Instant compatibility check with FPS benchmarks and optimization tips
Inside
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 64 | 102 | 127 |
| 1440p QHD | 97 | 101 | 162 | 203 |
| 1080p Full HD | 134 | 141 | 216 | 234 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Inside on Your System
The AMD Ryzen 5 3600 and AMD Radeon RX 7600 combination delivers a wide range of performance in Inside, a puzzle platformer that is not particularly demanding on modern hardware. The recorded measurements show that this pairing can handle the game at every tested resolution and preset level, with average frame rates that consistently clear the 60 FPS threshold. The data indicates that 1080p and 1440p play are exceptionally smooth, while 4K remains very playable even at the highest settings.
Measured FPS Breakdown
The measured FPS data for this CPU and GPU pairing in Inside covers three resolutions and four settings levels, providing a complete picture of performance scaling.
At 1920x1080, the lowest tested resolution, frame rates are extremely high across all settings. With Low settings, the average FPS reaches 234. Medium settings produce an average of 216 FPS, with recorded minimum and maximum values of 184 and 249 FPS respectively, showing tight frame pacing. High settings still deliver an average of 141 FPS. Ultra settings, the most demanding preset, maintain an average of 134 FPS. None of these results approach the playable threshold of 60 FPS, meaning the system has substantial headroom at this resolution.
Moving to 2560x1440, performance remains strong but begins to show the expected scaling. Low settings yield an average of 203 FPS, which is a 31 FPS drop compared to 1080p Low. Medium settings average 162 FPS, with a minimum of 138 and maximum of 186 FPS. High settings average 101 FPS, and Ultra settings average 97 FPS. The gap between High and Ultra at this resolution is only 4 FPS, suggesting that the visual difference between these presets has a minimal impact on this hardware. All results remain far above the 60 FPS threshold.
At 3840x2160, the highest resolution tested, the system still delivers playable performance across the board. Low settings average 127 FPS, which is a substantial drop from the 203 FPS at 1440p Low but still more than double the playable threshold. Medium settings average 102 FPS, with recorded minimum and maximum values of 87 and 117 FPS. The minimum of 87 FPS confirms that even in the most demanding moments, the frame rate does not dip below the 60 FPS line. High settings average 64 FPS, which is just above the threshold. Ultra settings average 61 FPS, matching the definition of playable but leaving little margin for frame drops. The data shows that 4K Ultra is the most demanding configuration in this test, and it barely clears the 60 FPS mark.
The pattern across resolutions is clear: Inside is not a graphically intensive title, and this combination of CPU and GPU delivers frame rates that are suitable for high refresh rate displays at 1080p and 1440p. Even at 4K, the only settings that approach the threshold are High and Ultra, with averages of 64 and 61 FPS respectively. The lack of recorded minimum values for High and Ultra at 4K means the data does not specify worst-case frame times, but the averages suggest consistent performance.
Similar Performance Alternatives
The database includes nearest rival comparisons for both the CPU and GPU, which helps contextualize how other hardware would behave in this same scenario.
For the AMD Ryzen 5 3600, the nearest rivals are four processors with very similar average benchmark scores. The Intel Core i7-1260P has an average score of 17007, which is 0.2 percent below the Ryzen 5 3600's score. The Intel Core i5-11400 scores 17067, which is 0.2 percent above. The AMD EPYC 7573X scores 17070, also 0.2 percent above. The AMD EPYC 7742 scores 16998, which is 0.2 percent below. In practical terms, these four CPUs would deliver nearly identical performance in Inside, since the game is not heavily threaded and the differences are within a fraction of a percent. The Ryzen 5 3600 sits in the 71st percentile among all CPUs, meaning it outperforms most processors on the market, but the closest matches show that upgrading to any of these rivals would not change the gaming experience in this title.
