Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

91%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
271 FPS
Ultra 1080p Measured
129 FPS

1440p (2K / QHD)

Low 1440p Measured
195 FPS
Ultra 1440p Measured
93 FPS

4K (Ultra HD)

Low 4K Measured
123 FPS
Ultra 4K Measured
58 FPS
7.4ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 44,573
Graphics Card
Required 27,118
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 58 61 98 123
1440p QHD 93 98 156 195
1080p Full HD 129 136 217 271

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 136
1920x1080 Low 271
1920x1080 Medium 217
1920x1080 Ultra 129
2560x1440 High 98
2560x1440 Low 195
2560x1440 Medium 156
2560x1440 Ultra 93
3840x2160 High 61
3840x2160 Low 123
3840x2160 Medium 98
3840x2160 Ultra 58

Performance Analysis: Inside on Your System

The AMD Ryzen 5 7500X3D paired with the Intel Arc B580 delivers a remarkably strong performance profile for Inside, a Puzzle Platformer that clearly favors high frame rates. The measured data shows this combination is more than capable of handling the game’s demands across all tested resolutions, with the only limitation appearing at 4K Ultra settings. This analysis breaks down the exact frame rates, compares the combo’s standing against other tested systems, and provides a clear verdict on what settings to use for the best experience.

Measured FPS Breakdown

The measured FPS data provides a comprehensive look at how this CPU and GPU pairing handles Inside at three resolutions and four quality presets. The results show a consistent pattern where the game scales efficiently with both resolution and settings, with average frame rates ranging from a low of 58 FPS at 4K Ultra to a high of 271 FPS at 1080p Low.

At 3840x2160 (4K), the combo delivers an average of 61 FPS on High settings, which is just above the 60 FPS playable threshold. The Medium preset shows a stronger average of 98 FPS with a minimum of 83 FPS and a maximum of 113 FPS, indicating smooth performance with no significant drops. Low settings push the average to 123 FPS, but Ultra settings drop the average to 58 FPS, falling just below the playable threshold. This makes 4K High the most demanding playable setting, while 4K Ultra is not recommended for a consistent experience.

Moving to 2560x1440 (1440p), the frame rates improve substantially. The High preset averages 98 FPS, while Medium hits 156 FPS with a minimum of 133 FPS and a maximum of 180 FPS. Low settings deliver a massive 195 FPS average, and even Ultra settings maintain a strong 93 FPS average. This resolution offers headroom for all presets, with Ultra being the most demanding option that still clears the 60 FPS threshold by a wide margin.

At 1920x1080 (1080p), the performance is exceptional across the board. The High preset averages 136 FPS, while Medium reaches 217 FPS with a minimum of 185 FPS and a maximum of 250 FPS. Low settings produce an astonishing 271 FPS average, and Ultra settings still manage 129 FPS. These numbers indicate that the combo is heavily GPU-bound at lower resolutions, but the Arc B580 handles the load effortlessly, providing a highly responsive experience for fast-paced platforming.

How This Combo Ranks

Within the benchmark database, this specific CPU and GPU combination ranks 2764 out of 3716 tested combos for Inside. This places it in the lower-middle portion of the overall ranking, but that ranking does not reflect the actual gaming experience — the game itself is not particularly demanding, and the measured FPS data shows this combo performs far better than its rank might suggest. The rank is likely skewed by the inclusion of many higher-end and more expensive combinations that produce even higher frame rates, but for practical purposes, the performance is more than sufficient.

The CPU’s individual benchmark scores are relevant here. The AMD Ryzen 5 7500X3D achieves a Passmark single-thread score of 3494 and a multithread score of 25047, with an average benchmark score of 44573. This places it in the 89th percentile of all CPUs, meaning it outperforms the vast majority of processors. Its nearest rivals include the Intel Core Ultra X9 388H with a score of 44466 (0.2% higher), the Intel Core i9-13950HX at 44342 (0.5% higher), and the AMD Ryzen AI Max 385 at 44309 (0.6% higher), while it edges out the Intel Core i5-14600 which scores 44889 (-0.7% lower). These margins are negligible, confirming the CPU is a high-tier performer.

The GPU, Intel Arc B580, has an average benchmark score of 23021 and sits in the 68th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 580 2048SP at 23061 (-0.2% difference), the NVIDIA GeForce RTX 2080 at 22895 (0.6% higher), the NVIDIA GeForce RTX 3080 at 23172 (-0.7% lower), and the NVIDIA P106-100 at 23249 (-1% lower). The Arc B580’s performance is within 1% of these cards, indicating it competes favorably with several previous-generation high-end options.

CPU and GPU Roles

The data shows that for Inside, the GPU is the primary bottleneck at higher resolutions, while the CPU becomes more relevant at lower resolutions where frame rates are extremely high. This is evident from the scaling between resolutions and presets.

At 4K, the average FPS drops from 123 on Low to 58 on Ultra, a 52% reduction. This large gap between Low and Ultra settings indicates that the GPU’s fill rate and shading capabilities are the limiting factor. The CPU, with its strong single-thread score of 3494, is not stressed at this resolution because the frame rates are still manageable. The fact that 4K High averages 61 FPS while 4K Ultra drops to 58 FPS suggests the GPU is right at its limit for the most demanding settings.

