Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 99 | 105 | 164 | 181 |
| 1440p QHD | 157 | 163 | 195 | 213 |
| 1080p Full HD | 174 | 178 | 214 | 236 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 3080 Ti delivers exceptional performance in Inside, a puzzle platformer that proves far less demanding than the GPU’s high-end specifications might suggest. The recorded data shows this combination not only clears the 60 FPS threshold at every tested setting, but does so with substantial headroom, making it a candidate for maximum visual fidelity on high refresh rate displays.
Best Settings per Resolution
The database measurements indicate that the most demanding preset, Ultra, remains comfortably above 60 FPS across all three tested resolutions. For 1920x1080, the Ultra preset achieves an average of 174.4 FPS, which is the highest playable setting available. At 2560x1440, Ultra again provides the best experience with an average of 156.9 FPS. Even at 3840x2160, the Ultra preset holds an average of 98.9 FPS, well above the 60 FPS playability threshold. Since all settings, from Low to Ultra, surpass 60 FPS at every resolution, the recommendation is straightforward: use the Ultra preset universally. The data shows no scenario where dropping to High, Medium, or Low would be necessary for playability, as even the lowest recorded averages at Ultra remain far above the threshold.
How This Combo Ranks
Within the database’s tested combinations for Inside, this specific pairing ranks 1704 out of 3716 total combos, placing it in the upper half of all systems evaluated. The percentile standings of the individual components reinforce this position: the Ryzen 5 3600 sits at the 71st percentile among all CPUs, while the RTX 3080 Ti ranks at the 83rd percentile among all GPUs. The rank of 1704 of 3716 indicates that while this is a strong configuration, many other combos in the database achieve higher performance in this title, likely due to more recent CPU generations or higher-end GPUs. However, the measured FPS data shows that the practical difference at these frame rates may be minimal for a game like Inside, where the Ultra preset already produces triple-digit averages at 4K.
Measured FPS Breakdown
At 1920x1080, the Low preset delivers an average of 235.9 FPS. Medium increases the visual load but still achieves 213.7 FPS. High settings produce 177.9 FPS, while Ultra drops to 174.4 FPS. The scaling from Low to Ultra represents a reduction of approximately 61.5 FPS, yet even the lowest figure remains nearly three times the 60 FPS threshold.
At 2560x1440, the pattern repeats with narrower margins. Low averages 212.7 FPS, Medium reaches 195 FPS, High hits 163.2 FPS, and Ultra settles at 156.9 FPS. The difference between Low and Ultra here is 55.8 FPS, slightly less than at 1080p, indicating that the GPU remains the dominant factor even as resolution increases.
At 3840x2160, the performance curve steepens. Low averages 181.2 FPS, Medium drops to 163.7 FPS, High produces 104.5 FPS, and Ultra bottoms out at 98.9 FPS. The gap between Low and Ultra grows to 82.3 FPS, showing that 4K resolution amplifies the cost of higher settings. Notably, the jump from Medium to High at 4K is the largest single-step drop in the entire dataset, from 163.7 FPS down to 104.5 FPS, a difference of 59.2 FPS. This suggests that High settings introduce a significant rendering load increase at 2160p, likely related to shadow quality or post-processing effects that scale with pixel count.
Across all resolutions, the minimum and maximum FPS values were not recorded in the database, so the analysis relies solely on average frame rates. The consistency implied by the narrow gaps between resolutions and presets still supports a smooth experience, particularly because the averages never approach the playability threshold.
Similar Performance Alternatives
The CPU’s nearest rivals in the database include the Intel Core i7-1260P, which scores 0.2% higher on average, and the Intel Core i5-11400, which scores 0.2% lower. Two AMD EPYC server processors, the EPYC 7573X and EPYC 7742, also appear within 0.2% of the Ryzen 5 3600’s average benchmark score. These deltas are negligible, meaning any of these CPUs would likely produce nearly identical frame rates in Inside when paired with the same GPU.
