Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Hard West
Turn-Based Tactics 2015

Hard West

51%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
134 FPS
Ultra 1080p Measured
63 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
40 FPS

4K (Ultra HD)

Low 4K Measured
44 FPS
Ultra 4K Measured
21 FPS
11.9ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,497
Your CPU 13,494
Graphics Card
Required 28,017
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 21 28 36 44
1440p QHD 40 53 69 85
1080p Full HD 63 84 110 134

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 84
1920x1080 Low 134
1920x1080 Medium 110
1920x1080 Ultra 63
2560x1440 High 53
2560x1440 Low 85
2560x1440 Medium 69
2560x1440 Ultra 40
3840x2160 High 28
3840x2160 Low 44
3840x2160 Medium 36
3840x2160 Ultra 21

Performance Analysis: Hard West on Your System

Intel Core i3-12100F with Intel Arc B570 delivers playable performance across most of Hard West’s tested configurations, but the data reveals a sharp drop-off at 4K where no preset reaches the 60 FPS threshold. At 1080p, the combo clears 60 FPS on every setting, even Ultra, while 1440p offers a solid Medium preset at 69 FPS average. The measured results show a turn-based tactics title that scales predictably with resolution, though the GPU’s workload dominates at higher pixel counts, leaving the quad-core CPU with headroom.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 63 FPS. This is the ceiling for this resolution—pushing further is not possible since Ultra is the highest tested setting. The margin above the playability threshold is narrow at just 3 FPS, but the average holds steady, and the lack of min/max data for Ultra suggests the benchmark recorded a stable run. For a turn-based game, even occasional dips below 60 would be less disruptive than in fast-paced genres, but the data here shows the average itself is sufficient.

At 2560x1440, the best preset that maintains 60 FPS is Medium, averaging 69 FPS. This is a comfortable margin over the threshold, and the min/max range of 59 to 80 FPS indicates that while the average is safe, the lowest recorded frame sits just 1 FPS below the target. High settings at this resolution drop to 53 FPS average, which fails the 60 FPS requirement, so Medium is the optimal choice for smooth gameplay. The jump from Medium to High costs 16 FPS on average, which is a significant penalty for one step up in quality.

At 3840x2160, no preset reaches 60 FPS. The closest is Low at 44 FPS average, followed by Medium at 36 FPS, High at 28 FPS, and Ultra at 21 FPS. The verdict data confirms this: the playable settings list for 4K is empty. Even the lowest quality setting falls 16 FPS short of the threshold, making 4K unplayable by the 60 FPS standard. The scaling from Low to Ultra shows a 23 FPS drop, indicating that the GPU is heavily taxed at this resolution across all quality levels.

FAQ

Q: Can this PC run Hard West at 1080p with maximum settings?

A: Yes. At 1920x1080, the Ultra preset averages 63 FPS, which is above the 60 FPS playable threshold. All four tested settings—Low, Medium, High, and Ultra—clear 60 FPS at this resolution, with averages ranging from 134 FPS (Low) to 63 FPS (Ultra).

Q: What is the best playable setting at 1440p?

A: Medium is the highest preset that maintains 60 FPS, averaging 69 FPS. Low also qualifies at 85 FPS, but High falls short at 53 FPS, and Ultra drops to 40 FPS. The Medium preset’s min/max of 59 to 80 FPS shows it hovers near the threshold at its lowest point.

Q: Is 4K playable with this hardware?

A: No. At 3840x2160, the best average FPS is 44 FPS on Low settings, which is below the 60 FPS threshold. Medium averages 36 FPS, High 28 FPS, and Ultra 21 FPS. The verdict lists no playable settings for 4K.

Q: How does the combo rank among all tested systems for this game?

A: It ranks 2998 out of 3722 tested combos. This places it in the lower portion of the database, though it still achieves playable results at 1080p and 1440p for most settings.

Q: Which component is more stressed at higher resolutions?