At 1440p, the pattern shifts slightly. The average FPS ranges from 195 on Low to 93 on Ultra, a 52% drop again, but the absolute numbers are higher. This indicates the GPU is still the main constraint, but the CPU has more headroom to feed frames. The Medium preset’s minimum of 133 FPS shows that the combo can sustain high frame rates without stuttering, which is crucial for a platformer that requires precise timing.

At 1080p, the story changes. Low settings produce 271 FPS, while Ultra still delivers 129 FPS, a 52% drop. However, at these frame rates, the CPU becomes more involved. The Ryzen 5 7500X3D’s 12 threads and high single-thread performance are necessary to keep up with the GPU’s output. The fact that the combo maintains over 200 FPS on Medium and 271 FPS on Low suggests that the CPU is not holding back the GPU, but rather the GPU is the limiting factor even at this resolution. The scaling between resolutions also shows this: moving from 1080p to 1440p reduces average FPS by roughly 30-40% depending on the preset, while moving from 1440p to 4K reduces it by another 35-40%. This consistent scaling indicates a GPU-bound scenario across all settings.

FAQ

Q: Can this combo run Inside at 4K with High settings?

A: Yes. The measured average FPS at 3840x2160 with High settings is 61 FPS, which is just above the 60 FPS playable threshold. This is a viable option for 4K gaming.

Q: What is the best setting for 1440p to get the highest quality without sacrificing smoothness?

A: Ultra settings at 2560x1440 produce an average of 93 FPS, which is well above the 60 FPS threshold. This is the most demanding preset that remains fully playable.

Q: Is the CPU or GPU more important for this game at 1080p?

A: The data indicates the GPU is the primary bottleneck at 1080p, as frame rates scale down significantly with higher presets (271 FPS on Low vs 129 FPS on Ultra). The CPU’s strong single-thread score of 3494 ensures it can keep up, but the GPU’s workload is what determines the final frame rate.

Q: Does the combo ever drop below 60 FPS?

A: At 4K Ultra, the average FPS is 58, which is below the 60 FPS threshold. However, at all other tested settings across 4K, 1440p, and 1080p, the average FPS stays above 60. The only measured minimum FPS values are 83 FPS at 4K Medium and 133 FPS at 1440p Medium, indicating no drops below 60 in those cases.

Q: How does the Arc B580 compare to other GPUs in the database?

A: The Arc B580 has an average benchmark score of 23021, placing it in the 68th percentile. It performs within 1% of the AMD Radeon RX 580 2048SP, NVIDIA GeForce RTX 2080, and NVIDIA GeForce RTX 3080, making it a competitive mid-to-high range option.

Q: What is the highest FPS this combo can achieve in Inside?

A: The highest measured average FPS is 271 at 1920x1080 with Low settings. This represents the absolute maximum frame rate the combo can produce for this game.

Best Settings per Resolution

For each resolution, the best settings are defined as the most demanding preset that maintains an average FPS at or above 60. The data shows that this combo can handle high quality settings at all resolutions, with the exception of 4K Ultra.

At 3840x2160, the best settings are High, which produces an average of 61 FPS. This is the highest quality preset that stays above the 60 FPS threshold. Medium settings also work well with 98 FPS, but High offers better visual fidelity with minimal performance loss.

At 2560x1440, the best settings are Ultra, with an average of 93 FPS. This provides the maximum visual quality while still leaving a comfortable margin above the playable threshold. Low and Medium settings produce higher frame rates (195 and 156 FPS respectively), but Ultra is the best choice for image quality.

At 1920x1080, the best settings are also Ultra, delivering an average of 129 FPS. This is the most demanding preset and still provides over double the playable threshold. The combo has enough headroom to run Ultra settings without any concerns about performance.

The Verdict

The verdict is clear: this PC configuration can run Inside exceptionally well. The data shows that the AMD Ryzen 5 7500X3D and Intel Arc B580 combination clears the 60 FPS playable threshold at all tested resolutions and presets, with the single exception of 4K Ultra.

For 3840x2160, the combo is playable on High, Low, and Medium settings. High is the best choice as it delivers 61 FPS average, while Medium offers 98 FPS and Low offers 123 FPS. Ultra settings at 4K fall short at 58 FPS, so users should avoid that preset if they want to stay above the threshold.

For 2560x1440, all four presets are playable. Ultra is the best choice with 93 FPS, followed by High at 98 FPS, Medium at 156 FPS, and Low at 195 FPS. This resolution offers the best balance of visual quality and performance.

For 1920x1080, all presets are playable, with Ultra providing 129 FPS. This is the most demanding setting and still delivers more than double the playable threshold, making it the recommended choice for 1080p gaming.

In short, this combo is a strong performer for Inside. It can handle high-quality gaming at 4K, and it excels at 1440p and 1080p with Ultra settings. The only limitation is 4K Ultra, which falls just below 60 FPS. For anyone targeting 60 FPS or higher, the recommended settings are High at 4K, Ultra at 1440p, and Ultra at 1080p.