Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 58 | 93 | 116 |
| 1440p QHD | 88 | 92 | 148 | 185 |
| 1080p Full HD | 122 | 129 | 206 | 257 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 5 7400F paired with the AMD Radeon RX 6600 delivers a wide spread of performance in Inside, a 2016 puzzle platformer. The measured data shows this combination is more than capable of handling the game’s demands, with average frame rates ranging from 55 FPS at 4K Ultra to 257 FPS at 1080p Low. The following analysis breaks down the results by resolution and settings, examines the roles of the CPU and GPU, and compares this combo against similar hardware.
Measured FPS Breakdown
At 1920x1080, the combo produces excellent results across all presets. The Low setting averages 257 FPS, which is the highest frame rate recorded for this pairing. Moving to Medium, the average drops to 206 FPS, with a minimum of 175 FPS and a maximum of 237 FPS. The High preset averages 129 FPS, while the most demanding Ultra setting still manages a strong 122 FPS average. None of these 1080p results dip below the 60 FPS playable threshold, indicating a very comfortable experience at this resolution.
At 2560x1440, performance remains robust but scales down as expected. The Low preset averages 185 FPS, while Medium delivers 148 FPS on average, with a minimum of 126 FPS and a maximum of 170 FPS. The High setting averages 92 FPS, and Ultra produces an 88 FPS average. All four presets at 1440p stay well above the 60 FPS mark, showing that this hardware can handle higher resolutions without sacrificing smoothness.
At 3840x2160, the picture changes noticeably. The Low preset averages 116 FPS, and Medium follows with 93 FPS, a minimum of 79 FPS, and a maximum of 107 FPS. However, the High setting drops to 58 FPS, which falls just short of the 60 FPS playable threshold. The Ultra preset averages 55 FPS, also below the threshold. This resolution marks the boundary where the GPU starts to struggle with the heavier presets, though the lighter settings remain fully playable.
CPU and GPU Roles
The data reveals a clear pattern regarding which component matters more for Inside at different resolutions. At 1080p, the frame rates are exceptionally high, with the Low preset reaching 257 FPS. Such high numbers suggest the CPU is doing substantial work to feed the GPU, but the Ryzen 5 7400F’s strong single-threaded performance—evidenced by its Cinebench R23 single-core score of 3072—keeps the system from bottlenecking. The scaling from Low to Ultra at 1080p (257 down to 122 FPS) shows a 52% reduction, indicating that the GPU’s workload increases significantly with preset quality, but the CPU still keeps up.
Moving to 1440p, the frame rates drop by roughly 28% to 30% across presets compared to 1080p (e.g., Low from 257 to 185 FPS, Ultra from 122 to 88 FPS). This reduction is primarily due to the GPU having to render more pixels. The CPU’s role becomes less dominant here, as the RX 6600’s 8 GB of GDDR6 memory and 224.0 GB/s bandwidth are now the limiting factors. The GPU’s pixel rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s are adequate for 1440p, but the frame rate gap between Low and Ultra (185 vs. 88 FPS) highlights the GPU’s sensitivity to shading and texture work.
At 4K, the GPU is clearly the dominant constraint. The drop from 1440p Ultra (88 FPS) to 4K Ultra (55 FPS) is a 37% reduction, while the Low preset goes from 185 to 116 FPS (a 37% drop as well). The fact that 4K Ultra and High both fall below 60 FPS—55 and 58 FPS respectively—shows that the RX 6600’s 8 GB frame buffer and compute throughput (8.928 TFLOPS FP32) are not sufficient for the heaviest 4K workloads. The CPU, with its 6 cores and 12 threads, has ample headroom at this resolution, as the frame rates are entirely dictated by the GPU’s rendering capabilities.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the AMD Ryzen 5 7400F sits very close to several other processors. The Intel Core i5-14600T has an average benchmark score of 32707, which is just 0.1% lower than the Ryzen’s 32750. The Intel Core Ultra 7 155H scores 32697, a 0.2% difference, and the AMD Ryzen AI 7 PRO 360 is 0.3% higher at 32662. The AMD Ryzen 7 PRO 6850H is the only rival that scores slightly higher, at 32812, which is 0.2% above the Ryzen 5 7400F. In practice, these CPUs would deliver nearly identical performance in Inside, as the game is not heavily multi-threaded and the single-core scores (all within a few points) would yield similar frame rates at 1080p.
