Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
243 FPS
Ultra 1080p Measured
186 FPS

1440p (2K / QHD)

Low 1440p Measured
216 FPS
Ultra 1440p Measured
163 FPS

4K (Ultra HD)

Low 4K Measured
187 FPS
Ultra 4K Measured
124 FPS
5.4ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 17,507
Graphics Card
Required 27,118
Your GPU 54,209

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 124 134 170 187
1440p QHD 163 165 199 216
1080p Full HD 186 185 222 243

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 185
1920x1080 Low 243
1920x1080 Medium 222
1920x1080 Ultra 186
2560x1440 High 165
2560x1440 Low 216
2560x1440 Medium 199
2560x1440 Ultra 163
3840x2160 High 134
3840x2160 Low 187
3840x2160 Medium 170
3840x2160 Ultra 124

Performance Analysis: Inside on Your System

The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 4080 SUPER delivers very high frame rates in Inside across all tested resolutions and settings. The recorded data shows that this combination never dips near the playable threshold of 60 FPS, with the lowest average frame rate observed at 123.5 FPS at 4K with Ultra settings. This is a puzzle platformer with modest rendering demands, and the hardware pairing is far more powerful than the game requires. The following sections break down the measured performance, how this combo ranks among other tested configurations, and what settings are appropriate for each resolution.

Measured FPS Breakdown

The database contains measured average frame rates for Inside at three resolutions and four quality presets. Minimum and maximum frame rates were not recorded, so the analysis relies on the average FPS values.

At 1920x1080, the performance is extremely high across the board. The Low preset produces an average of 242.6 FPS, which is the highest frame rate recorded for this combination in the entire dataset. The Medium preset averages 221.5 FPS, a drop of 21.1 FPS from Low. The High preset averages 185 FPS, and the Ultra preset averages 185.5 FPS. Interestingly, the Ultra preset is slightly faster than High at this resolution, with a difference of just 0.5 FPS. The gap between Low and Ultra is 57.1 FPS, which indicates that settings have a measurable but not dramatic impact at 1080p. All four presets are far above the 60 FPS threshold, with even the slowest preset at this resolution, High, delivering more than triple the required frame rate.

At 2560x1440, the frame rates remain very high. The Low preset averages 216.1 FPS, which is 26.5 FPS lower than the same preset at 1080p. The Medium preset averages 198.8 FPS. The High preset averages 164.8 FPS. The Ultra preset averages 163.1 FPS, which is slightly lower than High by 1.7 FPS. The scaling from 1080p to 1440p shows a reduction in performance across all presets, with the largest drop observed at the Ultra setting, where the average falls from 185.5 FPS to 163.1 FPS, a decrease of 22.4 FPS. The difference between Low and Ultra at 1440p is 53 FPS, slightly narrower than the 57.1 FPS gap at 1080p. Every preset at this resolution still clears 60 FPS by a wide margin, with the lowest average being 163.1 FPS.

At 3840x2160, the performance scales down further but remains impressive. The Low preset averages 187.4 FPS. The Medium preset averages 169.7 FPS. The High preset averages 134.3 FPS. The Ultra preset averages 123.5 FPS, which is the lowest average frame rate recorded for this combination across all resolutions and settings. The drop from 1440p to 4K is most pronounced at the High preset, where the average falls from 164.8 FPS to 134.3 FPS, a reduction of 30.5 FPS. At the Ultra preset, the drop from 1440p to 4K is 39.6 FPS, from 163.1 FPS to 123.5 FPS. The gap between Low and Ultra at 4K is 63.9 FPS, the largest settings delta observed in the dataset. Despite this, the Ultra preset at 4K still delivers more than double the 60 FPS playable threshold.

The overall pattern shows that Inside is not a demanding title for this hardware. The RTX 4080 SUPER provides massive headroom, and even the most demanding preset at the highest resolution leaves a substantial margin above 60 FPS. The Ryzen 5 4600G, while not a top-tier processor, is sufficient to keep frame rates high in this game, as evidenced by the consistently high averages across all configurations.

How This Combo Ranks

The database ranks this combination of AMD Ryzen 5 4600G and NVIDIA GeForce RTX 4080 SUPER at position 1457 out of 3716 tested combos for Inside. This places the pairing in the upper portion of the tested configurations, roughly in the top 39 percent of all recorded combinations. The percentile data for the individual components supports this positioning. The CPU sits at the 71st percentile among all tested processors, while the GPU sits at the 86th percentile among all tested GPUs.

