Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
257 FPS
Ultra 1080p Measured
122 FPS

1440p (2K / QHD)

Low 1440p Measured
185 FPS
Ultra 1440p Measured
88 FPS

4K (Ultra HD)

Low 4K Measured
116 FPS
Ultra 4K Measured
55 FPS
7.8ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 26,324
Graphics Card
Required 27,118
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 58 93 116
1440p QHD 88 92 148 185
1080p Full HD 122 129 206 257

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 129
1920x1080 Low 257
1920x1080 Medium 206
1920x1080 Ultra 122
2560x1440 High 92
2560x1440 Low 185
2560x1440 Medium 148
2560x1440 Ultra 88
3840x2160 High 58
3840x2160 Low 116
3840x2160 Medium 93
3840x2160 Ultra 55

Performance Analysis: Inside on Your System

The AMD Ryzen 5 7600 and AMD Radeon RX 6600 combination delivers a remarkably smooth experience in Inside, a 2016 Puzzle Platformer, with benchmark results showing that the GPU is the primary driver of performance at higher resolutions, while the CPU’s strong single-thread capabilities ensure high frame rates at lower settings. Measured data indicates that this combo can handle the game’s most demanding presets at 1080p and 1440p, but requires a settings reduction at 4K to maintain the 60 FPS threshold.

Measured FPS Breakdown

The benchmark results for this combination are comprehensive, covering three resolutions and four quality presets. At 1920x1080, the performance is exceptionally high across the board. The Low preset achieves an average of 257 FPS, which is the highest recorded for this combo. Stepping up to Medium sees the average drop to 206 FPS, with a minimum of 175 FPS and a maximum of 237 FPS, indicating excellent frame pacing. The High preset still produces an average of 129 FPS, while the Ultra preset, the most demanding, yields an average of 122 FPS. None of these settings dip below the 60 FPS playable threshold, suggesting that at 1080p, the system is heavily unconstrained.

Moving to 2560x1440, the performance remains strong but begins to show the GPU’s workload. The Low preset averages 185 FPS, a significant but expected drop from the 1080p result. Medium follows with an average of 148 FPS, and the minimum of 126 FPS and maximum of 170 FPS show a stable experience. High settings produce an average of 92 FPS, which is still well above the playable threshold. The Ultra preset at 1440p averages 88 FPS, confirming that even the most visually intensive settings are comfortably playable at this resolution.

At 3840x2160, the demands on the GPU become more apparent. The Low preset averages 116 FPS, still a very playable frame rate. The Medium preset averages 93 FPS, with a minimum of 79 FPS and a maximum of 107 FPS, showing that the frame rate can fluctuate but remains safely above the 60 FPS line. However, the High preset drops to an average of 58 FPS, just below the playable threshold, and the Ultra preset falls further to 55 FPS. These results indicate that 4K resolution requires a compromise on visual quality to maintain smooth gameplay.

FAQ

Q: What is the maximum average frame rate achievable with this hardware?

A: The highest average frame rate recorded is 257 FPS, achieved at the 1920x1080 resolution with the Low preset.

*Q: Can this combination run Inside at 4K resolution with the Ultra preset?*

A: No. The benchmark data shows the Ultra preset at 3840x2160 produces an average of 55 FPS, which is below the 60 FPS playable threshold. The best playable setting at 4K is Medium, which averages 93 FPS.

Q: How does the frame rate scale from 1080p to 1440p with the High preset?

A: The average frame rate drops from 129 FPS at 1920x1080 to 92 FPS at 2560x1440, a decrease of 37 FPS. This represents a 28.7% reduction in performance.

Q: What is the lowest frame rate recorded at any resolution and settings?

A: The lowest minimum frame rate observed is 79 FPS, which occurred at the 3840x2160 resolution with the Medium preset. This is still above the 60 FPS playable threshold.

Q: Is the Ultra preset playable at 2560x1440?

A: Yes, the Ultra preset at 2560x1440 yields an average frame rate of 88 FPS, which is well above the 60 FPS threshold for playability.

Q: What is the most demanding preset that maintains an average of at least 60 FPS at 4K?

A: The Medium preset at 3840x2160 is the most demanding option that stays above the threshold, achieving an average of 93 FPS. The High preset falls short with an average of 58 FPS.

Best Settings per Resolution

Based on the measured FPS data, the optimal settings for each resolution are determined by the most demanding preset that maintains an average frame rate at or above the 60 FPS playable threshold.

At 1920x1080, all presets, including Ultra, exceed 60 FPS. The Ultra preset is the most demanding and achieves an average of 122 FPS, making it the best choice for maximum visual quality without sacrificing smoothness.

At 2560x1440, the Ultra preset also remains viable, with an average of 88 FPS. This is the highest quality setting available and still provides a comfortable margin above the 60 FPS threshold, making it the recommended choice for this resolution.

At 3840x2160, the High preset fails to meet the 60 FPS requirement, averaging only 58 FPS. The Ultra preset is even lower at 55 FPS. The most demanding playable preset is therefore Medium, which delivers an average of 93 FPS. This represents a significant visual compromise from High or Ultra, but it is the only way to maintain smooth gameplay at 4K with this hardware.

