Instant compatibility check with FPS benchmarks and optimization tips
Hitman 2
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 38 | 48 | 61 |
| 1440p QHD | 52 | 65 | 87 | 114 |
| 1080p Full HD | 74 | 103 | 138 | 180 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Hitman 2 on Your System
The Intel Core i3-12100F and NVIDIA GeForce RTX 5060 combination ranks 1718th out of 3711 tested combos for Hitman 2, placing it in the upper half of all systems evaluated. This pairing lands at the 46th percentile among tested configurations, meaning roughly 54% of all tested combos deliver higher average frame rates in this game. The data indicates a system that handles the game competently at most settings, but with clear limits at the highest resolutions and presets where the GPU becomes the primary constraint.
How This Combo Ranks
The combo’s position at 1718 out of 3711 tested combos reflects a mid-pack standing for Hitman 2 specifically. This rank is driven by the GPU’s performance ceiling at 4K Ultra settings, where the average frame rate drops to 27.4 FPS — well below the 60 FPS playability threshold. At 1080p, however, the same combo ranks far more favorably in practice, delivering 74.1 FPS at Ultra settings, which is 23.5% above the 60 FPS mark. The data shows a system that is consistently capable at mainstream resolutions but loses ground at 4K, particularly when the preset climbs past Medium. The CPU’s strong single-thread performance helps maintain high frame rates at lower resolutions, but the GPU’s 8 GB memory and 128-bit bus become limiting factors as pixel count increases.
CPU and GPU Roles
Benchmark results show the GPU is the dominant factor at 3840x2160, where the average frame rate drops from 61.4 FPS at Low to 27.4 FPS at Ultra — a 55.4% reduction as settings scale up. This steep decline indicates the RTX 5060’s rendering throughput, not the i3-12100F’s processing power, dictates performance at 4K. The CPU’s 4 cores and 8 threads with a 4.30 GHz boost clock are sufficient to feed the GPU at this resolution, as evidenced by the Low preset achieving 61.4 FPS, but the GPU simply cannot maintain playable rates when texture and shading demands rise.
At 2560x1440, the balance shifts somewhat. The frame rate ranges from 113.7 FPS at Low to 52.1 FPS at Ultra, a 54.2% drop across presets. The GPU still leads the bottleneck, but the CPU begins to matter more at the Low preset, where 113.7 FPS approaches the i3-12100F’s practical ceiling for this game. The 3DMark benchmarks support this: the CPU scores 4026 in the 8-thread test and 893 in single-thread, indicating it can sustain high frame rates but will cap extremely high output. At 1920x1080, the CPU’s role grows further — the Low preset hits 179.6 FPS, and the gap between Low and Medium (179.6 to 138.4 FPS) shows the GPU still has headroom, but the Ultra preset at 74.1 FPS suggests the CPU is no longer the limiting factor at this resolution. The data indicates that for 1080p gameplay, the i3-12100F and RTX 5060 are well matched, with neither component consistently holding the other back.
Similar Performance Alternatives
The CPU’s nearest rivals in the benchmark database include the Intel Core 3 N355, which scores 13492 versus the i3-12100F’s 13494 — a negligible 0% difference. The Intel Core i5-9500 scores 13452, sitting 0.3% behind, while the Intel Core 5 120UL scores 13594, 0.7% ahead. The Intel Core i7-1250U scores 13351, 1.1% behind. These four processors would behave nearly identically in Hitman 2, meaning users with any of these CPUs paired with an RTX 5060 should expect frame rates within 1-2 FPS of each other at any given resolution and preset. The i3-12100F’s 12 MB of shared L3 cache and Alder Lake architecture give it a slight edge in single-thread workloads, but the benchmark deltas are too small to matter in practice.