For the GPU, the NVIDIA Quadro K6000 matches the RX 6600’s average benchmark score of 19036 with a delta of 0%. The NVIDIA GeForce RTX 4050 Mobile is 0.1% lower at 19049, while the NVIDIA Tesla K20m is 0.3% lower at 19089. The NVIDIA RTX 2000 Ada Generation scores 18954, a 0.4% difference. These GPUs would behave comparably in Inside, meaning they would likely hit the same 58 FPS at 4K High and 55 FPS at 4K Ultra, while easily clearing 60 FPS at lower resolutions. The close benchmark scores suggest that swapping the RX 6600 for any of these cards would not change the overall verdict for this game.
FAQ
*Q: Can this combo run Inside at 4K with the High preset?*
A: No. The measured average FPS at 3840x2160 with High settings is 58, which is below the 60 FPS playable threshold. The Medium preset averages 93 FPS and is the best playable option at 4K.
Q: What is the highest preset that stays above 60 FPS at 1440p?
A: The Ultra preset at 2560x1440 averages 88 FPS, which is above the 60 FPS threshold. All four presets (Low, Medium, High, Ultra) at 1440p are playable.
Q: How does the RX 6600 compare to the RTX 4050 Mobile in this game?
A: The RX 6600’s average benchmark score is 19036, while the RTX 4050 Mobile scores 19049, a 0.1% difference. In Inside, this means the frame rates would be nearly identical, with the RTX 4050 Mobile likely matching the 58 FPS at 4K High and 122 FPS at 1080p Ultra.
Q: Is the Ryzen 5 7400F a bottleneck at 1080p?
A: The data suggests no. At 1080p Low, the combo reaches 257 FPS, which is very high. The CPU’s Cinebench R23 single-core score of 3072 indicates strong per-core performance, so it is not limiting the GPU at this resolution.
Q: What is the best settings preset for 4K?
A: The Medium preset at 3840x2160 is the most demanding that stays at or above 60 FPS, averaging 93 FPS. The High and Ultra presets fall below the threshold at 58 and 55 FPS respectively.
Q: Does the combo’s rank in the database indicate good performance?
A: The combo ranks 2869 out of 3716 tested combinations, placing it in the lower-middle range of all combos. However, this rank is across all games and hardware, and for Inside specifically, the measured FPS shows it is more than sufficient for most resolutions.
How This Combo Ranks
The combo’s rank in the database for Inside is 2869 out of 3716 tested combinations. This places it in the 77th percentile of all combos, meaning roughly 23% of tested systems perform worse. While this rank might seem low, it is important to consider that the database includes high-end hardware that far exceeds the RX 6600’s capabilities. For a mid-range GPU like the RX 6600, which sits in the 63rd percentile of all GPUs, this rank is expected. The CPU, in the 83rd percentile of all CPUs, is actually a stronger component relative to its peers. The measured FPS data confirms that the rank is not indicative of a poor experience in Inside—the game is not demanding enough to push this hardware to its limits at most settings.
Best Settings per Resolution
At 1920x1080, the best settings are Ultra, which averages 122 FPS. This is well above the 60 FPS threshold, and even the most demanding preset leaves plenty of headroom for smooth gameplay.
At 2560x1440, the best settings are also Ultra, averaging 88 FPS. This is comfortably above the 60 FPS threshold, allowing for maximum visual quality without compromising frame rate.
At 3840x2160, the best settings are Medium, which averages 93 FPS. The High preset drops to 58 FPS and Ultra to 55 FPS, both below the threshold, so Medium is the highest preset that maintains playability at 4K.
The Verdict
Yes, this PC can run Inside at most resolutions, but with a caveat at 4K. At 1920x1080, all presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, with the lowest average being 122 FPS on Ultra. At 2560x1440, all presets also clear 60 FPS, with Ultra averaging 88 FPS. At 3840x2160, only the Low and Medium presets are playable, with Medium averaging 93 FPS. The High and Ultra presets at 4K fall short at 58 and 55 FPS respectively, meaning users with a 4K display will need to lower settings to Medium for a smooth experience. Overall, the Ryzen 5 7400F and RX 6600 deliver solid performance for Inside, with the GPU being the limiting factor only at 4K with the heaviest presets.