For the AMD Radeon RX 7600, the nearest GPU rivals are also close in average score. The NVIDIA GeForce RTX 3050 OEM scores 15199, which is 0.2 percent above the RX 7600's score. The AMD Radeon Pro 560X scores 15082, which is 0.6 percent below. The AMD Radeon 680M scores 15270, which is 0.7 percent above. The NVIDIA GeForce GTX 660 Ti scores 15063, which is 0.7 percent below. These delta percentages are all within a single percentage point, meaning that in Inside, any of these GPUs would produce frame rates within a few FPS of the RX 7600. The GPU sits in the 57th percentile among all GPUs, which is a solid mid-pack position. For a game like Inside, the differences between these rival GPUs would be imperceptible, as the frame rates are already so far above the playable threshold at most settings.
The practical takeaway is that if a user already has one of these rival CPUs or GPUs, the measured FPS data for the Ryzen 5 3600 and RX 7600 combination would apply almost identically. None of the rivals introduce a meaningful bottleneck or advantage in this specific game.
How This Combo Ranks
The database records this specific combination of CPU and GPU in Inside as rank 2755 out of 3716 tested combos. This places the pairing in the 74th percentile of all tested configurations, meaning it outperforms roughly three quarters of the combinations in the database for this game. The rank reflects the overall capability of the system, not just the CPU or GPU individually.
Given that Inside is a puzzle platformer from 2016, the game is not designed to stress modern hardware. The rank of 2755 out of 3716 indicates that many higher-end combinations, likely including newer CPUs and more powerful GPUs, do achieve higher frame rates. However, the measured data shows that this combo already delivers frame rates that exceed 60 FPS at every resolution and preset combination tested. The rank primarily differentiates between systems that are already playable, with the higher ranks representing those that push frame rates to extreme levels. For example, at 1080p Ultra, this combo averages 134 FPS, which is far beyond what a 60 Hz display can use. The rank would be higher if the game were more demanding, but for this title, the practical performance is already sufficient.
The rank also reflects the balance of the pairing. The CPU is in the 71st percentile, and the GPU is in the 57th percentile, so neither component is dramatically weaker than the other. In Inside, which is not a particularly GPU-intensive game, the CPU's relatively strong multi-threaded performance helps maintain high frame rates even at lower resolutions where CPU overhead matters more.
The Verdict
The verdict data clearly states that this PC can run Inside at every tested resolution and preset level. The playable threshold is 60 FPS, and the verdict by resolution confirms that all settings are playable at all three resolutions.
At 3840x2160, the playable settings include High, Low, Medium, and Ultra. The best settings are Ultra, with an average FPS of 61. This means a user can run the game at 4K with the highest preset and still stay above the 60 FPS line, though barely. If a user prefers more margin, dropping to High yields an average of 64 FPS, and Medium provides 102 FPS with a minimum of 87 FPS, which offers much more headroom for any scene complexity.
At 2560x1440, all settings are also playable, and the best settings are Ultra with an average FPS of 97. This is a comfortable margin above the threshold, and even the most demanding preset leaves room for consistent frame times. Low settings reach 203 FPS, which is suitable for high refresh rate monitors.
At 1920x1080, the best settings are Ultra with an average FPS of 134. All settings are playable, and even the lowest setting of 234 FPS is far beyond what most displays can show. The verdict is unambiguous: this system can run Inside at maximum settings at 1080p and 1440p, and at 4K Ultra it just barely clears the threshold with an average of 61 FPS.
The practical recommendation is that for 4K play, a user should consider Medium settings to ensure consistent performance above the threshold, since the minimum recorded FPS at Medium is 87. At High and Ultra, the averages are 64 and 61 FPS, but the lack of recorded minimums means there is some uncertainty about worst-case dips. The data does not specify whether those settings ever drop below 60 FPS, but the averages suggest they stay close to the line.
CPU and GPU Roles
The measured FPS data across resolutions and presets reveals how the CPU and GPU each contribute to performance in Inside. The game is not a demanding title, so the scaling patterns show where each component becomes more relevant.