On the GPU side, the RTX 5060’s nearest rivals are more varied. The AMD Radeon 860M scores 26401 against the RTX 5060’s 26331, a 0.3% difference. The NVIDIA GeForce MX550 scores 26421, also 0.3% ahead. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, 0.8% ahead, while the AMD Radeon RX 6750 XT scores 26011, 1.2% behind. These deltas translate to sub-1 FPS differences in Hitman 2 at most settings, so any of these GPUs paired with the i3-12100F would produce nearly identical results. The RX 5700 XT 50th Anniversary’s slightly higher score suggests it might edge out the RTX 5060 by 1-2 FPS in the most demanding 4K Ultra scenarios, but the difference would be imperceptible in gameplay. For builders considering alternatives, the data shows that swapping the CPU or GPU to any of these near-equivalents would not meaningfully change the playability verdict at any resolution.
The Verdict
This PC can run Hitman 2, but the playable envelope depends heavily on resolution and preset. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with Ultra averaging 74.1 FPS. This is the resolution where the combo shines, offering smooth gameplay at maximum settings. At 2560x1440, three presets are playable: Low (113.7 FPS), Medium (86.5 FPS), and High (64.7 FPS), but Ultra falls to 52.1 FPS, below the 60 FPS mark. At 3840x2160, only Low achieves playability at 61.4 FPS; Medium drops to 47.8 FPS, High to 37.6 FPS, and Ultra to 27.4 FPS. The verdict is clear: 1080p Ultra and 1440p High are the sweet spots, while 4K requires dropping to Low settings for a playable experience. Users targeting 4K should consider this combo only if they are willing to accept Low presets or reduce resolution scaling.
Measured FPS Breakdown
At 3840x2160, the measured average frame rates are as follows: Low preset averages 61.4 FPS, Medium averages 47.8 FPS, High averages 37.6 FPS, and Ultra averages 27.4 FPS. The progression from Low to Ultra shows a 55.4% reduction in average frame rate, with the largest single drop occurring between Medium and High (47.8 to 37.6 FPS, a 21.3% decrease). No minimum or maximum frame rate data is available for this resolution, so the averages represent the only measured metric.
At 2560x1440, the averages are: Low at 113.7 FPS, Medium at 86.5 FPS, High at 64.7 FPS, and Ultra at 52.1 FPS. The drop from High to Ultra is 19.5%, which is the steepest decline across presets at this resolution. The difference between Low and Medium is 27.2 FPS, indicating diminishing returns as settings increase. At 1920x1080, the averages are: Low at 179.6 FPS, Medium at 138.4 FPS, High at 102.5 FPS, and Ultra at 74.1 FPS. The gap between Low and Medium is 41.2 FPS, while the gap between High and Ultra is 28.4 FPS — the latter being the smallest drop between consecutive presets at any resolution, suggesting the Ultra preset’s additional demands are relatively modest at 1080p.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, with an average of 61.4 FPS. This is the only playable option at this resolution; Medium falls to 47.8 FPS, which is 20.3% below the threshold. Users at 4K must accept Low settings for smooth gameplay, though the 61.4 FPS average leaves only 1.4 FPS of headroom above the 60 FPS mark, so frame time spikes could occasionally dip below playable levels.
At 2560x1440, the most demanding playable preset is High, averaging 64.7 FPS. This provides 4.7 FPS of headroom above the threshold, which is adequate but not generous. Medium at 86.5 FPS offers a more comfortable margin, while Low at 113.7 FPS is the safest choice for maintaining high frame rates. Ultra at 52.1 FPS is not playable, so users should avoid it unless they are willing to tolerate stutter.
At 1920x1080, the most demanding playable preset is Ultra, averaging 74.1 FPS. This gives 14.1 FPS of headroom above the 60 FPS mark, offering a stable experience with maximum visual fidelity. High at 102.5 FPS, Medium at 138.4 FPS, and Low at 179.6 FPS all provide progressively larger margins, but Ultra is the recommended choice for this resolution since it maintains playability while maximizing quality. The data shows that 1080p Ultra is the only configuration where the combo delivers both maximum settings and a comfortable frame rate cushion.