Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 116 | 122 | 195 | 229 |
| 1440p QHD | 184 | 194 | 247 | 267 |
| 1080p Full HD | 226 | 229 | 275 | 298 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 4070 Ti delivers overwhelming performance in Inside, a 2016 puzzle platformer that places minimal stress on modern hardware. Across every tested resolution and preset combination, the measured frame rates exceed 100 FPS, with the lowest recorded average being 116 FPS at 4K Ultra settings. This combination ranks in the 802nd position out of 3,716 tested configurations, placing it comfortably within the top quarter of all systems in the database for this specific title.
Similar Performance Alternatives
The CPU and GPU each have distinct performance neighborhoods based on aggregate benchmark scores. The Ryzen 5 5600 achieves an average benchmark score of 20,468, placing it at the 74th percentile among all processors. Its nearest rivals in synthetic testing include the Intel Core Ultra 7 258V, which scores 20,454 (a mere 0.1% difference), and the AMD Ryzen 5 8500G at 20,425 (0.2% slower). Two AMD EPYC server processors, the 9454P and 7713, also land within 0.5% of the Ryzen 5 5600’s aggregate score, demonstrating that multi-threaded workload performance is broadly comparable across these very different market segments.
On the graphics side, the RTX 4070 Ti posts an average benchmark score of 44,795, sitting at the 84th percentile of all GPUs. Its closest comparable hardware includes the NVIDIA GeForce RTX 5090 Mobile, which scores 45,152 — a difference of only 0.8% in favor of the mobile part. The AMD Radeon Pro 5500 XT and Intel Arc A730M are also statistically near, with scores of 45,384 and 45,592 respectively, though these represent deltas of -1.3% and -1.7% relative to the RTX 4070 Ti. The NVIDIA RTX A6000 trails by 1.6% with a score of 44,075. For Inside, any of these rival components would deliver essentially identical frame rates, as the game’s modest graphical demands are far below what any of these GPUs can saturate.
CPU and GPU Roles
The data reveals an interesting dynamic in how CPU and GPU loads shift across resolutions. At 1080p, the system achieves 298 FPS on Low settings, which likely reflects a scenario where the CPU is the primary limiter, as the GPU has ample headroom to render far more frames than the processor can feed. Moving to 1440p Low, frame rates drop to 267 FPS, and at 4K Low, the system still manages 229 FPS. This scaling pattern — a 10% reduction from 1080p to 1440p and another 14% reduction from 1440p to 4K — suggests that the GPU begins to take on more responsibility as pixel count increases, though even at 4K the workload remains trivial for the RTX 4070 Ti.
The preset scaling tells a similar story. At 4K, moving from Low to Medium reduces average FPS by 34 frames (229 to 195), while Medium to High costs another 73 frames (195 to 122). The jump from High to Ultra is comparatively small at just 6 frames. This nonlinear scaling indicates that the Medium preset introduces a significant increase in GPU workload, while the difference between High and Ultra is minimal for this title. At 1440p and 1080p, the same pattern emerges: Medium costs roughly 20-25% of the Low preset’s frame rate, while High and Ultra are nearly identical to each other. This suggests the game’s rendering pipeline has a discrete jump in complexity at Medium, after which additional settings have diminishing returns.
Measured FPS Breakdown
At 3840x2160, the system delivers a wide range of performance depending on preset. Low settings produce an average of 229 FPS, while Medium drops to 195 FPS with a minimum of 166 and maximum of 224. High settings average 122 FPS, and Ultra is nearly identical at 116 FPS. The consistency between High and Ultra at 4K is notable — the difference of just 6 FPS suggests that the Ultra preset adds visual features that cost relatively little GPU throughput in this game.
Moving to 2560x1440, the performance envelope expands considerably. Low settings average 267 FPS, Medium reaches 247 FPS with a range of 210 to 284, High hits 194 FPS, and Ultra achieves 184 FPS. The gap between Low and Ultra at this resolution is 83 FPS, representing a 31% reduction in frame rate as settings are maximized. This is a smaller proportional penalty than at 4K, where the Low-to-Ultra gap is 113 FPS (49% reduction), indicating that resolution scaling interacts with preset complexity in this title.
At 1920x1080, the system approaches the practical limits of display refresh rates. Low settings produce 298 FPS, Medium averages 275 FPS with a spread of 234 to 317, High reaches 229 FPS, and Ultra delivers 226 FPS. The minimum frame rate recorded at 1080p Medium is 234 FPS, which exceeds the average frame rate of the High preset at the same resolution. This indicates that even the most demanding settings at 1080p cannot push the system below 226 FPS, leaving substantial headroom for any high-refresh-rate monitor. The 60 FPS playable threshold is exceeded by a factor of nearly four at the most demanding setting.
