confirms that Ultra is the best setting at each resolution: 4K Ultra at 85 FPS, 1440p Ultra at 136 FPS, and 1080p Ultra at 189 FPS. There is no scenario where this combination fails to hit 60 FPS, making this system overkill for Inside. The game's 2016 release date and puzzle platformer genre mean it was never a heavy GPU load, but the data shows the RTX 3070 Ti still scales properly across presets and resolutions.
How This Combo Ranks
In the benchmark database, this combination ranks 1138 out of 3716 tested combos, placing it in the upper third of all systems. The percentile for the CPU alone is 78, meaning the Ryzen 5 7600 outperforms 78% of all CPUs tested. The GPU's percentile is 75, outperforming 75% of all GPUs tested. The combo rank of 1138 out of 3716 suggests that while this is a strong pairing, there are many faster combinations in the database, likely featuring higher-end GPUs or newer architectures.
However, for Inside specifically, the combo rank is less meaningful because the game is so easy to run. A combo ranked 2000th would still likely hit 60 FPS at 4K Ultra. The rank of 1138 indicates that this system has headroom for more demanding titles, but for Inside, the ranking is effectively irrelevant to playability. The data shows that the combo is in the 69th percentile of tested systems (1138/3716), which is solid but not exceptional for a 2023 CPU paired with a 2021 GPU.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 85 FPS. This is the highest quality setting available, and it clears the threshold by 25 FPS. There is no need to drop to High (90 FPS) or Medium (143 FPS) for playability, though those options exist for higher refresh rates.
At 2560x1440, Ultra averages 136 FPS, which is more than double the 60 FPS threshold. This makes Ultra the clear best setting at this resolution, with enough headroom for a 120Hz or 144Hz display. The 136 FPS average is consistent with the GPU's strong performance at this resolution, and the minimum at Medium (194 FPS) confirms that even the most demanding preset will not dip below playable levels.
At 1920x1080, Ultra averages 189 FPS, which is over triple the threshold. This is the best setting for competitive play or high refresh rate monitors. The 189 FPS average at Ultra is only slightly below the 198 FPS at High, so the visual quality increase from High to Ultra costs only about 9 FPS. For a puzzle platformer, the extra visual fidelity at Ultra is worth the small frame rate cost.
The data consistently shows that Ultra is the best setting at every resolution, with no need to compromise for playability. The only reason to lower settings would be to push frame rates beyond 200 FPS at 1080p or beyond 144 FPS at 1440p, which might appeal to users with very high refresh rate displays. But for standard 60Hz, 144Hz, or even 240Hz displays, Ultra at each resolution provides a smooth experience without any dips below the playable threshold.