A: The GPU, Intel Arc B570, shows a clear workload increase as resolution rises. At 1080p Medium the average FPS is 110, dropping to 69 FPS at 1440p Medium and 36 FPS at 4K Medium—a 74 FPS total decline. The CPU, Intel Core i3-12100F, has ample headroom given the game’s turn-based nature and the relatively low thread utilization.

Q: What is the FPS difference between Low and Ultra at 1080p?

A: The gap is 71 FPS. Low averages 134 FPS while Ultra averages 63 FPS. This shows the full range of visual quality options at 1080p, with even the highest preset remaining playable.

Measured FPS Breakdown

At 1920x1080, the data shows a full spread of playable results. Low settings produce an average of 134 FPS, Medium averages 110 FPS with a min/max of 93 to 126 FPS, High averages 84 FPS, and Ultra averages 63 FPS. The progression from Low to Ultra costs 71 FPS, but every step remains above the 60 FPS threshold. The Medium preset’s min of 93 FPS is notably higher than the Ultra average, indicating that the lower settings provide substantial performance headroom. The lack of min/max values for Low, High, and Ultra in the measured data suggests those runs were stable enough to record only averages, though this is not explicitly confirmed.

At 2560x1440, the performance drops become more pronounced. Low averages 85 FPS, Medium averages 69 FPS with a min/max of 59 to 80 FPS, High averages 53 FPS, and Ultra averages 40 FPS. Only Low and Medium clear the 60 FPS threshold. The Medium preset’s minimum of 59 FPS is technically below the playable standard, but the average remains safe. The step from Medium to High is a 16 FPS loss, while High to Ultra costs another 13 FPS. This resolution shows a clearer boundary between playable and non-playable settings, with High and Ultra falling short.

At 3840x2160, all settings fail the 60 FPS requirement. Low averages 44 FPS, Medium averages 36 FPS with a min/max of 31 to 42 FPS, High averages 28 FPS, and Ultra averages 21 FPS. The Medium preset’s max of 42 FPS is still below the threshold, confirming that even the best-case frame times cannot reach playable levels. The scaling from Low to Ultra is steep: 23 FPS total, with each step down in quality providing roughly 7-8 FPS gains. The 4K results suggest the Intel Arc B570’s 10 GB memory and 380.0 GB/s bandwidth are insufficient for this game’s demands at that resolution, though the frame rates are consistent enough for a turn-based title if the user accepts lower performance.

Similar Performance Alternatives

The Intel Core i3-12100F sits near several comparable CPUs in benchmark scores. Its nearest rival is the Intel Core 3 N355, which has an average score of 13492 versus the i3-12100F’s 13494, a delta of 0%. The Intel Core i5-9500 scores 13452, just 0.3% lower, while the Intel Core 5 120UL is 0.7% higher at 13594. The Intel Core i7-1250U trails by 1.1% with 13351. For Hard West, any of these processors would deliver nearly identical CPU performance, meaning the game’s frame rates would be unchanged in CPU-limited scenarios. Given that the i3-12100F’s 4 cores and 8 threads are not heavily taxed in this turn-based title, even the lower-scoring rivals would likely produce the same measured FPS.

The Intel Arc B570 GPU has closer competition. Its nearest rival is the NVIDIA GeForce RTX 3070 Mobile, with an average score of 20534 versus the B570’s 20556, a delta of 0.1%. The Intel Arc A750 is just 0.1% behind at 20582, while the NVIDIA Quadro M4000M scores 20480 (0.4% lower) and the AMD Radeon R9 M390X scores 20662 (0.5% higher). These deltas are all within 1%, so users with any of these GPUs would see nearly identical performance in Hard West. The Arc A750 is particularly relevant as a desktop alternative, sharing the same Intel architecture and likely similar driver behavior. The RTX 3070 Mobile’s close score suggests that laptop users with that GPU could expect comparable results, though the power and thermal characteristics differ.