The combo rank of 1457 out of 3716 reflects the fact that the GPU is a very strong component, but the CPU is more modest in its standing. Inside is not a heavily threaded game, and the Ryzen 5 4600G, with its 6 cores and 12 threads, provides adequate processing power. The combination ranks well because the GPU dominates the performance picture in this title, and the CPU does not bottleneck it to any significant degree at the frame rates measured.

The position in the database suggests that many other tested combinations achieve similar or higher frame rates in Inside, primarily those pairing the RTX 4080 SUPER with stronger CPUs. However, the actual measured frame rates for this specific pairing are so high that the rank difference does not translate into a meaningful gameplay difference. A rank of 1457 out of 3716 still places this combo well above the median tested configuration, and the frame rates are far beyond what the game requires for smooth play.

When considering the individual component percentiles, the GPU is clearly the stronger part of this pairing. The 86th percentile ranking for the RTX 4080 SUPER indicates that it outperforms the vast majority of GPUs in the database. The CPU's 71st percentile ranking is respectable but not exceptional. In a game like Inside, where the graphical workload is relatively light, the GPU has more influence on the final frame rate, and this explains why the combo still performs so well despite the mid-range CPU.

Best Settings per Resolution

The database provides a clear recommendation for the best settings at each resolution based on the requirement of maintaining at least 60 FPS. The verdict data shows that all four presets are playable at all three resolutions, meaning Low, Medium, High, and Ultra all clear the 60 FPS threshold. The best settings, defined as the most demanding preset that stays at or above 60 FPS, is Ultra at every resolution.

At 1920x1080, the Ultra preset averages 185.5 FPS. This is the most demanding setting available, and it still delivers more than three times the playable threshold. The database confirms that Ultra is the best choice at this resolution, with an average frame rate of 185.5 FPS.

At 2560x1440, the Ultra preset averages 163.1 FPS. This is a reduction of 22.4 FPS compared to 1080p Ultra, but it remains far above 60 FPS. The best settings at 1440p are Ultra, with the recorded average of 163.1 FPS.

At 3840x2160, the Ultra preset averages 123.5 FPS. This is the lowest average frame rate in the entire dataset for this combination, but it still exceeds the 60 FPS threshold by more than double. The best settings at 4K are Ultra, with the recorded average of 123.5 FPS.

Since every preset at every resolution clears 60 FPS, there is no reason to compromise on visual quality with this hardware. The data indicates that users can enable the highest quality settings at any resolution and still enjoy frame rates well above the playable threshold. The largest performance cost comes from switching from Low to Ultra at 4K, where the average drops by 63.9 FPS, but even the lower average remains highly playable.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what other hardware would behave similarly in this configuration. These alternatives are based on average benchmark scores and are not specific to Inside, but they indicate which components are in the same performance tier.

For the AMD Ryzen 5 4600G, the nearest rivals in the database are the AMD Ryzen 3 PRO 5355GE, the AMD Ryzen 3 8300GE, the Intel Core 7 150U, and the Intel Core i3-14100T. The Ryzen 3 PRO 5355GE has an average score of 17482, which is 0.1 percent higher than the Ryzen 5 4600G's average score of 17507. The Ryzen 3 8300GE scores 17614, which is 0.6 percent higher. The Intel Core 7 150U scores 17395, which is 0.6 percent lower. The Intel Core i3-14100T scores 17648, which is 0.8 percent higher. These deltas are all within one percent of the Ryzen 5 4600G's average score, meaning any of these CPUs would produce nearly identical CPU-bound performance in Inside. The differences are so small that they would have no measurable impact on the frame rates recorded for this game.

For the NVIDIA GeForce RTX 4080 SUPER, the nearest rivals are the NVIDIA GeForce RTX 4080, the AMD Radeon Pro W5700X, the AMD Radeon RX 6750 GRE 12 GB, and the AMD Radeon 8060S. The RTX 4080 has an average score of 54247, which is 0.1 percent lower than the RTX 4080 SUPER's average score of 54209. The Radeon Pro W5700X scores 54828, which is 1.1 percent higher. The Radeon RX 6750 GRE 12 GB scores 55698, which is 2.7 percent higher. The Radeon 8060S scores 55757, which is 2.8 percent higher. These deltas are all small, and any of these GPUs would deliver very similar performance in Inside. The RTX 4080 is essentially identical in performance to the RTX 4080 SUPER, with a delta of just 0.1 percent. The other rivals are slightly higher in average score but still within a narrow band, meaning frame rates would be very close to what the RTX 4080 SUPER achieves in this game.

