Inside

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 5060 is a thoroughly modern combination facing a very lightweight challenge: Inside, Playdead's puzzle platformer released in 2016. The data shows this pairing doesn't merely run the game — it saturates it, clearing the 60 FPS threshold at every tested resolution and every preset, all the way to Ultra at 3840x2160. The following breakdown walks through the measured results step by step.

Measured FPS Breakdown

All figures below are measured average frame rates; minimum and maximum values were not recorded in this dataset.

At 1920x1080, the pairing is effectively untouchable by the game's demands. The Low preset returns 296.2 FPS, Medium returns 274.7 FPS, High returns 178.4 FPS, and Ultra returns 170.4 FPS. Note the compression between Low and Medium — barely a 22 FPS difference — followed by a sharp drop from Medium to High. That pattern suggests visual fidelity settings, not raw pixel count, are the dominant cost at this resolution for this title.

At 2560x1440, frame rates scale down gracefully. Low delivers 250.8 FPS, Medium 203.5 FPS, High 129.3 FPS, and Ultra 122.4 FPS. Even the most demanding preset clears double the 60 FPS playable threshold. The gap between High and Ultra remains narrow, at roughly seven frames, indicating that Inside's top preset adds little additional load.

At 3840x2160, the RTX 5060's 8 GB of GDDR7 and 448.0 GB/s memory bandwidth keep the experience smooth. Low averages 157.7 FPS, Medium 128.9 FPS, High 82.5 FPS, and Ultra 77.5 FPS. The High-to-Ultra delta is just five frames here, and Ultra remains comfortably above 60 FPS.

Across all twelve test configurations, not a single one falls below the playable threshold. The lowest recorded result — Ultra at 3840x2160, 77.5 FPS — still exceeds 60 FPS by a healthy margin.

Best Settings per Resolution

Using the 60 FPS threshold applied throughout this database, the most demanding preset that stays at or above 60 FPS is Ultra at every resolution:

• 1920x1080 — Ultra: 170.4 FPS average
• 2560x1440 — Ultra: 122.4 FPS average
• 3840x2160 — Ultra: 77.5 FPS average

There is no need to compromise. The verdict data confirms that Low, Medium, High, and Ultra are all playable settings at all three resolutions. A player wanting maximum headroom could drop to Medium at 4K for 128.9 FPS, but Ultra already delivers a frame rate well above what most displays can refresh at.

Similar Performance Alternatives

For the CPU side, the Ryzen 5 5600 sits in the 74th percentile of all tested processors with an average benchmark score of 20468. Its nearest rivals by aggregate score are remarkably close: the Intel Core Ultra 7 258V averages 20454 (a delta of just 0.1 percent), the AMD Ryzen 5 8500G averages 20425 (0.2 percent), the AMD EPYC 9454P averages 20422 (0.2 percent), and the AMD EPYC 7713 averages 20363 (0.5 percent). Any of these processors would deliver effectively identical CPU-side behavior in Inside; the deltas are fractions of a percent. That a desktop six-core and server-class EPYC parts cluster this tightly on aggregate score underscores how little this game stresses modern silicon.

For the GPU side, the RTX 5060 ranks in the 72nd percentile of all tested GPUs with an average benchmark score of 26331. Its nearest rivals include the AMD Radeon 860M at an average of 26401 (delta of -0.3 percent), the NVIDIA GeForce MX550 at 26421 (-0.3 percent), the AMD Radeon RX 5700 XT 50th Anniversary at 26553 (-0.8 percent), and the AMD Radeon RX 6750 XT at 26011 (1.2 percent). Based on these aggregate scores, hardware like the RX 6750 XT or the RX 5700 XT 50th Anniversary would be expected to produce broadly similar frame rates in Inside — though for a title this light, the margin between them is academic.

The Verdict

Yes — unequivocally. The verdict-by-resolution data lists Low, Medium, High, and Ultra as playable settings at 1920x1080, 2560x1440, and 3840x2160 alike. Best-settings results are 170.4 FPS at 1080p, 122.4 FPS at 1440p, and 77.5 FPS at 4K, all on the Ultra preset. Even the worst measured configuration in the entire dataset clears 60 FPS by over 17 frames. This combination runs Inside at maximum visual settings at every mainstream resolution, and does so with room to spare.

FAQ

Q: Can the Ryzen 5 5600 + RTX 5060 run Inside at 4K on Ultra settings?

A: Yes. Ultra at 3840x2160 averages 77.5 FPS, comfortably above the 60 FPS playable threshold.

Q: What is the highest frame rate this combo achieves in Inside?

A: 296.2 FPS, on the Low preset at 1920x1080.

Q: Which preset should I use at 1440p for the smoothest experience?

A: Ultra is already playable at 2560x1440 with 122.4 FPS average, so there is no need to lower settings. For even more headroom, Medium delivers 203.5 FPS.

Q: How much performance is lost going from 1080p Ultra to 4K Ultra?

A: Average frame rate drops from 170.4 FPS to 77.5 FPS — still above 60 FPS at both resolutions.

Q: Is the Ryzen 5 5600 a capable processor for this game?

A: The data indicates yes. It ranks in the 74th percentile of all tested CPUs, with a single-thread score of 882 in 3DMark and 2584 in Cinebench R23, and its aggregate score of 20468 puts it within half a percent of rivals like the Intel Core Ultra 7 258V.

Q: How does this pairing rank against other tested combinations for Inside?

A: It ranks 1710 out of 3716 tested combos — a mid-pack position overall, yet still fast enough to max out every setting in the game.

How This Combo Ranks

Within the Inside results table, this pairing holds rank 1710 of 3716 tested combinations — slightly below the median. That placement deserves context. Because Inside is a 2016 puzzle platformer with modest demands, the rankings at the top are dominated by combinations pushing extremely high frame rates at low settings; the 296.2 FPS this combo achieves at 1080p Low is simply outclassed by faster hardware that can go higher still. Mid-pack rank here does not indicate a marginal experience. Every configuration tested cleared 60 FPS, so the ranking measures excess headroom rather than playability. A combination that finishes in the middle of the pack while running Ultra at 4K above 77 FPS is more than sufficient for this title.

CPU and GPU Roles

The scaling data points to a GPU-bound profile at higher settings, with the CPU never becoming a meaningful factor. Moving from 1920x1080 Ultra to 2560x1440 Ultra costs 48 FPS (170.4 to 122.4), and moving again to 3840x2160 Ultra costs a further 44.9 FPS (122.4 to 77.5). Frame rate falling steadily as resolution climbs — with settings held constant — is the classic signature of a GPU-limited scenario, since pixel throughput demand rises with resolution while CPU load stays roughly flat. The RTX 5060, with its 48 ROPs and 119.9 GPixel/s pixel rate, is the component setting the ceiling at 4K.

Within a fixed resolution, the settings ladder tells the same story from the other direction. At 1080p, Low to Medium costs 21.5 FPS while Medium to High costs 96.3 FPS — a steep, non-linear step indicating the higher presets shift significant work onto the render pipeline. The Ryzen 5 5600, meanwhile, shows no sign of limitation: its 3DMark max-threads score of 5659 barely exceeds its 8-thread score of 4798 spread across more workers, and Inside's frame rates at Low settings — 296.2 FPS at 1080p — never plateau in a way that would suggest a processor cap. In short, at 1080p and 1440p both components loaf along; at 4K the GPU does the heavy lifting, and even then it delivers Ultra settings above 60 FPS.