How This Combo Ranks

The benchmark database places this specific combination of the AMD Ryzen 5 7600 and AMD Radeon RX 6600 at rank 2869 out of 3716 tested combos for Inside. This ranking places it in the lower-middle tier of all tested systems, indicating that while it is fully capable of running the game at most settings, many other hardware configurations deliver higher absolute performance. The data suggests that the combination is not near the top of the leaderboard, but the measured frame rates show it is far from inadequate. The percentile ranking for the CPU alone is 78, meaning it performs better than 78% of all tested CPUs, while the GPU’s percentile is 63. This disparity suggests that the GPU is the limiting factor in this pair, a conclusion supported by the FPS scaling across resolutions. The rank of 2869 reflects the overall system performance, which is constrained by the GPU’s mid-range capabilities when pushed to higher resolutions.

Similar Performance Alternatives

The nearest rival for the AMD Ryzen 5 7600, based on average benchmark scores, is the AMD Ryzen 9 6900HX, which has a delta of 0.2%. This indicates that the Ryzen 9 6900HX performs nearly identically in synthetic benchmarks, so a system with that CPU would likely produce very similar frame rates in Inside. Other close alternatives include the Intel Core i9-11900KF with a delta of 0.4%, the AMD Ryzen 5 8540U with a delta of 0.5%, and the AMD Ryzen 7 7435HS, which is slightly faster with a delta of -0.3%. The 7435HS would be a marginal upgrade in CPU performance, but the differences are so small that they would have a negligible impact on the game’s FPS.

On the GPU side, the AMD Radeon RX 6600’s nearest rival is the NVIDIA Quadro K6000, with a delta of 0%. This means the Quadro K6000, despite being an older professional card, delivers comparable benchmark performance. Other close matches include the NVIDIA GeForce RTX 4050 Mobile, which is 0.1% faster, and the NVIDIA Tesla K20m, which is 0.3% slower. The NVIDIA RTX 2000 Ada Generation is 0.4% slower. In practical terms, a system with any of these GPUs paired with the Ryzen 5 7600 would behave almost identically to the tested configuration in Inside. The performance deltas are all within a fraction of a percent, meaning users should expect similar FPS figures at all resolutions and settings.

The Verdict

The data is clear: this PC can absolutely run Inside with a smooth experience at most settings. At 1920x1080, the system clears the 60 FPS threshold with every preset, including Ultra, which averages 122 FPS. At 2560x1440, the verdict is equally positive, with the Ultra preset averaging 88 FPS and all other settings performing even better. The only resolution where the system struggles is 3840x2160.

At 4K, the High and Ultra presets fall below the 60 FPS playable line, averaging 58 FPS and 55 FPS respectively. However, the Medium preset at 4K achieves a solid 93 FPS, and the Low preset reaches 116 FPS. The verdict by resolution confirms that 4K is playable, but only when visual settings are reduced to Medium or lower. For the best balance of visual fidelity and performance, the Medium preset at 4K is the recommended choice. At 1440p and 1080p, users can enjoy the game at its maximum visual quality without any frame rate concerns.

CPU and GPU Roles

The benchmark data reveals an interesting dynamic between the CPU and GPU in this game. The AMD Ryzen 5 7600 is a high-performance processor with a benchmark percentile of 78, indicating it is well above average. The GPU, an AMD Radeon RX 6600, has a lower percentile of 63. This difference in relative performance is reflected in the scaling of FPS across resolutions.

At 1080p, the frame rates are extraordinarily high, with the Low preset hitting 257 FPS. This suggests that the CPU is capable of feeding the GPU with data faster than the GPU can render at this low resolution, meaning the GPU is likely the limiting factor even at 1080p. The drop from 257 FPS at Low to 122 FPS at Ultra is a 52.5% reduction, which is a direct result of the increased pixel shading and texture work at higher settings.

The scaling from 1080p to 1440p shows a significant performance cost. For the Ultra preset, the average drops from 122 FPS to 88 FPS, a 27.9% decrease. This indicates that the GPU is heavily impacted by the increase in pixel count. In contrast, the CPU’s workload for the game’s logic and physics is relatively unchanged by resolution, so the GPU becomes the sole bottleneck as resolution increases.

At 4K, the GPU’s limitations become even more pronounced. The Ultra preset falls to 55 FPS, and the High preset to 58 FPS, while the Medium preset remains at 93 FPS. The difference between Medium and Ultra at 4K is 38 FPS, a 40.9% drop, showing that the GPU is struggling with the most demanding shader effects and textures at this resolution. The CPU’s role appears to be secondary, as even the most demanding CPU-bound scenarios are easily handled by the Ryzen 5 7600, given the high frame rates at 1080p. The data strongly suggests that for Inside, the GPU is the dominant factor in determining performance at resolutions above 1080p, while the CPU provides ample headroom to avoid becoming a bottleneck.