Instant compatibility check with FPS benchmarks and optimization tips
Greedfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 43 | 42 | 60 |
| 1440p QHD | 46 | 70 | 77 | 94 |
| 1080p Full HD | 61 | 99 | 109 | 140 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Greedfall on Your System
Intel Core i5-12600KF and NVIDIA GeForce RTX 2060 form a combination that lands in the 2893rd position out of 3703 tested configurations for Greedfall. That places this pairing in the lower-middle tier of the database, meaning it is far from the fastest setups recorded, yet it still delivers playable performance at several common resolutions. The CPU sits at the 79th percentile among all processors tested, while the GPU rests at the 58th percentile among all graphics cards. These percentile positions suggest a system where the processor has more headroom than the graphics card, a dynamic that becomes evident when examining frame rates across different settings and resolutions.
How This Combo Ranks
The recorded combination rank of 2893 out of 3703 indicates that roughly 78 percent of tested configurations outperform this pairing in Greedfall. This is not a top-tier result, but it is also not a failing one. The rank reflects the balance between a strong 10-core, 16-thread processor and a mid-range graphics card from the previous generation. In the database, this combo outperforms the bottom quarter of all tested systems, which is a meaningful distinction for a game released in 2019.
What this rank means in practical terms is that the system will handle the game at 1080p and 1440p with adjustable settings, but 4K presents a challenge. The data shows that at 3840x2160, only the Low preset approaches the 60 FPS threshold, and even then it falls just short. The rank does not tell the whole story, however, because the frame rate results vary widely depending on the preset chosen. At 1080p, this combo achieves playable frame rates across all four tested presets, which is a better outcome than the raw rank might suggest. At 1440p, three of the four presets remain playable. At 4K, none of the presets reach the 60 FPS line.
The percentile rankings for the individual components provide context. The CPU at the 79th percentile means it sits above most processors in the database for general benchmark performance. The GPU at the 58th percentile places it in the middle of the field. This gap between CPU and GPU performance explains why the system struggles more at higher resolutions, where the graphics card becomes the limiting factor.
CPU and GPU Roles
The division of labor between the Intel Core i5-12600KF and the NVIDIA GeForce RTX 2060 becomes clear when comparing frame rates across resolutions and presets. At 1920x1080, the system produces 140.3 FPS on Low settings, which is a very high frame rate that indicates the GPU is not being fully taxed. The CPU has enough headroom to feed the graphics card efficiently at this resolution. Moving to Medium at 1080p drops the frame rate to 109 FPS, and High produces 99.1 FPS. These are strong results that suggest both components are working well together.
At 2560x1440, the frame rates drop noticeably but remain respectable. Low settings yield 93.9 FPS, Medium produces 77.3 FPS, and High achieves 69.5 FPS. The scaling from 1080p to 1440p shows a reduction of roughly 33 percent on Low settings, 29 percent on Medium, and 30 percent on High. This consistent reduction points to the GPU becoming more significant as the pixel count increases. The CPU still has performance to spare, but the RTX 2060 must work harder to fill the additional pixels.
The 4K results confirm the GPU bottleneck. At 3840x2160, Low settings produce 59.5 FPS, which is just under the 60 FPS threshold. Medium drops to 42.4 FPS, High to 42.6 FPS, and Ultra falls to 23.4 FPS. The scaling from 1440p to 4K is severe: Low loses 37 percent of its frame rate, Medium loses 45 percent, High loses 39 percent, and Ultra loses 50 percent. These steep drops indicate that the RTX 2060 simply does not have enough memory bandwidth or shading power for 4K at higher presets. The 6 GB GDDR6 memory and 192-bit bus are the limiting factors here, not the processor.
The pattern across resolutions shows that the CPU is more important at 1080p, where frame rates exceed what the GPU alone would typically deliver. At 1440p, the balance shifts toward the GPU, and at 4K, the GPU is the dominant constraint. Users who want to play at 1080p with maximum settings will find the system well matched, while those seeking 1440p should stick to High or lower presets.
Similar Performance Alternatives
The database records several processors and graphics cards that perform within a narrow margin of this pairing. For the CPU, the Intel Core i9-10900K achieves an average benchmark score of 27872, which is 0.3 percent lower than the i5-12600KF. The AMD Ryzen 7 5800X3D scores 27896, also 0.3 percent lower. The AMD Ryzen 7 6800U scores 27887, again 0.3 percent lower, and the AMD Ryzen 5 8500GE scores 27712, which is 0.3 percent higher. These four alternatives all sit within a fraction of a percent of the i5-12600KF in terms of average benchmark score, meaning they would behave nearly identically in Greedfall at the tested resolutions.
For the GPU, the closest rival is the NVIDIA GeForce GTX 580, which has an average score of 15283, exactly matching the RTX 2060's 15290 with a delta of 0 percent. The AMD Radeon 680M scores 15270, which is 0.1 percent lower. The NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6 percent lower, and the AMD Radeon RX 7600 scores 15171, 0.8 percent lower. These differences are negligible in real-world gaming, so any of these graphics cards would produce frame rates within a few percent of the RTX 2060 in Greedfall.
