Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
351 FPS
Ultra 1080p Measured
189 FPS

1440p (2K / QHD)

Low 1440p Measured
285 FPS
Ultra 1440p Measured
136 FPS

4K (Ultra HD)

Low 4K Measured
179 FPS
Ultra 4K Measured
85 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 24,964
Graphics Card
Required 27,118
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 85 90 143 179
1440p QHD 136 143 228 285
1080p Full HD 189 198 317 351

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 198
1920x1080 Low 351
1920x1080 Medium 317
1920x1080 Ultra 189
2560x1440 High 143
2560x1440 Low 285
2560x1440 Medium 228
2560x1440 Ultra 136
3840x2160 High 90
3840x2160 Low 179
3840x2160 Medium 143
3840x2160 Ultra 85

Performance Analysis: Inside on Your System

This combo ranks 1148th out of 3716 tested combinations for Inside, placing it in the upper third of all tested systems. The CPU sits at the 77th percentile among all processors, while the GPU is at the 75th percentile among all graphics cards. With a playable threshold of 60 FPS, this system does not merely clear that bar — it demolishes it at every resolution and preset combination tested. The data shows a machine that is dramatically overqualified for this particular title, which is a 2016 puzzle platformer with modest graphical demands. At 4K Ultra, the combo still produces an average of 85 FPS, which is 42% above the playable threshold. The gap between this system’s capability and the game’s requirements is substantial, making the ranking position less about raw competitiveness and more about the fact that nearly all modern mid-range and high-end hardware can run Inside effortlessly.

How This Combo Ranks

The combo rank of 1148 out of 3716 places this system in the 69th percentile of all tested combinations for Inside. This is a strong position, though the ranking is somewhat misleading for this specific game. The benchmark data indicates that Inside is not a demanding title — even the lowest preset at 4K produces 179 FPS, which is nearly triple the playable threshold. The ranking reflects that many other tested combos achieve similarly high frame rates, because the game’s ceiling is reached quickly by most hardware.

The CPU’s average benchmark score of 24964 places it at the 77th percentile, with its nearest rival being the Intel Core i7-11850H at a 0.1% difference. The GPU’s average score of 29945 places it at the 75th percentile, with the NVIDIA GeForce RTX 5070 Mobile as the closest competitor at a 0.1% delta. These percentile positions suggest balanced hardware, but for Inside, the GPU is the limiting factor — though only marginally, as even the weakest component pairing would likely exceed 60 FPS. The data shows that this combo’s rank is more a function of the game’s low requirements than any weakness in the hardware itself.

CPU and GPU Roles

For Inside, the CPU’s role is minimal at all resolutions. The AMD Ryzen 5 7500F’s 6 cores and 12 threads, with a boost clock of 5.00 GHz, are far more than this game requires. The data shows that frame rates scale almost entirely with resolution and GPU load. At 1080p Low, the system produces 351 FPS, while at 1080p Ultra it drops to 189 FPS — a 46% reduction that is entirely attributable to GPU workload. The CPU’s single-thread score of 974 in 3DMark and 3218 in Cinebench R23 single-core are irrelevant here, as the game’s physics and logic are simple.

The GPU’s role becomes more pronounced as resolution increases. Moving from 1080p Ultra to 1440p Ultra, the average FPS drops from 189 to 136 — a 28% decrease. Moving from 1440p Ultra to 4K Ultra, the average drops from 136 to 85 — a 38% decrease. These scaling patterns show that the RTX 3070 Ti is the primary determinant of performance, with its 8 GB of GDDR6X memory and 608.3 GB/s bandwidth handling the frame buffer demands. The preset scaling is also informative: at 4K, the jump from Low (179 FPS) to Medium (143 FPS) to High (90 FPS) to Ultra (85 FPS) shows that each preset tier imposes a measurable GPU cost. The CPU never becomes a bottleneck, as evidenced by the fact that even at 1080p Low with 351 FPS, the system does not appear to hit a CPU-imposed ceiling.

Best Settings per Resolution

At 3840x2160 (4K), the most demanding preset that stays at or above 60 FPS is Ultra, which produces an average of 85 FPS. This is the highest preset available, and it clears the playable threshold by 42%. The data shows that even the most demanding settings at 4K are playable, with no preset dropping below 85 FPS.

At 2560x1440 (1440p), the best settings are also Ultra, delivering an average of 136 FPS. This is 127% above the 60 FPS threshold, indicating that the system has substantial headroom at this resolution. The frame rate at Ultra is more than double the playable threshold, making this the sweet spot for high refresh rate displays.

