Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Inside
Puzzle Platformer 2016

Inside

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
234 FPS
Ultra 1080p Measured
177 FPS

1440p (2K / QHD)

Low 1440p Measured
210 FPS
Ultra 1440p Measured
159 FPS

4K (Ultra HD)

Low 4K Measured
180 FPS
Ultra 4K Measured
116 FPS
5.6ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 17,035
Graphics Card
Required 27,118
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 116 122 166 180
1440p QHD 159 162 194 210
1080p Full HD 177 180 216 234

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 180
1920x1080 Low 234
1920x1080 Medium 216
1920x1080 Ultra 177
2560x1440 High 162
2560x1440 Low 210
2560x1440 Medium 194
2560x1440 Ultra 159
3840x2160 High 122
3840x2160 Low 180
3840x2160 Medium 166
3840x2160 Ultra 116

Performance Analysis: Inside on Your System

Measured FPS Breakdown

The recorded data for this AMD Ryzen 5 3600 and NVIDIA GeForce RTX 4070 Ti combination in Inside shows exceptionally high frame rates across all tested configurations. The benchmark suite captured average, minimum, and maximum FPS values for four quality presets at three resolutions, though complete min/max data was only logged for the Medium preset at each resolution.

At 1920x1080, the combination delivers its highest raw performance. The Low preset averages 234 FPS, which is the fastest recorded result in the entire dataset. Moving up the quality ladder, Medium averages 216 FPS with a minimum of 184 FPS and a maximum of 249 FPS. High settings produce an average of 180 FPS, while the most demanding Ultra preset still maintains an average of 177 FPS. The gap between Low and Ultra at this resolution is 57 FPS, indicating that the quality settings have a measurable impact, but the hardware headroom remains substantial even at the top end.

At 2560x1440, the pattern holds with slightly reduced performance. Low settings average 210 FPS, Medium averages 194 FPS with a minimum of 165 FPS and a maximum of 223 FPS. High settings produce 162 FPS on average, and Ultra settles at 159 FPS. The delta between Low and Ultra here is 51 FPS, slightly narrower than at 1080p, which suggests the GPU remains the dominant factor but the resolution scaling is modest for this particular game engine.

The 3840x2160 results show the largest performance drop when moving to 4K, but the numbers remain far above typical display refresh rates. Low settings average 180 FPS, Medium averages 166 FPS with a minimum of 141 FPS and a maximum of 191 FPS. High settings drop to 122 FPS, and Ultra produces 116 FPS on average. The spread from Low to Ultra at 4K is 64 FPS, the widest gap across all resolutions, implying that the pixel count amplifies the difference between quality presets.

Notably, the min/max data recorded for Medium settings at each resolution shows consistent frame pacing. At 1080p, the minimum of 184 FPS is 85% of the average. At 1440p, the minimum of 165 FPS is 85% of the average as well. At 4K, the minimum of 141 FPS drops to 85% of the average 166 FPS. This consistency suggests the game maintains stable frame delivery without severe hitches, even when the GPU is working harder at higher resolutions.

Best Settings per Resolution

The verdict data identifies the most demanding preset that remains at or above 60 FPS for each resolution. Given the extremely high average frame rates recorded, every tested preset at every resolution clears this threshold comfortably.

At 1920x1080, the best settings are Ultra, which averages 177 FPS. This is nearly three times the playability threshold of 60 FPS, leaving enormous headroom for future content or background tasks. The Low preset at 234 FPS and Medium at 216 FPS are also fully playable, but Ultra offers the maximum visual quality without sacrificing smoothness.

At 2560x1440, Ultra again qualifies as the best settings with an average of 159 FPS. The drop from 1080p Ultra to 1440p Ultra is 18 FPS, a modest penalty for the resolution increase. Even the lowest recorded value among the tested presets at this resolution, which is the Medium minimum of 165 FPS, remains far above the 60 FPS threshold.

At 3840x2160, the best settings are also Ultra, averaging 116 FPS. This is the most demanding configuration tested, and it still delivers nearly double the playability threshold. The 4K Ultra result is 61 FPS lower than the 1080p Ultra result, but the absolute performance remains strong. The fact that Ultra is recommended at every resolution indicates that this combination has no practical settings limitation for Inside.

FAQ

Q: What is the highest average FPS recorded for this combination in Inside?

A: The highest average FPS is 234, achieved at 1920x1080 with Low settings.

Q: Does the RTX 4070 Ti maintain above 60 FPS at 4K with Ultra settings?

A: Yes, the average FPS at 3840x2160 with Ultra settings is 116, which is well above the 60 FPS playability threshold.

Q: How much performance is lost when moving from 1080p to 4K at Ultra settings?

A: The average FPS drops from 177 at 1920x1080 to 116 at 3840x2160, a decrease of 61 FPS.

Q: What are the minimum FPS values recorded for Medium settings across resolutions?

A: At 1920x1080 the minimum is 184 FPS, at 2560x1440 it is 165 FPS, and at 3840x2160 it is 141 FPS.

Q: Which resolution and preset combination produces the highest maximum FPS?

A: The highest recorded maximum is 249 FPS, achieved at 1920x1080 with Medium settings.

Q: Are there any settings or resolutions where this combination fails to reach 60 FPS?

A: No, every tested preset at every resolution exceeds 60 FPS, with the lowest average being 116 FPS at 4K Ultra.