What this means for users is that swapping the CPU to any of the listed rivals would not change the gaming experience in any meaningful way. The same applies to the GPU. The system's overall performance in Greedfall is defined more by the combination's position in the database than by any single component. A user with an i9-10900K or a Ryzen 7 5800X3D paired with an RTX 2060 would see nearly identical frame rates. Similarly, using a GTX 580 or an RX 7600 with the i5-12600KF would produce results that are indistinguishable from the recorded data.
The Verdict
The question of whether this PC can run Greedfall has a clear answer based on the recorded measurements. At 1920x1080, the system clears the 60 FPS threshold on every preset. Low settings produce 140.3 FPS, Medium produces 109 FPS, High produces 99.1 FPS, and even Ultra stays above the line at 61.2 FPS. This means the game is fully playable at 1080p with maximum settings, and users can expect smooth performance without needing to compromise on visual quality.
At 2560x1440, the system remains playable on three of the four presets. High settings achieve 69.5 FPS, Medium achieves 77.3 FPS, and Low achieves 93.9 FPS. Ultra falls below the threshold at 46.4 FPS, so users who want to play at 1440p should avoid the highest preset. The best setting at this resolution is High, which provides the highest visual quality while maintaining a comfortable margin above 60 FPS.
At 3840x2160, the system does not reach 60 FPS on any preset. Low settings come closest at 59.5 FPS, which is just 0.5 FPS short of the playable threshold. Medium produces 42.4 FPS, High produces 42.6 FPS, and Ultra produces 23.4 FPS. For 4K gaming, this combination is not suitable, and users would need to lower the resolution or accept sub-60 FPS performance.
The verdict is that this PC runs Greedfall well at 1080p and 1440p, but not at 4K. The 60 FPS threshold is a clear divider, and the system crosses it at 1080p across all presets and at 1440p for all but the Ultra preset.
Measured FPS Breakdown
The recorded frame rates provide a complete picture of performance across three resolutions and four presets. At 1920x1080, the system produces an average of 140.3 FPS on Low, 109 FPS on Medium, 99.1 FPS on High, and 61.2 FPS on Ultra. These numbers show a steady decline as settings increase, with Ultra requiring more than double the rendering workload of Low.
At 2560x1440, the averages are 93.9 FPS on Low, 77.3 FPS on Medium, 69.5 FPS on High, and 46.4 FPS on Ultra. The gap between Low and Ultra at this resolution is 47.5 FPS, which is a larger absolute difference than at 1080p where the gap is 79.1 FPS. The relative drop from Low to Ultra is about 51 percent at 1440p, compared to 56 percent at 1080p.
At 3840x2160, the averages are 59.5 FPS on Low, 42.4 FPS on Medium, 42.6 FPS on High, and 23.4 FPS on Ultra. Interestingly, Medium and High produce nearly identical frame rates at 4K, which suggests that the GPU is saturated and additional settings changes have minimal impact. The drop from Low to Medium is 17.1 FPS, while the drop from High to Ultra is 19.2 FPS.
The database does not include minimum or maximum frame rate values for any of these measurements, so the analysis relies solely on average FPS. This means the data does not capture frame time spikes or stutter, but the averages are consistent enough to draw reliable conclusions about playability.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 61.2 FPS. This is the highest quality setting available, and the system maintains a narrow but sufficient margin above the playable threshold. Users can enjoy the game at maximum visual fidelity without dropping below 60 FPS on average.
At 2560x1440, the best setting is High, which achieves 69.5 FPS. This provides a comfortable 9.5 FPS margin above the threshold and delivers better visual quality than Medium or Low. Ultra falls short at 46.4 FPS, so High is the recommended choice for 1440p.
At 3840x2160, no preset reaches 60 FPS. The best option is Low at 59.5 FPS, which is 0.5 FPS below the threshold. Since the requirement is to stay at or above 60 FPS, there is no recommended preset for 4K. Users who insist on 4K would need to accept a frame rate slightly below the playable line or reduce the resolution.
FAQ
Q: Can this PC run Greedfall at 1080p with Ultra settings?
A: Yes. The recorded average FPS at 1920x1080 with Ultra settings is 61.2, which clears the 60 FPS playable threshold.
Q: What is the best preset for 1440p gaming?
A: High settings at 2560x1440 produce an average of 69.5 FPS, making it the highest preset that maintains playable performance. Ultra drops to 46.4 FPS and is not recommended.
Q: Does this system handle 4K resolution?
A: No. At 3840x2160, the highest average FPS is 59.5 on Low settings, which is below the 60 FPS threshold. No preset at 4K reaches playable frame rates.
Q: How does the CPU compare to similar processors in the database?
A: The Intel Core i5-12600KF has an average benchmark score of 27799, placing it at the 79th percentile. Its nearest rivals include the Intel Core i9-10900K and AMD Ryzen 7 5800X3D, both within 0.3 percent of its score.
Q: How does the GPU compare to similar graphics cards?
A: The NVIDIA GeForce RTX 2060 has an average benchmark score of 15290, placing it at the 58th percentile. The NVIDIA GeForce GTX 580 matches it exactly, while the AMD Radeon RX 7600 is 0.8 percent lower.
Q: What frame rate can I expect at 1080p with Medium settings?
A: The recorded average FPS at 1920x1080 with Medium settings is 109, which provides a large margin above the 60 FPS playable threshold.