A system built with the Ryzen 5 4600G and any of these rival GPUs would produce frame rates within a few percent of the measured values. Similarly, a system with the RTX 4080 SUPER and any of the rival CPUs would show negligible differences in Inside, since the game is not heavily dependent on CPU performance beyond a certain point.

CPU and GPU Roles

The measured data reveals how the CPU and GPU each contribute to performance in Inside across different resolutions and presets. By examining the scaling between resolutions and presets, it is possible to determine which component matters more under different conditions.

The GPU load increases as resolution rises, which is expected. At 1920x1080, the frame rates are extremely high, with the Low preset reaching 242.6 FPS. At 2560x1440, the same preset drops to 216.1 FPS, a reduction of 26.5 FPS. At 3840x2160, the Low preset drops further to 187.4 FPS, another reduction of 28.7 FPS. This pattern shows that the GPU is being pushed harder at higher resolutions, and the frame rate decreases accordingly.

The settings preset also has a clear impact on GPU load. At 4K, the difference between Low and Ultra is 63.9 FPS, indicating that the GPU is sensitive to the quality settings. At 1440p, the difference between Low and Ultra is 53 FPS, and at 1080p it is 57.1 FPS. The settings impact is substantial at every resolution, but it is largest at 4K, which is consistent with the GPU being the primary bottleneck when rendering more pixels and applying more advanced effects.

The CPU's role is harder to isolate, but the data provides some clues. The Ryzen 5 4600G has a moderate benchmark profile, with a single-thread score of 726 in 3dmark and a multicore score of 4889 in 3dmark max threads. For a game like Inside, which is not a demanding title, the CPU is unlikely to be the limiting factor at any resolution. The fact that frame rates remain above 123.5 FPS even at 4K Ultra suggests that the CPU is keeping up with the GPU's output without becoming a bottleneck.

The scaling between resolutions indicates that the GPU becomes more dominant as resolution increases. At 1080p, the frame rates are so high that the CPU could potentially limit performance if the game were more demanding, but the measured averages show no signs of a CPU cap. At 4K, the GPU is clearly the limiting factor, as the frame rates drop significantly compared to 1080p while the CPU workload remains similar.

The settings presets also point to GPU dominance. Since the game is a puzzle platformer, the CPU workload from game logic and physics is relatively light. The large frame rate differences between Low and Ultra presets at each resolution are driven primarily by GPU rendering work, such as resolution scaling, texture quality, and post-processing effects. The CPU does not need to work much harder when the preset is changed from Low to Ultra, so the GPU is the component that determines the final frame rate in these scenarios.

Overall, the data shows that the RTX 4080 SUPER is the dominant component in this pairing for Inside. The GPU's performance dictates the frame rates at all resolutions and presets, while the Ryzen 5 4600G provides sufficient processing power to avoid becoming a bottleneck. At 1080p, the GPU is still the main factor, but the CPU becomes relatively more relevant as frame rates approach very high values. At 4K, the GPU is unambiguously the limiting factor, and the CPU has minimal influence on the measured performance.

The Verdict

The AMD Ryzen 5 4600G and NVIDIA GeForce RTX 4080 SUPER can run Inside with ease. The verdict data confirms that this combination is playable at every resolution and preset tested, with all configurations clearing the 60 FPS threshold.

At 1920x1080, the best settings are Ultra, with an average frame rate of 185.5 FPS. The Low preset reaches 242.6 FPS, Medium averages 221.5 FPS, and High averages 185 FPS. All of these are far above the playable threshold, and there is no scenario at this resolution where the game would feel anything less than smooth.

At 2560x1440, the best settings are also Ultra, with an average frame rate of 163.1 FPS. The Low preset averages 216.1 FPS, Medium averages 198.8 FPS, and High averages 164.8 FPS. The performance at this resolution is slightly lower than at 1080p, but the margin above 60 FPS remains enormous.

At 3840x2160, the best settings are Ultra, with an average frame rate of 123.5 FPS. The Low preset averages 187.4 FPS, Medium averages 169.7 FPS, and High averages 134.3 FPS. Even the most demanding configuration, 4K Ultra, delivers more than double the playable threshold, with 123.5 FPS.

The database lists all four presets as playable at all three resolutions, and the recommended best settings is Ultra in every case. There is no resolution or preset combination in the measured data that falls below 60 FPS, so users can confidently enable the highest quality settings without worrying about performance. The RTX 4080 SUPER provides massive graphical headroom, and the Ryzen 5 4600G is sufficient to support the high frame rates that this GPU can produce in Inside. This system does not just run the game; it runs it at frame rates that would support high refresh rate displays at 1080p and 1440p, and it still delivers a very smooth experience at 4K.