Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

51%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
231 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
166 FPS
Ultra 1440p Measured
79 FPS

4K (Ultra HD)

Low 4K Measured
104 FPS
Ultra 4K Measured
50 FPS
8.7ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 24,964
Graphics Card
Required 27,118
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 50 52 83 104
1440p QHD 79 83 133 166
1080p Full HD 110 115 184 231

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 115
1920x1080 Low 231
1920x1080 Medium 184
1920x1080 Ultra 110
2560x1440 High 83
2560x1440 Low 166
2560x1440 Medium 133
2560x1440 Ultra 79
3840x2160 High 52
3840x2160 Low 104
3840x2160 Medium 83
3840x2160 Ultra 50

Performance Analysis: Inside on Your System

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce GTX 1070 sits in the lower-middle portion of the database’s tested combinations for Inside. With a rank of 3,056 out of 3,716 total CPU-GPU pairings recorded for this game, this combo is positioned below the median, meaning a substantial share of the tested systems deliver higher average frame rates. However, the game itself is a side-scrolling puzzle platformer with modest graphical demands, and the measured results show that this pairing still clears the 60 FPS threshold at most settings and resolutions. The data indicates the bottleneck is not the CPU, which ranks in the 77th percentile among all processors, but rather the GPU, which sits in the 47th percentile among all graphics cards. The GTX 1070 is an older Pascal-generation part, and its age shows primarily at 4K, where the highest presets struggle to hold 60 FPS. Still, for a game like Inside, the practical takeaway is that this system is playable across nearly the entire settings ladder, with only the most demanding 4K presets dipping below the target.

How This Combo Ranks

The combo’s rank of 3,056 out of 3,716 places it in the bottom 18% of all tested pairings for Inside. That sounds harsh, but the context matters: the database includes many high-end modern GPUs, and the GTX 1070 is a 2016-era card. The CPU, by contrast, is a current-generation AMD part, and its individual percentile rank of 77% among all CPUs shows it is far above average. The GPU’s 47th percentile rank is the limiting factor. The average benchmark score for the CPU is 24,964, while the GPU averages 9,780 across all recorded tests. The delta between these two components explains why the combo rank is low: the CPU has headroom, but the GPU caps the overall frame delivery. In Inside specifically, the game’s low polygon counts and simple lighting mean even a mid-tier GPU can produce high frame rates at lower resolutions. The measured FPS data confirms this: at 1080p, every preset from Low to Ultra averages above 110 FPS, and at 1440p, even Ultra averages 79 FPS. The rank is dragged down by 4K performance, where Ultra and High presets fall to 50 and 52 FPS respectively. Relative to the full field of combos, this system is not a top performer, but it is far from unusable for this title.

CPU and GPU Roles

The recorded data shows a clear split in workload responsibility. At 1080p, the CPU’s strength is sufficient to feed the GPU at very high frame rates: Low settings produce 231 FPS average, Medium 184 FPS, High 115 FPS, and Ultra 110 FPS. The scaling from Low to Ultra at 1080p is a 121 FPS drop, which indicates that the GPU is doing progressively more work as settings increase, but the CPU is not the limiting factor at any point. Moving to 1440p, the averages are 166 FPS on Low, 133 FPS on Medium, 83 FPS on High, and 79 FPS on Ultra. The drop from 1080p to 1440p at the same preset is roughly 28% to 40% depending on the setting, which is consistent with a GPU-bound scenario where resolution increases pixel throughput demand. At 4K, the GPU becomes the dominant constraint. Low settings average 104 FPS, Medium 83 FPS, but High drops to 52 FPS and Ultra to 50 FPS. The sharp falloff between Medium and High at 4K shows the GTX 1070 running out of raw fill rate and memory bandwidth. The CPU’s role is secondary throughout: even at 4K Ultra, the frame rate is not CPU-limited, as the Ryzen 5 7500F’s single-thread and multi-thread scores (3,218 in Cinebench R23 single-core, 22,799 in multi-core) are far above what a 2016 puzzle platformer requires. The database shows no resolution where lowering settings fails to improve FPS, which means the GPU is always the active bottleneck, not the CPU. The game’s simple rendering pipeline means the CPU sits mostly idle, waiting on the GPU to finish each frame.

FAQ

Q: Can this PC run Inside at 1080p with all settings maxed?

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 110 FPS, well above the 60 FPS playable threshold. Even the highest preset clears the target with a wide margin.

Q: What is the best settings preset for 1440p?

A: The verdict data lists Ultra as the best settings at 2560x1440, with an average FPS of 79. All four presets (Low, Medium, High, Ultra) are marked as playable at this resolution, meaning every setting option holds above 60 FPS.

Q: Is 4K playable on this system?

A: Partially. At 3840x2160, Low and Medium settings are playable, with averages of 104 FPS and 83 FPS respectively. High and Ultra are not playable, averaging 52 FPS and 50 FPS, which fall below the 60 FPS threshold.

Q: How much performance drops when going from 1080p to 4K at Medium settings?

A: At Medium settings, the average FPS goes from 184 at 1080p to 133 at 1440p and then to 83 at 4K. The drop from 1080p to 4K is 101 FPS, a 55% reduction, which reflects the GPU’s limited bandwidth at higher pixel counts.