How This Combo Ranks

The combination of Intel Core i3-12100F and Intel Arc B570 ranks 2998 out of 3722 tested combos for Hard West. This places it in the bottom 19.5% of all systems in the database, which aligns with the 4K results showing no playable settings. However, the rank does not tell the full story: at 1080p, this combo outperforms many higher-ranked systems because the game is not demanding at that resolution. The percentile data shows the CPU sits at the 68th percentile among all CPUs, and the GPU at the 65th percentile among all GPUs, meaning both components are mid-range in their respective pools. The combo’s low rank likely reflects that the database includes many systems with more powerful GPUs that can handle 4K, while this pairing cannot. For 1080p and 1440p gaming, the rank understates the practical performance, as the measured FPS shows smooth gameplay at those resolutions.

The Verdict

Yes, this PC can run Hard West, but the experience depends heavily on resolution. At 1920x1080, all four tested presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, with averages from 134 FPS down to 63 FPS. This is the ideal resolution for this combo, offering full graphical fidelity without sacrificing playability. At 2560x1440, the system remains playable on Low (85 FPS) and Medium (69 FPS), but High (53 FPS) and Ultra (40 FPS) fall short. The best playable setting is Medium, which provides a good balance of quality and performance. At 3840x2160, the verdict is clear: no settings are playable, with the best average being 44 FPS on Low. Users targeting 4K would need a more powerful GPU, as the Arc B570 cannot maintain 60 FPS even at the lowest quality.

For a turn-based tactics game, the 60 FPS threshold may be stricter than necessary—Hard West’s gameplay does not demand twitch reflexes. The 4K Low result of 44 FPS would still be a functional experience for many players, but by the database’s standard, it fails. The 1440p Medium result of 69 FPS with a 59 FPS minimum is the most balanced option, offering a high resolution with a comfortable average. The 1080p Ultra result of 63 FPS is the best visual experience that still meets the playability bar, making it the recommended configuration for users who prioritize image quality.

CPU and GPU Roles

The data indicates that the Intel Arc B570 GPU is the primary bottleneck at higher resolutions, while the Intel Core i3-12100F CPU has ample headroom. Comparing the FPS scaling across resolutions at Medium settings: 1080p averages 110 FPS, 1440p drops to 69 FPS, and 4K falls to 36 FPS. This is a 74 FPS decline from 1080p to 4K, a 67% reduction, which points to the GPU being saturated as pixel count increases. The CPU’s role is less evident because the game is turn-based and likely does not stress all 4 cores and 8 threads heavily. The i3-12100F’s single-thread performance, as shown by its 3dmark single-thread score of 893, is sufficient for the game’s logic, but the GPU must handle rendering at each resolution.

At 1080p, the CPU and GPU are both likely underutilized, given that even Ultra averages 63 FPS and Low reaches 134 FPS. The 71 FPS gap between Low and Ultra suggests the GPU is doing more work at higher settings, but the CPU is not limiting—otherwise the FPS would plateau regardless of settings. At 1440p, the GPU becomes more stressed, as seen in the Medium preset’s 59 FPS minimum, which is close to the threshold. The fact that High drops to 53 FPS while Medium stays at 69 FPS shows a significant GPU workload increase with quality settings. At 4K, the GPU is clearly the limiting factor, as even Low cannot reach 60 FPS. The CPU’s 12 MB of shared L3 cache and 4 cores are not the constraint; the Arc B570’s 11.52 TFLOPS FP32 performance is simply insufficient for 4K in this game.

The scaling between presets also reveals the GPU’s dominance. At 1080p, the Ultra-to-Low delta is 71 FPS; at 1440p, the same delta is 45 FPS (85 to 40); at 4K, it is 23 FPS (44 to 21). The shrinking delta at higher resolutions indicates that the GPU is hitting a raw throughput ceiling, where quality settings matter less than the sheer pixel count. For users seeking better 4K performance, upgrading the GPU would be the priority, while the CPU could likely handle a more powerful card without bottlenecking in this game. At 1080p and 1440p, the current pairing is well balanced, with the GPU providing enough headroom for the CPU’s capabilities.