Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 106 | 111 | 177 | 197 |
| 1440p QHD | 168 | 176 | 212 | 230 |
| 1080p Full HD | 194 | 197 | 237 | 257 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The data for the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5070 combination in Inside shows a system with significant performance headroom. Measured results place this configuration at rank 1357 out of 3716 tested combos for this title, which is a strong showing. The pairing handles the game’s stylized 2D environments with ease across all tested resolutions, with average frame rates that consistently exceed the 60 FPS playability threshold by a wide margin.
Measured FPS Breakdown
At 3840x2160, the system delivers a broad spread of performance depending on the graphics preset. The Low preset produces an average of 197 FPS, while Medium averages 177 FPS with a minimum of 151 FPS and a maximum of 204 FPS. Stepping up to High, the average drops to 111 FPS, and the Ultra preset yields an average of 106 FPS. Even at the most demanding Ultra setting, the frame rate remains well above the 60 FPS playability threshold, indicating that 4K resolution is not a barrier for this hardware.
Moving to 2560x1440, the frame rates climb substantially. The Low preset averages 230 FPS, while Medium reaches 212 FPS with a minimum of 180 FPS and a maximum of 244 FPS. High settings produce an average of 176 FPS, and Ultra settings average 168 FPS. The scaling from 4K to 1440p shows a clear performance gain, with the Ultra preset improving from 106 FPS to 168 FPS, a jump of roughly 58%. This suggests that resolution is a significant factor in the workload, but even at the higher resolution, the system is never constrained.
At 1920x1080, the results are the highest of the three resolutions. The Low preset averages 257 FPS, Medium averages 237 FPS with a minimum of 201 FPS and a maximum of 272 FPS, High averages 197 FPS, and Ultra averages 194 FPS. The 1080p Ultra score of 194 FPS is nearly double the 4K Ultra score of 106 FPS. The minimum recorded frame rate across all tested configurations is 151 FPS at 4K Medium, which means the system never dips below 150 FPS in any tested scenario. This level of performance indicates that the bottleneck for Inside is rarely, if ever, reached by this hardware.
Similar Performance Alternatives
The CPU and GPU each have nearby rivals that would produce broadly similar results in this game. For the AMD Ryzen 5 5600F, the nearest competitor is the Intel Core Ultra 5 225, which has an average benchmark score of 36938 compared to the Ryzen’s 36945, a delta of 0%. The AMD Ryzen 5 5500X3D scores 37018, which is 0.2% higher. The AMD Ryzen AI 7 PRO 450 scores 37093, 0.4% higher, and the Intel Core i9-12900T scores 37112, 0.5% higher. These differences are negligible in real-world gaming, so swapping the 5600F for any of these chips would likely result in nearly identical frame rates in Inside.
On the GPU side, the NVIDIA GeForce RTX 5070 has a more disparate set of nearest rivals. The AMD Radeon Pro 580 scores 40318, which is 0.1% higher than the RTX 5070’s average of 40377. The AMD Radeon Pro WX 7100 scores 40063, 0.8% lower, and the AMD Radeon Pro 5300 scores 40870, 1.2% higher. The NVIDIA RTX A500 Mobile scores 39568, 2% lower. While these professional-oriented cards are not typical gaming counterparts, the benchmark data suggests that they would land in a similar performance envelope for this title. Users looking for a comparable experience could expect frame rates within a few percent of the tested configuration with any of these alternatives.
CPU and GPU Roles
The benchmark results indicate that the GPU is the primary driver of performance scaling in Inside, though the CPU is more than sufficient to keep up. The most telling evidence is the frame rate progression across resolutions. At Ultra settings, the average frame rate drops from 194 FPS at 1080p to 168 FPS at 1440p, a 13% reduction, and then to 106 FPS at 4K, a 37% reduction from the 1440p figure. This steep decline as resolution increases is characteristic of a GPU-bound workload, where the rendering load grows with pixel count.
The CPU’s role becomes clearer when comparing presets at a fixed resolution. At 4K, the difference between Low and Medium is 20 FPS (197 to 177), while the difference between High and Ultra is only 5 FPS (111 to 106). This suggests that at higher presets, the GPU is working harder on effects and geometry, but the CPU still has headroom. The Ryzen 5 5600F’s PassMark single-thread score of 2872 and multithread score of 19236 place it in the 85th percentile of all CPUs, which is ample for a game like Inside that does not exhibit extreme multi-threaded demands. The data shows that the GPU is the limiting factor at 4K Ultra, but even then, it clears 100 FPS, so neither component is truly strained.
The Verdict
Yes, this PC can run Inside with outstanding results. According to the verdict data, every resolution and preset combination tested is playable, with all average frame rates clearing the 60 FPS threshold. At 3840x2160, the playable settings include High, Low, Medium, and Ultra, with the best setting being Ultra at an average of 106 FPS. At 2560x1440, all four presets are also playable, and Ultra runs at 168 FPS. At 1920x1080, Ultra again leads with 194 FPS. The system never approaches the playability limit, making it suitable for high-refresh-rate displays at 1080p and 1440p, and for smooth 4K gaming at maximum quality.
Best Settings per Resolution
For each resolution, the most demanding preset that remains at or above 60 FPS is the Ultra preset. At 3840x2160, Ultra settings produce an average frame rate of 106 FPS. At 2560x1440, Ultra settings run at 168 FPS. At 1920x1080, Ultra settings achieve 194 FPS. In all three cases, the average frame rate is more than 75% above the 60 FPS threshold, so users can confidently select Ultra without any concern for drops below playable levels. The minimum frame rates recorded only for Medium presets (151 FPS at 4K, 180 FPS at 1440p, 201 FPS at 1080p) suggest that even transient dips on Ultra would remain well above 60 FPS.
FAQ
Q: What is the average frame rate at 4K with Ultra settings?
A: The average frame rate at 3840x2160 with Ultra settings is 106 FPS.
Q: Which resolution and preset combination yields the highest average FPS?
A: The highest recorded average is 257 FPS at 1920x1080 with the Low preset.
Q: Does the system ever drop below 60 FPS in the tested configurations?
A: No. The lowest average frame rate recorded is 106 FPS at 4K Ultra, and the lowest minimum frame rate is 151 FPS at 4K Medium.
Q: How does the RTX 5070 compare to its nearest GPU rival in benchmark scores?
A: The RTX 5070 has an average benchmark score of 40377, while the AMD Radeon Pro 580 scores 40318, a delta of 0.1%.
*Q: What is the rank of this CPU and GPU combination among all tested combos for Inside?*
A: The combination is ranked 1357 out of 3716 total combinations.
Q: Is the CPU or GPU more influential on performance at 1440p?
A: The scaling from 1440p to 4K shows a 37% drop in Ultra preset frame rates, indicating the GPU is the primary factor as resolution increases, while the CPU maintains sufficient headroom.