Q: Does the CPU or GPU matter more for this game?

A: The GPU is the dominant factor. The CPU ranks in the 77th percentile among all processors, while the GPU ranks in the 47th percentile. The measured FPS scaling between resolutions and presets follows GPU workload patterns, not CPU limits.

Q: What frame rates can be expected at 1080p Low settings?

A: The database shows an average of 231 FPS at 1920x1080 with Low settings. This is the highest recorded average for this combo, indicating the GPU is nowhere near its limit at this configuration.

Similar Performance Alternatives

Looking at the CPU’s nearest rivals in the database, the AMD Ryzen 5 7500F has an average benchmark score of 24,964. The closest match is the AMD Ryzen 5 8400F with a score of 25,005, which is 0.2% higher. The Intel Core i7-11850H scores 24,935, just 0.1% lower. The Intel Core i7-13620H scores 24,911, 0.2% lower, and the Intel Core 5 210H scores 24,872, 0.4% lower. All four of these CPUs would deliver nearly identical CPU-side performance in Inside, meaning the frame rates would be unchanged if the same GTX 1070 were paired with any of them. The GPU’s nearest rivals are more varied. The GTX 1070 averages 9,780 across all benchmark tests. The AMD FirePro W5000 scores 9,803, which is 0.2% higher, and the NVIDIA Quadro M2000M scores 9,832, 0.5% higher. On the lower side, the NVIDIA Tesla M10 scores 9,724, 0.6% lower, and the NVIDIA Tesla C2070 scores 9,716, 0.7% lower. These GPU alternatives are not direct gaming equivalents, as some are workstation or compute cards, but their average scores indicate they would produce similar FPS in Inside. For practical gaming purposes, a system with any of these CPU alternatives and the same GPU would fall within the same performance band. The measured FPS numbers would shift by only a few frames, if at all, because the game is not CPU-sensitive. Similarly, swapping the GTX 1070 for a Quadro M2000M would not change the 1080p or 1440p results meaningfully, though the 4K High and Ultra presets would remain below 60 FPS.

Measured FPS Breakdown

The database contains measured FPS values for three resolutions and four settings each. At 1920x1080, Low settings produce an average of 231 FPS. Medium settings produce an average of 184 FPS, with a minimum of 157 FPS and a maximum of 212 FPS. High settings average 115 FPS. Ultra settings average 110 FPS. No min or max values are recorded for Low, High, or Ultra at 1080p, so only the Medium preset has frame variance data. At 2560x1440, Low averages 166 FPS. Medium averages 133 FPS, with a minimum of 113 FPS and a maximum of 153 FPS. High averages 83 FPS. Ultra averages 79 FPS. Again, only Medium has min and max recorded. At 3840x2160, Low averages 104 FPS. Medium averages 83 FPS, with a minimum of 71 FPS and a maximum of 96 FPS. High averages 52 FPS. Ultra averages 50 FPS. The pattern is consistent: Medium is the only preset for which the database captured frame time variance, and in all cases the minimum stays above 60 FPS at 1080p and 1440p, but at 4K the Medium minimum is 71 FPS, still above the threshold. The 4K High and Ultra presets have no min or max data, but their averages of 52 FPS and 50 FPS indicate they cannot sustain 60 FPS. The scaling from 1080p to 1440p at the same preset is roughly 28% to 31% lower for Low, Medium, and High, while Ultra drops 28% from 110 to 79 FPS. The scaling from 1440p to 4K is more severe: Low drops 37%, Medium drops 38%, High drops 37%, and Ultra drops 37%. This consistent percentage drop across presets confirms the GPU is the limiting factor, as the CPU would produce less uniform scaling if it were the bottleneck.

The Verdict

The verdict by resolution is clear. At 1920x1080, all four settings presets are playable, meaning they clear the 60 FPS threshold. The best settings are listed as Ultra, with an average FPS of 110. At 2560x1440, all four presets are also playable, and Ultra is the best settings choice with an average of 79 FPS. At 3840x2160, only Low and Medium are playable, with Low averaging 104 FPS and Medium averaging 83 FPS. High and Ultra are not playable, as their averages of 52 and 50 FPS fall below the 60 FPS target. For a gamer with a 1080p or 1440p monitor, this system runs Inside flawlessly at maximum settings. At 4K, the user must drop to Medium settings to maintain smooth frame rates, and even then, the minimum recorded FPS is 71, which provides a comfortable margin above 60. The data shows this is a playable setup for Inside across most of the settings spectrum, with the only caveat being 4K High and Ultra. The game’s 2016 release date and simple art style mean it does not require a high-end GPU, and the GTX 1070, despite its age, delivers enough performance for the vast majority of use cases. The CPU, being a modern six-core Zen 4 part, is never a concern. This combo is a workable solution for Inside, provided the user adjusts expectations at 4K. The recorded data does not include any frame time stutter or 1% low values, so the analysis relies on averages and the limited min/max data from the Medium preset. Those Medium preset minimums at 1080p, 1440p, and 4K are 157, 113, and 71 FPS respectively, all above 60. The verdict is positive: this PC can run Inside at 60 FPS or higher for every resolution and preset combination except 4K High and Ultra.