At 1920x1080 (1080p), the best settings are Ultra, with an average of 189 FPS. This is 215% above the playable threshold. The system could theoretically drive a 240 Hz monitor at this resolution with Ultra settings, as the average FPS is within range of such refresh rates, though the data does not confirm frame time consistency beyond the min/max values recorded at Medium settings.

Similar Performance Alternatives

The CPU’s nearest rivals, based on average benchmark scores, include the Intel Core i7-11850H (0.1% faster), AMD Ryzen 5 8400F (0.2% slower), Intel Core i7-13620H (0.2% faster), and Intel Core 5 210H (0.4% faster). These processors would behave nearly identically in Inside, as the game’s CPU demands are minimal. Any of these alternatives would produce the same frame rates in this title, given the GPU remains constant.

The GPU’s nearest rivals are the NVIDIA GeForce RTX 5070 Mobile (0.1% faster), AMD Radeon RX 6800 (0.5% slower), NVIDIA GeForce RTX 2080 Ti (0.5% faster), and AMD Radeon RX 6700 (1.6% slower). For Inside, these differences are negligible — a 1.6% delta would translate to roughly 3 FPS at 4K Ultra, which is imperceptible. The data suggests that swapping in any of these GPUs would yield virtually identical performance in this game, with all of them comfortably exceeding 60 FPS at every resolution and preset.

FAQ

*Q: Can this PC run Inside at 4K?*

A: Yes. At 3840x2160, the system produces an average of 85 FPS at Ultra settings, 90 FPS at High, 143 FPS at Medium, and 179 FPS at Low. All presets clear the 60 FPS playable threshold.

Q: What is the best preset to use at 1440p?

A: Ultra settings deliver an average of 136 FPS at 2560x1440, which is the highest preset available and well above the 60 FPS threshold.

Q: How does the RTX 3070 Ti compare to the RX 6800 for this game?

A: The RTX 3070 Ti has an average benchmark score of 29945, while the RX 6800 scores 30095, a 0.5% difference. In Inside, this translates to a negligible FPS difference that would be imperceptible in practice.

Q: Is the Ryzen 5 7500F a bottleneck for the RTX 3070 Ti in this game?

A: No. The CPU’s performance is far beyond what Inside requires. Even at 1080p Low with 351 FPS, the data shows no CPU-imposed ceiling, indicating the GPU remains the limiting factor.

Q: What frame rates can I expect at 1080p Ultra?

A: The average FPS at 1920x1080 Ultra is 189, with no min or max values recorded for this preset. At Medium settings, the min/max range is 270 to 365 FPS.

Q: Does the system maintain 60 FPS at 4K Ultra consistently?

A: The average FPS at 4K Ultra is 85, which is 42% above the threshold. While min FPS data is not provided for Ultra settings, the average suggests ample headroom above 60 FPS.

The Verdict

This system can run Inside at all tested resolutions and presets, with every combination exceeding the 60 FPS playable threshold. At 3840x2160, the best playable settings are Ultra with an average of 85 FPS. At 2560x1440, Ultra settings produce 136 FPS. At 1920x1080, Ultra settings deliver 189 FPS. The verdict is unambiguous: this PC runs Inside flawlessly at maximum settings across all resolutions, with frame rates that are 42% to 215% above the playable threshold. The system is overkill for this title, but that overkill ensures a perfectly smooth experience regardless of display resolution or graphics preference.

Measured FPS Breakdown

3840x2160 (4K):

  • Ultra: Average 85 FPS. No min/max recorded.
  • High: Average 90 FPS. No min/max recorded.
  • Medium: Average 143 FPS, with min 122 and max 165.
  • Low: Average 179 FPS. No min/max recorded.

2560x1440 (1440p):

  • Ultra: Average 136 FPS. No min/max recorded.
  • High: Average 143 FPS. No min/max recorded.
  • Medium: Average 228 FPS, with min 194 and max 263.
  • Low: Average 285 FPS. No min/max recorded.

1920x1080 (1080p):

  • Ultra: Average 189 FPS. No min/max recorded.
  • High: Average 198 FPS. No min/max recorded.
  • Medium: Average 317 FPS, with min 270 and max 365.
  • Low: Average 351 FPS. No min/max recorded.

The data shows consistent scaling across resolutions: dropping from 4K to 1440p increases Ultra FPS by 60%, and from 1440p to 1080p increases it by another 39%. The Medium preset at 1080p shows the tightest min/max spread (270-365), indicating stable frame pacing, while the 4K Medium spread (122-165) is wider but still well above the playable threshold. The system’s performance is uniformly excellent, with no preset or resolution combination approaching the 60 FPS floor.