How This Combo Ranks

Within the database of tested combinations for Inside, this pairing of AMD Ryzen 5 3600 and NVIDIA GeForce RTX 4070 Ti ranks 1612 out of 3716 total combinations. This places it in the upper 43 percent of all tested systems, meaning it outperforms more than half of the configurations in the database while trailing a substantial number of higher-end pairings.

The rank reflects the balance between the CPU and GPU components. The Ryzen 5 3600 sits in the 71st percentile among all CPUs in the database, with an average benchmark score of 17035. The RTX 4070 Ti performs at the 84th percentile among GPUs, with an average benchmark score of 44795. The combination of a mid-upper CPU and an upper-tier GPU produces strong results, but the CPU likely limits the absolute ceiling in a game like Inside that can run at very high frame rates.

The gap between this rank and the top combinations in the database is driven primarily by CPU performance. The recorded FPS values at 1080p, where the CPU often becomes the bottleneck at very high frame rates, show that the system reaches 234 FPS at Low settings. Systems with faster CPUs would likely push higher, but the GPU still has enough headroom to keep this combination well within playable territory.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 3600 in the database include the Intel Core i7-1260P, which scores 17007 with a delta of 0.2 percent, meaning it is effectively identical in performance. The Intel Core i5-11400 scores 17067 with a delta of -0.2 percent, also matching the Ryzen 5 3600 within a fraction of a percent. The AMD EPYC 7573X and AMD EPYC 7742 both appear nearby with scores of 17070 and 16998 respectively, though these server-class chips would behave differently in gaming workloads due to their architecture and power characteristics.

For the GPU, the nearest rivals include the NVIDIA GeForce RTX 5090 Mobile with a score of 45152 and a delta of -0.8 percent, making it slightly faster than the RTX 4070 Ti. The AMD Radeon Pro 5500 XT scores 45384 with a delta of -1.3 percent, also slightly faster. The NVIDIA RTX A6000 scores 44075 with a delta of 1.6 percent, placing it slightly slower. The Intel Arc A730M scores 45592 with a delta of -1.7 percent, the fastest of the listed rivals.

In practical terms, swapping the Ryzen 5 3600 for any of the listed CPU rivals would produce nearly identical benchmark results, as the deltas are all within 0.2 percent. Similarly, substituting the RTX 4070 Ti with any of the GPU rivals would shift performance by less than 2 percent. This means a system with an Intel Core i5-11400 and an NVIDIA RTX A6000, for example, would deliver very similar FPS in Inside to the tested configuration. The same applies for an Intel Core i7-1260P paired with an AMD Radeon Pro 5500 XT.

The Verdict

The verdict data is unambiguous: this combination can run Inside at all tested resolutions and presets with performance far exceeding the 60 FPS playability threshold. At 3840x2160, the playable settings include High, Low, Medium, and Ultra, with the best settings being Ultra at an average of 116 FPS. At 2560x1440, all four presets are playable, and Ultra averages 159 FPS. At 1920x1080, all presets are playable as well, with Ultra averaging 177 FPS.

The lowest average FPS recorded in the entire dataset is 116 at 4K Ultra, which is still 93 percent above the 60 FPS threshold. The highest average is 234 at 1080p Low. For players seeking maximum visual fidelity, Ultra settings at 4K provide the best balance of image quality and performance. For players prioritizing frame rate, 1080p Low at 234 FPS is the fastest option, though even 4K Medium at 166 FPS offers a very smooth experience.

Given that this game was released in 2016, the hardware is far more powerful than necessary for the title. The data shows no scenario where this combination struggles to maintain smooth gameplay, and the frame rates are high enough to support high refresh rate monitors at every resolution tested.

CPU and GPU Roles

The recorded data reveals how the CPU and GPU contributions shift across resolutions and presets. At 1920x1080, the difference between Low and Ultra is 57 FPS, from 234 down to 177. This gap suggests that the GPU is handling the increased rendering load of higher quality settings, but the CPU is also being exercised more as frame rates rise. The fact that Low settings reach 234 FPS indicates the CPU is capable of feeding the GPU at very high rates, but the 57 FPS drop at Ultra shows the GPU is the primary limiter when quality increases.

At 2560x1440, the Low to Ultra gap narrows to 51 FPS. This narrowing suggests that as resolution increases, the GPU becomes more dominant, and the CPU has less influence on the final frame rate. The absolute numbers drop slightly from 1080p, but the pattern remains consistent: higher settings cost more GPU performance, while the CPU stays relatively constant in its workload.

At 3840x2160, the Low to Ultra gap widens to 64 FPS, the largest of any resolution. This widening indicates that at 4K, the GPU is working significantly harder at Ultra settings, while the CPU workload remains largely unchanged. The 4K Low result of 180 FPS versus the 1080p Low result of 234 FPS shows a 54 FPS drop purely from resolution scaling, which is GPU bound. However, the 4K Ultra result of 116 FPS versus 1080p Ultra of 177 FPS shows a 61 FPS drop, confirming that the GPU bears most of the additional burden at higher resolutions and settings.

The CPU's role is most visible at low settings and low resolutions, where it must generate frames fast enough to keep the GPU fed. The Ryzen 5 3600, with its 6 cores and 12 threads, manages this well, as evidenced by the 234 FPS result at 1080p Low. At higher resolutions, the GPU takes over as the limiting factor, and the CPU becomes less critical. The data indicates that for Inside, the RTX 4070 Ti is the dominant component at 4K and at Ultra presets, while the Ryzen 5 3600 remains sufficient even at the most CPU-intensive configurations tested.