Looking at the resolution scaling, the frame rates drop significantly as resolution increases. At Low settings, the average FPS goes from 234 at 1080p to 203 at 1440p and then to 127 at 4K. This steady decline indicates that the GPU is becoming more stressed as the pixel count increases. The drop from 1440p to 4K at Low settings is 76 FPS, which is a 37 percent reduction. This suggests that at low graphics presets, the GPU is the primary limiter at higher resolutions.
At Ultra settings, the scaling is similar but with lower absolute values. The average FPS goes from 134 at 1080p to 97 at 1440p to 61 at 4K. The drop from 1440p to 4K is 36 FPS, which is a 37 percent reduction, matching the Low settings scaling pattern. This consistency indicates that the GPU workload scales proportionally with resolution, and the CPU is not introducing a bottleneck at any resolution.
The settings scaling within a single resolution also shows the GPU's role. At 1080p, going from Low to Ultra reduces the average FPS from 234 to 134, a drop of 100 FPS. At 1440p, the drop is from 203 to 97, a reduction of 106 FPS. At 4K, the drop is from 127 to 61, a reduction of 66 FPS. The fact that the absolute frame rate at 4K Ultra is 61 FPS, just above the threshold, shows that the GPU is the limiting factor at that setting. If the CPU were the bottleneck, the frame rates would not scale so dramatically with resolution.
The CPU's role is more apparent at lower resolutions and lower settings. At 1080p Low, the frame rate of 234 FPS is high enough that the CPU's single-thread performance could become a factor, but the data does not show any signs of a CPU limitation. The Ryzen 5 3600 has a single-thread benchmark score of 696 in 3dMark, and its performance in Cinebench R23 single-core is 2124. These scores are sufficient to feed the GPU at these frame rates. The CPU's multi-threaded performance, with a Cinebench R23 multicore score of 15045, ensures that any background threads or game logic do not cause frame drops.
The key takeaway is that in Inside, the GPU matters more as resolution and settings increase, while the CPU is sufficient at all tested configurations. The fact that 4K Ultra produces an average of 61 FPS while 4K High produces 64 FPS shows that the GPU is near its limit at the highest settings, and the CPU is not the reason frame rates drop at higher resolutions.
FAQ
*Q: Can this system run Inside at 4K with maximum settings?*
A: Yes. The verdict data lists Ultra as playable at 3840x2160, with an average FPS of 61. This is just above the 60 FPS playable threshold, so it works, but there is little margin for frame dips.
Q: What is the best settings preset for 1440p play?
A: Ultra settings are the best option at 2560x1440, with an average FPS of 97. This is well above the 60 FPS threshold, so there is ample headroom for consistent performance.
Q: How does this combo compare to similar hardware in the database?
A: The CPU's nearest rivals, such as the Intel Core i5-11400, have average benchmark scores within 0.2 percent of the Ryzen 5 3600. The GPU's nearest rivals, like the NVIDIA GeForce RTX 3050 OEM, are within 0.2 percent of the RX 7600. These differences would translate to frame rate variations of only a few FPS in Inside.
Q: Is the frame rate stable at 1080p Medium settings?
A: The recorded data at 1920x1080 Medium shows an average of 216 FPS, with a minimum of 184 and a maximum of 249. The 65 FPS spread between minimum and maximum indicates some variation, but the minimum is far above the 60 FPS threshold, so stability is not a concern.
Q: Does the CPU or GPU limit performance more at 4K?
A: The GPU is the limiting factor at 4K. The average FPS drops from 127 at Low to 61 at Ultra, and the resolution scaling from 1440p to 4K shows large frame rate reductions, which indicates the GPU is handling the increased pixel workload.
Q: What is the highest setting that provides a comfortable margin above 60 FPS at 4K?
A: Medium settings at 3840x2160 produce an average of 102 FPS with a minimum of 87 FPS. This provides a comfortable margin above the 60 FPS threshold, unlike High and Ultra, which average 64 and 61 FPS respectively.