On the GPU side, the RTX 3080 Ti’s nearest rivals are the AMD Radeon Pro 5300, which scores 0.8% higher on average, and the NVIDIA GeForce RTX 5070, which scores 2% lower. Two NVIDIA Tesla compute cards, the Tesla M40 24 GB and the Tesla M40, score 1.2% and 1.7% lower, respectively. The RTX 5070 is the most relevant consumer alternative, and its 2% lower average score suggests it would perform within a few frames per second of the RTX 3080 Ti in this game. The Radeon Pro 5300, despite being a workstation card, benchmarks slightly higher on average, though its driver optimization for gaming may differ. For a user considering a similar build, swapping the CPU to an i5-11400 or i7-1260P would yield no meaningful change in Inside, and moving to an RTX 5070 would only slightly reduce frame rates.
CPU and GPU Roles
The data reveals an interesting dynamic between the CPU and GPU in Inside. At 1920x1080, the difference between Low and Ultra is 61.5 FPS, while at 2560x1440 it is 55.8 FPS, and at 3840x2160 it grows to 82.3 FPS. If the game were purely GPU-bound, the absolute FPS difference between settings would typically widen as resolution increases, because the GPU does more work per frame. The data partially supports this, with the 4K gap being the largest, but the 1440p gap being smaller than 1080p contradicts a simple GPU-bound model. This suggests that at lower resolutions, such as 1080p, the CPU plays a more significant role in setting the ceiling, while the GPU still handles the increased load from higher settings. At 1440p, the balance shifts slightly, and at 4K, the GPU becomes the clear bottleneck, as evidenced by the steep drop from Medium to High.
The Ryzen 5 3600’s single-thread performance, as measured by a Geekbench single-core score of 1536 and a 3DMark single-thread score of 696, is adequate for this title, but it does limit the upper frame rates at 1080p. The RTX 3080 Ti, with its 34.10 TFLOPS FP32 throughput and 912.4 GB/s memory bandwidth, is capable of far higher frame rates than the CPU can feed at low resolutions. This explains why the Low preset at 1080p averages 235.9 FPS, while the same preset at 1440p averages 212.7 FPS, a smaller drop than the 4K Low figure of 181.2 FPS. The GPU’s dominance grows with resolution, and the data suggests that Inside is a title where the CPU matters most at 1080p, while the GPU takes over at 1440p and especially at 4K.
The Verdict
The verdict from the database is unambiguous: this PC can run Inside at all tested resolutions and settings, with every configuration clearing the 60 FPS threshold. At 1920x1080, the Ultra preset delivers 174.4 FPS, at 2560x1440 it delivers 156.9 FPS, and at 3840x2160 it delivers 98.9 FPS. The playable settings list for each resolution includes High, Low, Medium, and Ultra, confirming that no setting requires compromise. For a game like Inside, which relies on atmospheric lighting and subtle visual details, the Ultra preset at 4K remains the ideal choice, as the 98.9 FPS average provides smooth motion while preserving the intended artistic presentation. The only theoretical concern is the lack of recorded minimum FPS data, but the high averages make frame drops below 60 FPS unlikely. This combination is more than sufficient for the game, and users with high refresh rate monitors can expect a fluid experience at any resolution.
FAQ
Q: What is the highest playable setting at 1920x1080 for this system?
A: The Ultra preset is the best setting, achieving an average of 174.4 FPS, which is well above the 60 FPS playability threshold.
Q: How does this combo rank among all tested configurations in Inside?
A: It ranks 1704 out of 3716 total combos, placing it in the upper half of the database’s tested systems.
Q: At 3840x2160, what is the average FPS difference between Low and Ultra settings?
A: The Low preset averages 181.2 FPS, while Ultra averages 98.9 FPS, representing a difference of 82.3 FPS. Both remain playable.
Q: Which CPU would perform similarly to the Ryzen 5 3600 in this game?
A: The Intel Core i7-1260P scores 0.2% higher on average, and the Intel Core i5-11400 scores 0.2% lower, making either a near-identical alternative.
Q: Is the GPU or CPU more important for Inside at 2560x1440 with an RTX 3080 Ti paired with a Ryzen 5 3600 with a Ryzen 5 3600?
A: At 2560x1440, the GPU becomes the dominant factor, as the difference between Low and Ultra settings narrows to 55.8 FPS, and the CPU’s role diminishes compared to 1080p.
Q: Can this system run Inside at 60 FPS on Ultra at 4K?
A: Yes, the Ultra preset at 3840x2160 averages 98.9 FPS, which is 38.9 FPS above the 60 FPS threshold.