How This Combo Ranks
Within the database of 3,716 tested CPU-GPU combinations for Inside, this pairing ranks 802nd overall. This placement in the 78th percentile of all combos is noteworthy given that the CPU sits at the 74th percentile and the GPU at the 84th percentile among their respective categories. The combination’s rank is slightly higher than the CPU’s individual percentile, suggesting that the RTX 4070 Ti’s stronger relative standing compensates for the mid-range processor. However, the rank of 802 also implies that a substantial number of configurations — roughly 2,914 — deliver comparable or better performance in this game, which is unsurprising given how easily Inside runs on virtually any modern discrete GPU.
The gap between this combo and the top-performing systems is likely driven by CPU-bound scenarios at lower resolutions. At 1080p Low, the 298 FPS average may be constrained by the Ryzen 5 5600’s single-thread performance, which scores 882 in 3DMark single-thread tests and 2,584 in Cinebench R23 single-core. Higher-end CPUs with stronger single-core scores would likely push frame rates past 300 FPS at 1080p, though the practical benefit of such gains is minimal given that most displays cap at 240 Hz or lower.
The Verdict
The data is unambiguous: this system runs Inside at playable frame rates across every resolution and preset combination tested. The verdict by resolution confirms that all four settings — Low, Medium, High, and Ultra — are playable at 3840x2160, 2560x1440, and 1920x1080. The playable threshold of 60 FPS is cleared by a wide margin even in the most demanding scenario: 4K Ultra averages 116 FPS, nearly double the threshold. At 1440p Ultra, the average rises to 184 FPS, and at 1080p Ultra, the system delivers 226 FPS.
The consistency of these results across all nine tested configurations indicates that this hardware combination is massively overqualified for the game’s requirements. Even the weakest recorded performance — the 116 FPS average at 4K Ultra — represents a 93% margin above the playable threshold. The minimum frame rates recorded at Medium presets (166 FPS at 4K, 210 FPS at 1440p, 234 FPS at 1080p) further confirm that the system does not experience significant frame-time dips that would compromise the experience. There are no resolutions or settings where this combination fails to meet or exceed the 60 FPS target.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 116 FPS. This is the highest visual quality setting available in the test suite, and the system handles it with substantial headroom above the playable threshold. Users with 4K displays can confidently enable maximum settings without concern for performance.
At 2560x1440, the Ultra preset again delivers the best possible visual experience, averaging 184 FPS. This represents a 59% improvement over the 4K Ultra result, highlighting the reduced pixel count’s impact on GPU load. The 1440p resolution combined with Ultra settings produces a frame rate that exceeds most high-refresh-rate monitors’ capabilities, making this the sweet spot for competitive play or smooth exploration.
At 1920x1080, Ultra settings produce an average of 226 FPS, which is the highest frame rate achieved at maximum settings across any resolution. This performance level is sufficient to drive a 240 Hz monitor at nearly full refresh, though the 298 FPS on Low settings would be required to fully saturate a 300 Hz display. For most users, 1080p Ultra provides the best balance of visual fidelity and frame rate, with the 226 FPS average leaving no practical reason to reduce settings.
FAQ
Q: Can this system run Inside at 4K with maximum settings?
A: Yes. At 3840x2160 with Ultra settings, the system averages 116 FPS, which is nearly double the 60 FPS playable threshold. All four presets at 4K are marked as playable in the verdict data.
Q: What is the highest frame rate this combination achieves in Inside?
A: The highest recorded average is 298 FPS at 1920x1080 with Low settings. The maximum frame rate observed in any test is 317 FPS, recorded at 1080p Medium.
Q: How does the RTX 4070 Ti compare to its nearest GPU rivals?
A: The RTX 4070 Ti scores 44,795 on average benchmarks, placing it at the 84th percentile of all GPUs. It is 0.8% slower than the RTX 5090 Mobile, 1.3% slower than the Radeon Pro 5500 XT, 1.6% faster than the RTX A6000, and 1.7% faster than the Intel Arc A730M.
Q: Is the Ryzen 5 5600 a bottleneck for this game?
A: The data suggests minimal CPU limitation. At 1080p Low, the system reaches 298 FPS, and increasing resolution to 4K Low only reduces frame rates to 229 FPS. The CPU’s single-thread score of 882 in 3DMark places it at the 74th percentile, which is sufficient for this title’s modest processing demands.
Q: What is the difference in performance between High and Ultra presets?
A: At 4K, High averages 122 FPS while Ultra averages 116 FPS, a difference of 6 FPS. At 1440p, the gap is 10 FPS (194 vs 184), and at 1080p, the gap is 3 FPS (229 vs 226). The Ultra preset costs less than 5% of frame rate compared to High across all resolutions.
Q: How does this combo rank among all tested systems for Inside?
A: This pairing ranks 802nd out of 3,716 tested combinations, placing it in the top 22% of all configurations in the database for this game. The rank reflects the GPU’s 84th percentile standing, which partially compensates for the CPU’s lower 74th percentile.